HomeProductsPosition switches and multiple limit switchesMultiple limit switch, upright SNSN05D12-502AM-M

SN05D12-502AM-M (Order no. 088752)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

Series SN...AM, 12 mm, mechanical, with exterior diaphragm

With exterior diaphragm
Plunger spacing 12 mm
Upright housing, small flange
Degree of protection IP67 according to IEC 60529

Description

Exterior diaphragm

The exterior diaphragm protects the plunger guide against the entry of very fine dust (dust from grinding, casting, glass, etc.) and prevents the plunger from seizing. At the same time, plunger sticking, caused by resinous lubricating coolants, can be prevented with this exterior diaphragm version.

Switching element

ES 502 E

Snap-action switching contact 1 NC + 1 NO

Dimensional drawings

1	Operating point
2	Free position
3	Dog
4	n Number of plungers

Connection examples

Technical data

Approvals

Electrical connection values

Connection cross section	0.34 ... 1.5 mm²
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	2.5 kV
Utilization category
AC-12	8 A 250 V
AC-15	6 A 230 V
DC-13	6 A 24 V
Short circuit protection according to IEC 60269-1	8A gG
Switching current
min. at DC 12V	min. 10 mA
thermal rated current I_th	8 A

Mechanical values and environment

Approach speed	0.01 ... 20 m/min
Connection type
2 x	M20 x 1.5
Number NC contacts	5
Number of switching elements	5
Number of NO contacts	5
Design	upright
Actuating element	Chisel plunger (Operating point accuracy ± 0.002. The reproducible operating point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2,000 operating cycles.)
Actuating force	min. 20 N
Installation orientation	any
Mechanical life	30 x 10⁶
Switching principle	Snap-action switching contact (Contact closing time<4 ms contact bounce time<3 ms)
Degree of protection	IP67
Plunger spacing	12 mm
Ambient temperature	-5 ... +80 °C
Material
Contact	Silver alloy, gold flashed
Housing	Die-cast aluminum, anodized

Miscellaneous

Additional feature	(Exterior diaphragm = AM. The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)

Additional feature

(Exterior diaphragm = AM. The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 1,8 MB)