HomeProductsEnabling switchZSM with numerous control functionsZSM2101-099715

ZSM2101-099715 (Order no. 099715)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

ZSM, LED, + and - buttons, vibration motor, stop command device, key-operated rotary switch

3-stage function
Stop command device
Vibration signal
LED indicator
+ and – buttons
Key-operated rotary switch
Straight connecting cable, 5 m

Description

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Stop command device

Machine stop (gray/yellow, with pull-to-reset and turn-to-reset) on the switch housing, for different wiring concepts.

Lower position, protected by anti-kink strain relief in case of a fall.

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

+ and – buttons

These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.

Key-operated rotary switch

For individual use, e.g. as an operating mode selector.

Cable

The high-quality connecting cables are available in a straight version.

Dimensional drawings

Connection examples

Technical data

Approvals

Operating and display elements

Color	Version	Number
	Key-operated rotary switch	1
	+ button	1
	Vibration motor	1
	- button	1
gray	Machine stop	1
Yellow	LED	1

Electrical connection values

Connecting cable	23x0.14 mm² (screened)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Utilization category
DC-13	24 V 0.01 A (For additional indicators)
DC-13	30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13	24 V 0.3 A (For additional controls)
Short circuit protection according to IEC 60269-1	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Connection type	flying lead
Number of changeover contacts	3 (Connection as per block diagram)
Cable length
straight	5 m
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Degree of protection	IP54
Ambient temperature	-5 ... +60 °C
Material	PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Enabling switch
B_10D	0.1 x 10⁶
	Machine stop gray
B_10D	0.1 x 10⁶

Miscellaneous

in compliance with	60947-5-8

in compliance with

60947-5-8

Accessories

Connection material

Blanking plug RC17 for covering the flange connector RC17

096159
BLINDSTECKER 17-POL RC-17P1N8A83NN

Plug connector RC17 for connection to enabling switches, for example

096481
STECKVERBINDER 17POL RC-17P1N8A80CP

Mounting accessories

Holder for ZSM

102965
HALTER MIT MAGNET ZSM

Magnet mounting

102969
HALTER ZSM

Screw mounting

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 3,2 MB)