HomeProductsEnabling switchZSM with numerous control functionsZSM4204-102966

ZSM4204-102966 (Order no. 102966)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

ZSM, pushbuttons, LED, vibration motor, stop command device

3-stage function
Stop command device
Vibration signal
LED indicator
Pushbuttons
Straight connecting cable, 5 m

Description

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Stop command device

Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.

Upper position for rapid access in an emergency

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

Pushbuttons

Additional functions can be run directly at the enabling switch using the pushbuttons.

Cable

The high-quality connecting cables are available in a straight version.

Dimensional drawings

Connection examples

Technical data

Approvals

Operating and display elements

Color	Version	Number
White	Pushbutton	1
	Vibration motor	1
	Emergency stop device	1
Yellow	LED	1

Electrical connection values

Connecting cable	23x0.14 mm² (screened)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Utilization category
DC-13	24 V 0.3 A (For additional controls)
DC-13	30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13	24 V 0.01 A (For additional indicators)
Short circuit protection according to IEC 60269-1	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Connection type	flying lead
Number of changeover contacts	3 (Connection as per block diagram)
Cable length
straight	5 m
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Degree of protection	IP54
Ambient temperature	-5 ... +60 °C
Material	PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Emergency stop
B_10D	0.1 x 10⁶
	Enabling switch
B_10D	0.1 x 10⁶

Miscellaneous

in compliance with	60947-5-8

in compliance with

60947-5-8

Accessories

Connection material

Blanking plug RC17 for covering the flange connector RC17

096159
BLINDSTECKER 17-POL RC-17P1N8A83NN

Plug connector RC17 for connection to enabling switches, for example

096481
STECKVERBINDER 17POL RC-17P1N8A80CP

Mounting accessories

Holder for ZSM

102965
HALTER MIT MAGNET ZSM

Magnet mounting

102969
HALTER ZSM

Screw mounting

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 3,2 MB)