Safety switch TQ, connection cable, connecting cable 5m
- Connecting cable, 5 m
- Auxiliary release from 3 sides
- Switching element 1211S
- LED indicator
- Open-circuit current principle
Description
Approach direction
Vertical
Guard locking principle
Operating current (power to lock): In the case of a safety guard with guard locking according to the open-circuit current principle, the safety guard is locked until the power supply to the guard locking solenoid is break-before-make. The guard is unlocked by spring force. This is also referred to as electrical guard locking.
Guard locking for process protection
The safety switch meets the requirements for interlocking devices with guard locking for process protection. It has no safety monitoring of the guard locking.
Switching element
1211S | Slow-action switching contact |
Contacts for guard locking: 1 NC contact 1 NO contact | |
Contacts for door monitoring: 2 positively driven, positively driven contacts |
1 NO contactLED indicator
The LED indicator illuminates when voltage is applied to the guard locking solenoid.
Auxiliary release with triangular wedge
The auxiliary release allows access to the machine in the event of a malfunction, e.g. a power failure. It is unlocked using a tool or a key. The auxiliary release must be secured against misuse (sealing, laking).
Scope of delivery
Triangular key for manual release is included in the scope of delivery.
Required accessories
Actuator is not included in the scope of delivery.
Dimensional drawings
| 1 | Triangular key |
Connection examples
Technical data
Approvals
Electrical connection values
| Power consumption | 2.7 W |
| Rated insulation voltage Ui | 300 V |
| Rated impulse voltage Uimp | 2.5 kV |
| Utilization category | |
| DC-13 Monitoring contact | 0.22 A 125 V |
| DC-13 Safety contact | 0.27 A 250 V |
| AC-15 Monitoring contact | 1 A 125 V |
| AC-15 Safety contact | 0.75 A 250 V |
| Short circuit protection according to IEC 60269-1 | 2A gG |
| Solenoid operating voltage | |
| DC | 24 V -15% ... +10% |
| Solenoid duty cycle | 100 % |
| Switching voltage | |
| min. at 10 mA | 12 V |
| Switching current | |
| min. at 24 V | 1 mA |
| thermal rated current Ith | 2.5 A |
Mechanical values and environment
| Approach speed | 3 ... 60 m/min |
| Connection type | Connecting cable, 5 m |
| Number of guard lock monitoring NC contacts | 1 |
| Number of door position NO contacts | 1 |
| Number of guard lock monitoring NO contacts | 1 |
| Number of door position positively driven contacts | 2 |
| Extraction force | 10 N |
| Actuation frequency | max. 900 1/h |
| Actuating force | 5 N |
| Installation orientation | any |
| Insertion depth | 26.3 mm |
| Mechanical life | 1 x 10⁶ |
| Retention force | 1 N |
| Switching principle | Slow-action switching contact |
| Degree of protection | IP67 |
| Ambient temperature | -20 ... +50 °C |
| Material | |
| Housing | Reinforced thermoplastic |
| Contact | Silver alloy, gold flashed |
| Locking force Fmax | 500 N |
| Guard locking principle | Open-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| B10D | Mission time | |
|---|---|---|
| Monitoring of the guard position | 2x106 | 20 y |
| Important! Values valid for DC-12 100 mA/24V | ||
In combination with actuator ACTUATOR-Q-WTB
| Horizontal overtravel | 1.3 mm |
In combination with actuator ACTUATOR-Q-GT, HINGED ACTUATOR-Q-RO, HINGED ACTUATOR-Q-LU, ACTUATOR-Q-WT
| Horizontal overtravel | 1.9 mm |
Accessories
BETAETIGER-Q-GT
- With rubber bush
- Minimum door radius 160 mm
- Maximum locking force 500 N
- Mounting aid included
BETAETIGER-Q-WT
- With rubber bush
- Minimum door radius 160 mm
- Maximum locking force 500 N
- Mounting aid included
BETAETIGER-Q-WTB
- With rubber bush
- Minimum door radius 160 mm
- Maximum locking force 500 N
- With mounting plate
- Mounting aid included
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Mode d’emploi Interrupteur de sécurité TQ…
Manual de instrucciones Interruptor de seguridad TQ…
Betriebsanleitung Sicherheitsschalter TQ…
Istruzioni di impiego Finecorsa di sicurezza TQ…
Other Documents
CAD data
Ordering data
| Ordernumber | 104751 |
| Item designation | TQ2-1211SG024-5000 |
| Gross weight | 0,577kg |
| Customs tariff number | 85365019000 |
| ECLASS | 27-27-26-03 Safety switch with guard control |
