ZSM, pushbuttons, stop command device
- 3-stage function
- Stop command device
- Pushbuttons
- Coiled connecting cable, 5 m
Description
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Stop command device
Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.
Upper position for rapid access in an emergency
Pushbuttons
Additional functions can be run directly at the enabling switch using the pushbuttons.
Cable
The high-quality connecting cables are available in a coiled version.
Dimensional drawings
Connection examples
Connection examples
Connection examples
Technical data
Approvals
Operating and display elements
Item | Color | Extras | Version | Switching element | Note slide-in label | Slide-in label | Number | Designation1 | LED |
---|---|---|---|---|---|---|---|---|---|
White | Pushbutton | 1 | |||||||
Emergency stop device | 1 |
Electrical connection values
Connecting cable | 23x0.14 mm² (screened) |
rated conditional short-circuit current | 100 A |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 0.5 kV |
Utilization category | |
DC-13 | 24 V 0.3 A (For additional controls) |
DC-13 | 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
Short circuit protection according to IEC 60269-1 | 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.) |
Switching characteristics | 3-stage enabling switch |
Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
Connection type | flying lead |
Number of changeover contacts | 3 (Connection as per block diagram) |
Cable length | |
coiled, short straight piece of cable on the enabling switch | 5 m |
Mechanical life | 1 x 10⁶ |
Switching principle | Snap-action contact element |
Degree of protection | IP54 |
Ambient temperature | -5 ... +60 °C |
Material | PA, CR, TPE (Low PAH) |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
Emergency stop | |
B10D | 0.1 x 10⁶ |
Enabling switch | |
B10D | 0.1 x 10⁶ |
Miscellaneous
in compliance with | 60947-5-8 |
Accessories
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Other Documents
Ordering data
Ordernumber | 105645 |
Item designation | ZSM4204-105645 |
Gross weight | 1,108kg |
Customs tariff number | 85371098 |
ECLASS | 27-37-12-38 Agreement switch |