HomeProductsEnabling switchZSM with numerous control functionsZSM2300-110338

ZSM2300-110338 (Order no. 110338)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

ZSM, LED, + and - buttons, key-operated rotary switch, plug connector RC12

3-stage function
LED indicator
+ and – buttons
Key-operated rotary switch
Coiled connecting cable, 3.5 m
Plug connector

Description

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

+ and – buttons

These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.

Key-operated rotary switch

For individual use, e.g. as an operating mode selector.

Cable

The high-quality connecting cables are available in a coiled version.

Dimensional drawings

Connection examples

Technical data

Approvals

Operating and display elements

Color	Version	Number
	Key-operated rotary switch	1
Yellow	LED	1
	- button	1
	+ button	1

Electrical connection values

Connecting cable	12x0.14 mm² (screened)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Utilization category
DC-13	24 V 0.3 A (For additional controls)
DC-13	30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13	24 V 0.01 A (For additional indicators)
Short circuit protection according to IEC 60269-1	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Connection type	Plug connector number of pins 12
Number of changeover contacts	3 (Connection as per block diagram)
Cable length
coiled	3.5 m
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Degree of protection	IP54
Ambient temperature	-5 ... +60 °C
Material	PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Enabling switch
B_10D	0.1 x 10⁶

Miscellaneous

in compliance with	60947-5-8

in compliance with

60947-5-8

Accessories

Connection material

Blanking plug RC12 for covering the flange connector RC12

073293
RC-12P1N8A8300

Plug connector RC12 for connection to enabling switches, for example

073294
RC-12P1N8A8096

RC12 flange sockets for front wall mounting for connecting for enabling switch

167890
AC-SC-M23F12G-167890

Mounting accessories

Holder for ZSM

102965
HALTER MIT MAGNET ZSM

Magnet mounting

102969
HALTER ZSM

Screw mounting

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 4,1 MB)