HomeProductsEnabling switchZSM with numerous control functionsZSM2304-111595

ZSM2304-111595 (Order no. 111595)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

ZSM, LED, + and - buttons, stop command device, selector switch, plug connector RC17

3-stage function
Stop command device
LED indicator
+ and – buttons
Selector switch
Coiled connecting cable, 5 m
Plug connector

Description

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Stop command device

Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.

Lower position, protected by anti-kink strain relief in case of a fall.

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

+ and – buttons

These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.

Selector switch

The adjustable detent positions can be used as required for axis, speed or range selection, for example.

Cable

The high-quality connecting cables are available in a coiled version.

Dimensional drawings

Connection examples

Technical data

Approvals

Operating and display elements

Color	Version	Number
	+ button	1
Yellow	LED	1
	- button	1
	Emergency stop device	1
	Selector switch 3 positions	1

Electrical connection values

Connecting cable	23x0.14 mm² (screened)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Utilization category
DC-13	24 V 0.01 A (For additional indicators)
DC-13	24 V 0.3 A (For additional controls)
DC-13	30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Short circuit protection according to IEC 60269-1	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Connection type	Plug connector number of pins 17
Number of changeover contacts	3 (Connection as per block diagram)
Cable length
coiled	5 m
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Degree of protection	IP54
Ambient temperature	-5 ... +60 °C
Material	PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Emergency stop
B_10D	0.1 x 10⁶
	Enabling switch
B_10D	0.1 x 10⁶

Miscellaneous

in compliance with	60947-5-8

in compliance with

60947-5-8

Accessories

Connection material

Blanking plug RC17 for covering the flange connector RC17

096159
BLINDSTECKER 17-POL RC-17P1N8A83NN

Flange connector RC17 for front wall mounting for the connection of enabling switches

168392
AC-SC-M23F17G-168392

Mounting accessories

Holder for ZSM

102965
HALTER MIT MAGNET ZSM

Magnet mounting

102969
HALTER ZSM

Screw mounting

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 3,3 MB)