ZSM, + and - buttons, vibration motor, 2 x selector switches, plug connector RC17
- 3-stage function
- Vibration signal
- + and – buttons
- 2x selector switch
- Straight connecting cable, 1.5 m
- Plug connector
Description
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Vibration signal
The vibration signal is used for tactile feedback of the enabling position.
+ and – buttons
These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.
2x selector switch (selector switch 4-stage Gray code / selector switch 12-stage Gray code)
The adjustable detent positions can be used as required for axis, speed or range selection, for example.
Cable
The high-quality connecting cables are available in a straight version.
Dimensional drawings
Connection examples
Connection examples
Connection examples
Technical data
Approvals
Operating and display elements
| Item | Color | Extras | Note slide-in label | Switching element | Slide-in label | Version | Number | Designation1 | LED |
|---|---|---|---|---|---|---|---|---|---|
| Selector switch 4 positions | 1 | ||||||||
| Selector switch 12 positions | 1 | ||||||||
| - button | 1 | ||||||||
| Vibration motor | 1 | ||||||||
| + button | 1 |
Electrical connection values
| Connecting cable | 23x0.14 mm² (screened) |
| rated conditional short-circuit current | 100 A |
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 0.5 kV |
| Utilization category | |
| DC-13 | 24 V 0.3 A (For additional controls) |
| DC-13 | 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| Short circuit protection according to IEC 60269-1 | 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.) |
| Switching characteristics | 3-stage enabling switch |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Connection type | Plug connector number of pins 17 |
| Number of changeover contacts | 3 (Connection as per block diagram) |
| Cable length | |
| straight | 1.5 m |
| Mechanical life | 1 x 10⁶ |
| Switching principle | Snap-action contact element |
| Degree of protection | IP54 |
| Ambient temperature | -5 ... +60 °C |
| Material | PA, CR, TPE (Low PAH) |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Enabling switch | |
| B10D | 0.1 x 10⁶ |
Miscellaneous
| in compliance with | 60947-5-8 |
Accessories
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Doc. no.
Version
Language
Size
EU-Konformitätserklärung
Doc. no.
EDC2109392
Version
Language
Size
0,2 MB
UKCA-Konformitätserklärung
Doc. no.
Version
Language
Size
UKCA-Konformitätserklärung
Doc. no.
EDC20001579
Version
Language
Size
0,1 MB
Instructions
Operating Instructions Enabling Switch ZSM
Doc. no.
Version
Language
Size
Operating Instructions Enabling Switch ZSM
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Doc. no.
2098540
Version
07-12/23
Language
Size
1,2 MB
Betriebsanleitung Zustimmtaster ZSM
Doc. no.
2098540
Version
07-12/23
Language
Size
0,3 MB
Manual de instruções Chave enable ZSM
Doc. no.
2098540
Version
07-12/23
Language
Size
0,3 MB
Istruzioni di impiego Pulsanti di consenso ZSM
Doc. no.
2098540
Version
07-12/23
Language
Size
0,3 MB
Návod k použití Potvrzovací tlačítka ZSM
Doc. no.
2098540
Version
07-12/23
Language
Size
0,5 MB
Instrucțiuni de utilizare Butoane de activare ZSM
Doc. no.
2098540
Version
07-12/23
Language
Size
0,5 MB
Other Documents
Approvals and certificates
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,2 MB
Ordering data
| Ordernumber | 112033 |
| Item designation | ZSM2200-112033 |
| Gross weight | 0,7kg |
| Customs tariff number | 85371098 |
| ECLASS | 27-37-12-38 Agreement switch |
