HomeProductsMultifunctional Gate Box MGBMGB-PNMGB-CB-PN-119111

MGB-CB-PN-119111 (Order no. 119111)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

Control panel MGB-...-PN with 13 control elements, push-pull plug, connection for stack light, RC12

Control panel
Emergency stop according to ISO 13850, illuminated
10 illuminated pushbuttons
including adhesive labels
Push-pull plug
including terminal plug for stack light (M12, 8-pin)
Pre-assembled on mounting plates
Integrated Profinet RT switch

Description

Profinet connection

Connection via push-pull plugs according to IEC 61076-3-117

Profinet RT switch

Point-to-point topology network structure due to integrated RT switch.

Illuminated emergency stop

Emergency stop with illumination that can be controlled as required.

MGB: mounting door on right, without escape release

MGB: mounting door on left, with escape release

MGB: mounting door on left, without escape release

Dimensional drawings

Technical data

Approvals

Operating and display elements

Occupancy diagram
	C1
	B1

Item	Color	Extras	Switching element	Version
10	white		1NO	Illuminated pushbutton
11	white		1NO	Illuminated pushbutton
12	white		1NO	Illuminated pushbutton
13	white		1NO	Illuminated pushbutton
14	white		1NO	Illuminated pushbutton
15	white		1NO	Illuminated pushbutton
16	white		1NO	Illuminated pushbutton
17	white		1NO	Illuminated pushbutton
90	white		1NO	Illuminated pushbutton
93		with adhesive ring	2 PD	Emergency stop illuminated
95	white		1NO	Illuminated pushbutton

Electrical connection values

Connecting cable
Ethernet	Profinet I/O cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Mechanical values and environment

Connection type
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45 (X4 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
	Push-pull power (X1 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
for Stacklight	Plug connector M12 (X6)
	Push-pull power (X2 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45 (X3 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
Installation orientation	any
Switching frequency	0.25 Hz
Response time
Emergency stop / machine stop	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Diagnostic Coverage (DC)	99 %

Diagnostic Coverage (DC)

99 %

	PL	Maximum SIL	PFH_D	Category	Mission time
Evaluating safety signals	PL e	3	4.1x10^-8	4	20 y
Evaluating safety signals	Applies to all additionally included safety functions such as EMERGENCY STOP, enabling switch, etc.

	B10_D	Mission time
Emergency stop	0.13x10⁶	20 y

Miscellaneous

Slide-in label

Number	Labeling	Note
12		without marking

Product version number

V3.30.10

Interface

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet

Accessories

Miscellaneous

Adhesive labels

114529
MGB-A-PLATESET-NN01-114529

Adhesive labels suitable for MGB evaluation modules, bus modules and control modules
silver, blank
Packaging unit = 10 pcs.

Lens set labeled

120377
AY-SET-LNS-SY01-120377

158307
AY-SET-LNS-SY04-158307

Lens set, 5 colors

120344
AY-SET-LNS-0001-120344

Lens set, 6 colors

120378
AY-SET-LNS-0002-120378

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 6,4 MB)