Safety switch TZ, plug connector BHA (MR10), escape release with pushbutton, manual release, special wiring
- Plug connector(s) BHA (MR10)
- Escape release with pushbutton
- manual release
- LED indicator
- Coverlid red
- Actuating head fitted left
- Closed-circuit current principle

Description
Guard locking principle
closed-circuit current (power to unlock): In a safety guard with guard locking according to the closed-circuit current principle, the guard is locked by spring force until the guard locking solenoid is supplied with current. The guard is unlocked by means of magnetic force. This is also referred to as mechanical guard locking.
LED indicator
The LED indicator illuminates red when voltage is applied to the guard locking solenoid. The LED indicator illuminates green when the safety door is closed.
Switching element
SK | 2121 | Slow-action switching contact |
Contacts for door monitoring: 3 positively driven, positively driven contacts | ||
ÜK | 2121 | Slow-action switching contact |
Contacts for guard locking: 4 positively driven, positively driven contacts |
Escape release
This is used for manual release of guard locking from the danger zone without tools.
Required accessories
Actuator is not included in the scope of delivery.





Functional drawings

Dimensional drawings

1 | Order actuator separately |
2 | Direction adjustable |
3 | Safety switch and actuator must be placed together for mounting on the fixture/machines. |
4 | The guard must not be used as a mechanical stop. |
5 | Manual release cannot be sealed |
6 | Escape release: There must not be any tensile force on the actuator when the escape release function is activated |
a | Travel without operation: actuator is in the guide slot, but function is not triggered. |
b | Switching operation completed. Actuator must be inserted to this point to ensure safe switching. The actuator must be withdrawn at least to point a for switching off. |
Connection examples

![]() | Door monitoring |
![]() | Solenoid monitoring |
Connection examples

1 | Plug used: MIN-10MR-1-18... Mencom Corporation www.mencomcorp.com |
2 | Plug connector is not aligned |
Technical data
Approvals




Operating and display elements
LED display | Operating voltage corresponds to the solenoid voltage (2 LEDs; green, red) |
Electrical connection values
Power consumption | 10 W |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 1.5 kV |
Utilization category | |
AC-15 | 4 A 230 V (>70 °C =>2 A) |
DC-13 | 4 A 24 V (>70 °C =>2 A) |
Short circuit protection according to IEC 60269-1 | 4A gG (> 70 °C => 2A gG) |
Solenoid operating voltage | |
AC/DC | 24 V -15% ... +10% |
Solenoid duty cycle | 100 % |
Switching voltage | |
min. at 10 mA | 12 V |
Switching current | |
min. at 24 V | 1 mA |
thermal rated current Ith | 4 A (>70 °C =>2 A) |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | |
Actuating head left | C |
Connection type | |
1 x | Plug connector BHA10 (9-pin + PE; positively driven contact for the door position and positively driven contact for guard lock monitoring connected in series, NC contact for the door position and NC contact for guard lock monitoring connected in series) |
Number of door position positively driven contacts | 4 |
Number of guard lock monitoring positively driven contacts | 4 |
Extraction force | 30 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 35 N |
Lid | Red |
Installation orientation | any |
Insertion depth | 52 mm |
Mechanical life | 1 x 10⁶ |
Retention force | 10 N |
Switching principle | Slow-action switching contact |
Degree of protection | IP65 |
Ambient temperature | -25 ... +80 °C |
Material | |
Contact | Silver alloy, gold flashed |
Housing | Anodized die-cast alloy |
Locking force Fmax | 2000 N |
Locking force FZh | 1500 N |
Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of the guard position | 3x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V | ||
Monitoring of guard locking | 3x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
PL | Maximum SIL | Category | Mission time | |
---|---|---|---|---|
Control of guard locking | Depending on external control of guard locking | 20 y |
Miscellaneous
C number | |
C2399 | with auxiliary release and escape release |
In combination with actuator ACTUATOR-Z-GN
Overtravel | 16 mm |
In combination with actuator ACTUATOR-Z-G
Overtravel | 4 mm |
Accessories

BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator

BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces

BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator

BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator

RIEGEL NZ/TZ-S1
- Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
- Aluminum bolt
- For doors hinged on the right or left.
- Spring catch in open position
- Suitable for a door gap of approx. 15 mm

RIEGEL NZ/TZ-S2
- Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ
- Aluminum bolt
- For doors hinged on the right or left.
- Spring catch in open position
- Suitable for a door gap of approx. 15 mm

RIEGEL TZ-C-NIRO
- Stainless steel bolt
- For doors hinged on the left
- Suitable for a door gap of approx. 15 mm

RIEGEL TZ-C-NIRO-C2101
- Stainless steel bolt
- For doors hinged on the left
- Can be locked in open position with padlocks
- Actuator and switch bracket included
- Bolt for safety switch TZ
- Suitable for a door gap of approx. 15 mm
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents

Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità

Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità


Mode d’emploi Interrupteur de sécurité TZ…
Manual de instrucciones Interruptor de seguridad TZ…
Betriebsanleitung Sicherheitsschalter TZ…








Other Documents



CAD data
Ordering data
Ordernumber | 119367 |
Item designation | TZ1LE024BHA-C2399 |
Gross weight | 1,417kg |
Customs tariff number | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |