HomeProductsPosition switches and multiple limit switchesMultiple limit switch, upright SNSN02X12-732L-MC2432
Series SN... 12 mm, inductive
- Proximity switch spacing 12 mm
- Upright housing, small flange
- Degree of protection IP67 according to IEC 60529
- Plug connector M12, 5-pin
- LED function display
Description
Rated operating distance
With 12 mm proximity switch spacing, the rated operating distance is 5 mm.
LED function display
The switching elements are equipped as standard with a function display (yellow). The function display can be clearly seen from the exterior.
Terminal assignment
Pin | Function | Conductor coloring |
---|---|---|
1 | +24 V VS1 | BN |
2 | Input 2 | WH |
3 | 0 V | BU |
4 | Input 1 | BK |
5 | +24 V VS2 | GY |
PE/FE over thread screen connection
Dimensional drawings
1 | Attention: Built-in connector not aligned |
2 | Yellow LED indicator |
3 | Assured operating distance |
4 | Actuator |
5 | without earth conductor |
6 | Housing without earth conductor! All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent insulation measures. |
Dimensional drawings
1 | Operating distances s/mm |
2 | Dog |
3 | a ON (s) |
4 | a OFF (s) |
5 | Lateral offset a/mm |
Connection examples
1 | UB |
2 | Time |
3 | UB (HIGH) |
4 | UB (LOW) |
5 | T (HIGH) |
6 | T (LOW) |
Connection examples
1 | M12 built-in plug connector |
2 | OV bridge in the switch |
Technical data
Approvals
Workspace
Rated operating distances Sn | 5 mm |
Assured operating distances Sa | 0 ... 4 mm (Dimension applies only to steel (ST37) and to EUCHNER trip dogs of series UX.. / GX..) |
Center offset | |
At s = 4 mm | mON= (-) 0.5 mm and mOFF= 0.0 (For side approach) |
At s = 3 mm | mON= (-) 2.5 mm and mOFF= (-) 2.0 (For side approach) |
At s = 1 mm | mON= (-) 4.2 mm and mOFF= (-) 4.0 (For side approach) |
At s = 2 mm | mON= (-) 3.3 mm and mOFF= (-) 3.0 (For side approach) |
Switching hysteresis | 0.2 ... 1.0 mm (When installed) |
Repeat accuracy R | |
according to EN 60947-5-2 | max. 5 % |
Operating and display elements
LED display | |
LED yellow | LED forward current IFmax. 2.5 mA |
Electrical connection values
Output type | PNP |
Rated operating current Ie | 250 mA |
Operating voltage | |
DC | 20 ... 24 ... 33 V Power supply unit with electrical isolation as per EN 61558-2-6 or sensor pulsing UB(HIGH) |
Operating current | max. 5 mA Current consumption without load |
EMC protection requirements | EN 60947-5-2 |
Utilization category | |
DC-12 | 250mA, 33V (For DC-13, the output must be protected with a free-wheeling diode for inductive loads.) |
Short circuit and overload protection, pulsed | yes |
LOW level | |
on sensor pulsing | 0 ... 5 V DC |
Off-state current Ir | max. 0.001 mA |
Residual ripple | |
From UBor UB(HIGH) | max. 10 % |
Electrical switching frequency | max. 500 Hz |
Safety class | III |
Voltage drop Ud | |
DC | max. 2.5 V |
Duty cycle Ton | |
T (HIGH) : T (LOW) on sensor pulsing | 4 : 1 |
Test pulse duration | |
T (LOW) on sensor pulsing | 0.1 ... 20 ms |
Reverse polarity protection | yes |
Mechanical values and environment
Connection type | |
Connection terminals on the switching element | |
1 x plug connector M12 (5-pin, straight plug connector: cable outlet not adjustable.) | |
Number NC contacts | 2 |
Number of switching elements | 2 |
Design | upright |
Proximity switch spacing | 12 mm |
Switching principle | Normally closed contact |
Degree of protection | IP67 (only screwed tight with the related mating connector.) |
Ambient temperature | -25 ... +70 °C |
Material | |
Housing | Die-cast aluminum |
Active face | PBT |
Miscellaneous
C number | |
C2432 | |
Additional information | Housing without earth conductor! (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent insulation measures.) |
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU declaration of conformity
Doc. no.
Version
Language
Size
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Doc. no.
EDC2539628
Version
Language
Size
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Doc. no.
EDC2539628
Version
Language
Size
0,2 MB
EU-Konformitätserklärung
Doc. no.
Version
Language
Size
EU-Konformitätserklärung
Doc. no.
EDC2077158
Version
Language
Size
0,1 MB
Other Documents
Approvals and certificates
CCC
Doc. no.
Version
Language
Size
CCC
Doc. no.
20001753
Version
Language
Size
0,0 MB
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,3 MB
Sales documents
Position Switches and Multiple Limit Switches
Doc. no.
Version
Language
Size
Position Switches and Multiple Limit Switches
Doc. no.
157836
Version
01-03/18
Language
Size
4,1 MB
Interrupteurs de position et boîtiers multipistes
Doc. no.
157837
Version
01-03/18
Language
Size
4,1 MB
Positionsschalter und Reihengrenztaster
Doc. no.
157835
Version
01-03/18
Language
Size
4,1 MB
Ordering data
Ordernumber | 123939 |
Item designation | SN02X12-732L-MC2432 |
Gross weight | 0,395kg |
European Article Number (EAN) | 4047048007321 |
Customs tariff number | 85365019000 |
ECLASS | 27-27-06-02 Multi-position switch |