HomeProductsEnabling switchZSM with numerous control functionsZSM2300-127990

ZSM2300-127990 (Order no. 127990)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

ZSM, LED, + and - buttons, vibration motor

3-stage function
LED indicator
Vibration signal
+ and – buttons
Coiled connecting cable, 4.5 m

Description

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

+ and – buttons

These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.

Cable

The high-quality connecting cables are available in a coiled version.

Dimensional drawings

1	Cable length extended
2	Cable end sleeves

Connection examples

Technical data

Approvals

Operating and display elements

Color	Version	Number
	- button	1
	+ button	1
Yellow	LED	1
	Vibration motor	1

Electrical connection values

Connecting cable	12x0.14 mm² (screened)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Utilization category
DC-13	24 V 0.01 A (For additional indicators)
DC-13	30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13	24 V 0.3 A (For additional controls)
Short circuit protection according to IEC 60269-1	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Connection type	Flying lead with cable end sleeves
Number of changeover contacts	3 (Connection as per block diagram)
Cable length
coiled	4.5 m
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Degree of protection	IP54
Ambient temperature	-5 ... +60 °C
Material	PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Enabling switch
B_10D	0.1 x 10⁶

Miscellaneous

in compliance with	60947-5-8

in compliance with

60947-5-8

Accessories

Mounting accessories

Holder for ZSM

102965
HALTER MIT MAGNET ZSM

Magnet mounting

102969
HALTER ZSM

Screw mounting

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 3,3 MB)