HomeProductsEnabling switchZSM with numerous control functionsZSM2200-157209

ZSM2200-157209 (Order no. 157209)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

ZSM, pushbuttons, mini joystick

3-stage function
Pushbuttons
Mini joystick

Description

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Pushbuttons

Additional functions can be run directly at the enabling switch using the pushbuttons.

Joystick

Four different operating directions are possible with the mini joystick.

Dimensional drawings

1	Cable length extended
2	Cable end sleeves

Connection examples

Technical data

Approvals

Operating and display elements

Item	Color	Extras	Note slide-in label	Slide-in label	Switching element	Version	Number	Designation1	LED
	black					Pushbutton	1
						Mini joystick	1

Electrical connection values

Connecting cable	12x0.14 mm² (screened)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Utilization category
DC-13	24 V 0.3 A (For additional controls)
DC-13	30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Short circuit protection according to IEC 60269-1	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Connection type	Flying lead with cable end sleeves
Number of changeover contacts	3 (Connection as per block diagram)
Cable length
coiled	5 m
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Degree of protection	IP54
Ambient temperature	-5 ... +60 °C
Material	PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Enabling switch
B_10D	0.1 x 10⁶

Miscellaneous

in compliance with	60947-5-8

in compliance with

60947-5-8

Accessories

Mounting accessories

Holder for ZSM

102965
HALTER MIT MAGNET ZSM

Magnet mounting

102969
HALTER ZSM

Screw mounting

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 3,2 MB)