HomeProductsTransponder-coded safety switches without guard lockingCES-AP safety switchCES-I-AP-U-C14-U20-158632
Non-contact safety switches CES-I-AP-.-C14-…, with cable end sleeves
- Safety switch with integrated evaluation electronics
- Safety switch CES-C04 encapsulated in epoxy resin
- Tested for material resistance in accordance with Ecolab specifications
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 20 m, with cable end sleeves
- Unicode
- Monitoring output OD
Description
Installation position
Permissible installation position
Attention:
The actuating range may vary depending on the substrate material and installation situation.
Typical actuating range
(Only in combination with actuator CES-A-BBN)
For a side approach direction for the actuator and safety switch, a minimum distance of s = 10 mm must be maintained so that the actuating range of the side lobes is not entered.
Unicode evaluation
Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.
Category according to EN 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN 13849-1
Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Terminal assignment
| Designation | Function | Connecting cable conductor coloring |
|---|---|---|
| UB | Power supply, DC 24 V | BN |
| FO1A | Safety output, channel 1 | WH |
| 0 V | Ground, DC 0 V | BU |
| FO1B | Safety output, channel 2 | BK |
| OD | Monitoring output | GY |
Dimensional drawings
| 1 | Active face |
| 2 | LED status indication |
| 3 | Cable end sleeve on cable end |
Connection examples
Technical data
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 75 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 300 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| Current consumption | max. 35 mA (without taking into account the load currents on the monitoring output and the safety outputs) |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OD | |
| Output type | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | 0.8 x UB ... UB V DC |
| Switching current | max. 50 mA |
| Safety outputs FO1A / FO1B | |
| Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U (FO1A) / U (FO1B) | 0 ... 1 V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| HIGH U (FO1A) / U (FO1B) | UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 150 mA |
| Test pulse duration | max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm) |
| Test pulse interval | min. 100 ms |
Mechanical values and environment
| Connection type | Connecting cable PUR, length 20 m |
| Tightening torque | |
| Fixing screws | 2 Nm |
| Ready delay | 10 s |
| Dynamic bending radius | 10 x cable diameter |
| Static bending radius | 5 x cable diameter |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Mounting distance | |
| between switches | min. 80 mm |
| Mounting type | non-flush on metal |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | |
| with UB = 24 V DC | 0 ... +65 °C |
| Material | |
| Housing | 2-component epoxy resin |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | - | 4.1x10-9 | 4 | 20 y |
In combination with actuator CES-A-BBN-C14-160441
| Switch-on distance | |
| Installation position D / in z direction | 15 mm |
| Installation position A / in z direction | 20 mm |
| Secured switch-off distance sar | |
| Installation position D / in x/z direction | max. 60 mm |
| Installation position D / in y direction | max. 68 mm |
| Installation position A / in x/z direction | max. 64 mm |
| Installation position A / in y direction | max. 72 mm |
| Secured switching distance sao | |
| Installation position A / in z direction | min. 10 mm |
| Installation position D / in z direction | min. 5 mm |
Accessories
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Doc. no.
Version
Language
Size
EU-Konformitätserklärung
Doc. no.
EDC2138020
Version
Language
Size
0,2 MB
UKCA-Konformitätserklärung
Doc. no.
Version
Language
Size
UKCA-Konformitätserklärung
Doc. no.
EDC20001471
Version
Language
Size
0,2 MB
Instructions
Operating Instructions Non-Contact Safety Switch
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Doc. no.
Version
Language
Size
Operating Instructions Non-Contact Safety Switch
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2115159
Version
14-05/24
Language
Size
1,8 MB
Mode d’emploi Interrupteur de sécurité sans contact
CES-I-AP-.-C04/C14-… (unicode / multicode)
Doc. no.
2115159
Version
14-05/24
Language
Size
1,8 MB
Manual de instrucciones Interruptor de seguridad sin contacto
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2115159
Version
14-05/24
Language
Size
1,8 MB
Betriebsanleitung Berührungsloser Sicherheitsschalter CES-I-AP-.-C04/C14-… (Uni-/Multicode)
Doc. no.
2115159
Version
14-05/24
Language
Size
1,8 MB
Istruzioni di impiego Finecorsa di sicurezza senza contatto
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2115159
Version
14-05/24
Language
Size
1,8 MB
Návod k použití Bezkontaktní bezpečnostní spínač
CES-I-AP-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2115159
Version
14-05/24
Language
Size
2,2 MB
Other Documents
Approvals and certificates
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,3 MB
Sales documents
Flexibel sicher - Transpondercodierte Sicherheitssysteme CES
Doc. no.
Version
Language
Size
Flexibel sicher - Transpondercodierte Sicherheitssysteme CES
Doc. no.
119922
Version
06-06/22
Language
Size
8,4 MB
Flexibly safe - Transponder-coded safety systems CES
Doc. no.
Version
Language
Size
Flexibly safe - Transponder-coded safety systems CES
Doc. no.
120233
Version
06-06/22
Language
Size
7,3 MB
UQS document
Bescheinigung
Doc. no.
Version
Language
Size
Bescheinigung
Doc. no.
ECO2116783
Version
Language
Size
0,2 MB
Ordering data
| Ordernumber | 158632 |
| Item designation | CES-I-AP-U-C14-U20-158632 |
| Gross weight | 0,8kg |
| Customs tariff number | 85365019000 |
| ECLASS | 27-27-24-03 Safety-related transponder switch |
