MGBS-AP, M12, door hinge on left
- Locking module (order handle module separately)
- Adjustable door hinge; factory setting: left. The door hinge on left option cannot be ordered separately. Order as spare part 159366.
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M12
- Unicode
- Door monitoring output
Description
Door hinge
The door hinge can be changed.
Unicode evaluation
Each handle module is highly coded (unicode). The locking module detects only handle modules that have been taught-in. Additional handle modules can be taught-in. Only the last handle module taught-in is detected.
Guard locking type
MGBS-L1 | Guard locking actuated by spring force and power-ON released (closed-circuit current principle). |
Connector assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IMPB | Operating voltage of guard locking solenoid, 24 V DC | WH |
| 2 | UB | Operating voltage of AP electronics, controls and indicators 24 V DC | BN | |
| 3 | FO1A | Safety output, channel 1 | GN | |
| 4 | FO1B | Safety output, channel 2 | YE | |
| 5 | OI | Diagnostic output | GY | |
| 6 | OD | Door monitoring output | PK | |
| 7 | 0 V UB | Operating voltage of AP electronics, controls and indicators 0 V | BU | |
| 8 | IMM | Guard locking solenoid operating voltage, 0 V | RD |
Dimensional drawings
| 1 | Door hinge left/right |
| 2 | Auxiliary release |
| 3 | LEDs |
Connection examples
Technical data
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | 10 % |
Electrical connection values
| Fuse | |
| external (operating voltage UB) | 0.25 ... 8 A |
| external (solenoid operating voltage IMP) | 0.5 ... 8 A |
| Power consumption | 6 W |
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 0.5 kV |
| Operating voltage DC | |
| UUB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Utilization category | |
| DC-13 | 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| Solenoid operating voltage DC | |
| UIMP | 24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV |
| Solenoid duty cycle | 100 % |
| Switching load | |
| according to UL | 24V DC, Class 2 (alternatively, see operating instructions) |
| Safety class | III |
| Current consumption | |
| IIMP | 400 mA |
| IUB | 40 mA |
| Test pulse duration | max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm) |
| Test pulse interval | min. 100 ms |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OD, OI | |
| Output type | p-switching, short circuit-proof |
| Output voltage | 0.8xUB ... UB V DC |
| Switching current | 1 ... 50 mA |
| Safety outputs FO1A / FO1B | |
| Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| HIGH U(FO1A) / U(FO1B) | UB-1.5 ... UB V DC |
| Discrepancy time | |
| both safety outputs | max. 10 ms Acc. to EN IEC 60947-5-3 |
| Turn-on time | max. 400 ms |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output FO1A / FO1B | 1 ... 150 mA |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Connection type | 1 plug connector M12, 8-pin |
| Extraction force | 20 N |
| Ready delay | max. 1 s |
| Actuating force | 10 N |
| Installation orientation | Door hinge DIN left |
| Switching frequency | max. 0.5 Hz |
| Mechanical life | 1 x 10⁶ |
| Overtravel | 5 mm |
| Retention force | 20 N |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67/IP69/IP69K (screwed tight plug connector/mating component) |
| Ambient temperature | |
| with UB = 24 V DC | -20 ... +55 °C |
| Material | |
| Switch head cover | Die-cast zinc |
| Safety switch housing | Reinforced thermoplastic |
| Switch bracket | Die-cast zinc |
| Locking force Fmax | 3900 N |
| Locking force FZh | 3000 N (Fzh = Fmax/1.3, depending on the actuator used) |
| Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of guard locking | PL e | - | 4.1x10-9 | 4 | 20 y |
| PL | Maximum SIL | Category | Mission time | |
|---|---|---|---|---|
| Control of guard locking | Depending on external control of guard locking | 20 y | ||
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Accessories
Connection material
Function expansion
Wire front release (bowden)
096230
AE-B-A1-02,0-096230
AE-B-A1-02,0-096230
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 2 m (rope length 6 m)
097747
AE-B-A1-02,0-F-097747
AE-B-A1-02,0-F-097747
- Can be used as escape release or emergency release
- automatic return
- Sheath length 2 m (rope length 6 m)
098313
AE-B-A1-03,0-098313
AE-B-A1-03,0-098313
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 3 m (rope length 6 m)
098314
AE-B-A1-04,0-098314
AE-B-A1-04,0-098314
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 4 m (rope length 6 m)
111233
AE-B-A1-03,0-F-111233
AE-B-A1-03,0-F-111233
- Can be used as escape release or emergency release
- automatic return
- Sheath length 3 m (rope length 6 m)
125582
AE-B-A1-06,0-125582
AE-B-A1-06,0-125582
- Can be used as escape release or emergency release
- no automatic return
- Rope length 6 m (without sheath)
124770
AE-B-A1-06,0-F-124770
AE-B-A1-06,0-F-124770
- Can be used as escape release or emergency release
- automatic return
- Rope length 6 m (without sheath)
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Doc. no.
Version
Language
Size
EU-Konformitätserklärung
Doc. no.
EDC2518511
Version
Language
Size
0,2 MB
UKCA-Konformitätserklärung
Doc. no.
Version
Language
Size
UKCA-Konformitätserklärung
Doc. no.
EDC20001509
Version
Language
Size
0,1 MB
Instructions
Operating Instructions MGBS-P-L.-AP… Unicode/Multicode
Doc. no.
Version
Language
Size
Operating Instructions MGBS-P-L.-AP… Unicode/Multicode
Doc. no.
2527245
Version
06/23
Language
Size
4,3 MB
Mode d’emploi MGBS-P-L.-AP… Uni-/multicode
Doc. no.
2527245
Version
06/23
Language
Size
4,3 MB
Manual de instrucciones MGBS-P-L.-AP… Unicode/Multicode
Doc. no.
2527245
Version
06/23
Language
Size
4,3 MB
Betriebsanleitung MGBS-P-L.-AP… Uni-/Multicode
Doc. no.
2527245
Version
06/23
Language
Size
4,3 MB
Istruzioni di impiego MGBS-P-L.-AP… Unicode/Multicode
Doc. no.
2527245
Version
06/23
Language
Size
4,3 MB
操作説明書 MGBS-P‑L.‑AP… ユニコード/マルチコード
Doc. no.
2527245
Version
06/23
Language
Size
4,8 MB
Other Documents
Approvals and certificates
FCC
Doc. no.
Version
Language
Size
FCC
Doc. no.
Version
Language
Size
0,1 MB
IC
Doc. no.
Version
Language
Size
IC
Doc. no.
Version
Language
Size
1,8 MB
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,3 MB
UQS document
Bescheinigung
Doc. no.
Version
Language
Size
Bescheinigung
Doc. no.
ECO2123565
Version
Language
Size
0,2 MB
Ordering data
| Ordernumber | 161550 |
| Item designation | MGBS-P-L1-AP-U-L-AZ-SA-161550 |
| Gross weight | 2,021kg |
| Customs tariff number | 85365019000 |
| ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |
Technical support
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.
EUCHNER (UK) Ltd.
+44 114 2560123
sales(at)euchner.co.uk
EUCHNER USA Inc.
+1 315 701-0315
info(at)euchner-usa.com