CES-IA-BP-M-C07-SI-167007 (Order no. 167007)

Choose content Description Choose content Technical data Components Accessories Choose content Ordering data

Complete set comprising non-contact safety switch CES-C07, with actuator

Safety switch with integrated evaluation electronics
Actuator included
Suitable for separate operation (no series connection)
Multicode
M12 plug connector, 5-pin (pin 5 not used)
Direct connection to IP67 field modules
2 safety outputs (semiconductor outputs)
Short circuit monitoring
Category 4 / PL e according to EN ISO 13849-1
Three active faces

CES-IA-BP-M-C07-SI-167007 (Order no. 167007)

Description

Installation position

Permissible installation position

Multicode evaluation

Every suitable actuator is detected by the switch.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

Category 4/PL e according to EN 13849-1

Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Terminal assignment

Pin	Designation	Function
1	UB	Power supply, DC 24 V
2	FO1A	Safety output, channel A
3	0 V	Ground, DC 0 V
4	FO1B	Safety output, channel B
5	-	n.c.

Notice

The caps for the mounting holes are included.

CES-C07: Transponder-coded safety switch

Dimensional drawings

1	LEDs
2	Active face
3	With the installation orientation shown: cable outlet on left or right

Connection examples

Technical data

Approvals

TUEV Süd München_Z10 040393 0031 Rev. 02

Switch CES-I-BP-M-C07-SI-162813 (Order no. 162813)

Workspace

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection values

Fuse
external (operating voltage)	0.25 ... 8 A
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	1.5 kV
Operating voltage DC
U_B	24 V DC -15% ... +15% regulated, residual ripple<5%, PELV
Turn-on time
Safety outputs	max. 100 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 125 ms
Safety class	III
Current consumption	40 mA
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD/C
Output type	p-switching, short circuit-proof
Output voltage	UB-1.5 ... UB V DC
Switching current	1 ... 50 mA
	Safety outputs FO1A / FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
HIGH U(FO1A) / U(FO1B)	UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
Discrepancy time	max. 10 ms
Utilization category
DC-13	24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current Ir	max. 0.25 mA
Switching current	1 ... 150 mA
Test pulse duration	0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm)
Test pulse interval	ca 100 ms

Mechanical values and environment

Dimensions	40 x 26.5 x 18
Connection type	M12 plug connector, 5-pin
Tightening torque	max. 0.8 Nm
Ready delay	1.3 s
Operating altitude	max. 4 000 m
Installation orientation	any
Switching frequency	max. 1 Hz
Mounting distance
between switches	min. 50 mm
Mounting type	non-flush on metal
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature
with U_B = 24 V DC	-25 ... +55 °C (+65 °C at I_L = max. 10 mA per safety output)
Material
Housing	Plastic, PBT-PC-GF30

Miscellaneous

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures
Additional feature	Caps included

Actuator CES-A-BTN-C07-156230 (Order no. 156230)

Electrical connection values

Power supply	Inductive via read head

Power supply

Inductive via read head

Mechanical values and environment

Dimensions	40 x 26.5 x 18
Tightening torque
Fixing screws	max. 0.8 Nm
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature	-40 ... +65 °C
Material
Housing	Plastic PBT-PC-GF30

Components included in the set

Included accessories	2x safety screws M4x20

Included accessories

2x safety screws M4x20

Components

162813
CES-I-BP-M-C07-SI-162813
Non-contact safety switches CES-I-BP-.-C07, M12

Safety switch with integrated evaluation electronics
Suitable for separate operation (no series connection)
Multicode
M12 plug connector, 5-pin (pin 5 not used)
Direct connection to IP67 field modules
2 safety outputs (semiconductor outputs)
Short circuit monitoring
Category 4 / PL e according to EN ISO 13849-1
Three active faces

156230
CES-A-BTN-C07-156230
Actuator CES-A-BTN-C07

Cube-shaped design, 40 x 26.5 x 18 mm
2x safety screws M4x20 included

Accessories

Metal bolt

Bolt for safety switch CES-C07

168155
BTM-CES07-S-TH-20-X-168155

Bolt for switch CES-C07
Steel bolt
For doors hinged on the left or right
Ball detent mechanism in closed position
Suitable for door gap of approx. 7 mm
Protective plate for safety switch

Bolt with escape release, for safety switch CES-C07

168189
BTM-CES07-S-TH-21-F-168189

Bolt for switch CES-C07
Steel bolt
For doors hinged on the left or right
Bolt with escape lever
With detent knob in open position
Ball detent mechanism in closed position
Suitable for a door gap of approx. 7 mm
Protective plate for safety switch

Downloads

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download Complete Package (ZIP, 4,1 MB)