Safety switch CET-AR
Benefits for you
- Safety switch with guard locking and safe guard lock monitoring
- Integrated CES-AR electronics
- A special evaluation unit is not required
- Possible to connect up to 20 devices (CES-AR, CET-AR, MGB-AR,…) in series in an AR chain
- Safety category 4 and PL e according to EN ISO 13849-1 in any installation orientation, head downward/upward/horizontal
- Two safe semiconductor outputs and monitoring output OUT
- Safety outputs with pulsing
- Input (optional) for the connection of feedback loop and start button
Design and functionality
The CET-AR forms a complete safety solution (PL e according to EN ISO 13849-1). Depending on the version a start button and feedback loop can be connected. As a result the CET-AR includes everything that is necessary to secure a guard. It could not be easier!Connection to safe control systems or safety relays
Do not use a control system or safety relay with pulsing for monitoring short circuits or switch off the pulsing function in these devices. The switch generates its own clock signals on the output lines OA/OB. A downstream device must tolerate these test pulses, which may have a length of up to 1 ms.The inputs on the downstream device must be suitable for positive-switching devices (pnp outputs), as the two outputs on the safety switch deliver a level of +24 V in the switched-on state.
OUT output
The semiconductor output OUT is switched if the guard is closed (actuator in the actuating range). It is not allowed to be used for safety functions. The OUT outputs on the individual switches can, however, not be polled if connected in series using a Y-distributor. Evaluation is possible only on parallel wiring to the control cabinet.RST input
The switches in a chain in a fault state can be reset using the RST input. To do this, a voltage of 24 V is applied to the RST input for at least 3 seconds. It is not necessary to disconnect the power supply to reset a fault.Use as individual switch or switch chain
The safety switch CET-AR can be operated as a compact individual switch or in a switch chain with max. 20 devices.If a single CET-AR is used, connect the device as shown in the figure above. The OUT output can also be connected here to a control system as a monitoring output.
The switches are connected in series using plug connectors and Y-distributors. The first switch in the chain must always be fitted with a bridging plug.
If a safety door is opened or if a fault occurs on one of the switches, the system shuts down the machine. A higher-level control system can, however, not detect which safety door is open or on which switch a fault has occurred. A special AR evaluation unit is required.
Product finder
Quick search
Escape release
Ramp
Connection
Products (49)
No results found
106275
CET1-AR-CDA-AH-50X-SG-106275
Non-contact safety switch CET-AR-..., M12, with double ramp
CET1-AR-CDA-AH-50X-SG-106275
Non-contact safety switch CET-AR-..., M12, with double ramp
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- With double ramp
- Approach directions A and C (delivery state)
109231
CET1-AR-CDA-CH-50X-SG-109231
Non-contact safety switch CET-AR-..., M12, with double ramp
CET1-AR-CDA-CH-50X-SG-109231
Non-contact safety switch CET-AR-..., M12, with double ramp
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- With double ramp
- Approach directions A and C (delivery state)
113255
CET1-AR-CDA-CH-50X-SH-113255
Non-contact safety switch CET-AR-..., RC18, and double ramp
CET1-AR-CDA-CH-50X-SH-113255
Non-contact safety switch CET-AR-..., RC18, and double ramp
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- With double ramp
- Approach directions A and C (delivery state)
106616
CET1-AR-CRA-AH-50A-SG-106616
Non-contact safety switch CET-AR-..., M12, with escape release
CET1-AR-CRA-AH-50A-SG-106616
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Feedback loop
- Escape release, 75 mm long
- Approach direction A (delivery state)
106159
CET1-AR-CRA-AH-50F-SG-106159
Non-contact safety switch CET-AR-..., M12, with escape release
CET1-AR-CRA-AH-50F-SG-106159
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
110943
CET1-AR-CRA-AH-50F-SH-C2312-110943
Non-contact safety switch CET-AR-..., RC18, with escape release
CET1-AR-CRA-AH-50F-SH-C2312-110943
Non-contact safety switch CET-AR-..., RC18, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Teach-in input
- Escape release, 105 mm long
- Approach direction A (delivery state)
105802
CET1-AR-CRA-AH-50S-SG-105802
Non-contact safety switch CET-AR-..., M12
CET1-AR-CRA-AH-50S-SG-105802
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Feedback loop
- Approach direction A (delivery state)
103418
CET1-AR-CRA-AH-50X-SG-103418
Non-contact safety switch CET-AR-..., M12
CET1-AR-CRA-AH-50X-SG-103418
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- Approach direction A (delivery state)
110203
CET1-AR-CRA-AH-50X-SH-110203
Non-contact safety switch CET-AR-..., RC18
CET1-AR-CRA-AH-50X-SH-110203
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Teach-in input
- Approach direction A (delivery state)
113022
CET1-AR-CRA-AH-50X-SH-C2290-113022
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden)
CET1-AR-CRA-AH-50X-SH-C2290-113022
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Teach-in input
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
110241
CET1-AR-CRA-CH-50F-SG-110241
Non-contact safety switch CET-AR-..., M12, with escape release
CET1-AR-CRA-CH-50F-SG-110241
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Escape release, 75 mm long
- Approach direction A (delivery state)
124104
CET1-AR-CRA-CH-50F-SH-C2312-124104
Non-contact safety switch CET-AR-..., RC18
CET1-AR-CRA-CH-50F-SH-C2312-124104
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Escape release, 105 long
- Approach direction A (delivery state)
105764
CET1-AR-CRA-CH-50S-SG-105764
Non-contact safety switch CET-AR-..., M12
CET1-AR-CRA-CH-50S-SG-105764
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Feedback loop
- Approach direction A (delivery state)
105763
CET1-AR-CRA-CH-50X-SG-105763
Non-contact safety switch CET-AR-..., M12
CET1-AR-CRA-CH-50X-SG-105763
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Approach direction A (delivery state)
109015
CET1-AR-CRA-CH-50X-SG-C2290-109015
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
CET1-AR-CRA-CH-50X-SG-C2290-109015
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
110204
CET1-AR-CRA-CH-50X-SH-110204
Non-contact safety switch CET-AR-..., RC18
CET1-AR-CRA-CH-50X-SH-110204
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector MR23 (RC18)
- Multicode
- Approach direction A (delivery state)
109075
CET2-AR-CRA-AH-50S-SG-109075
Non-contact safety switch CET-AR-..., M12
CET2-AR-CRA-AH-50S-SG-109075
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Feedback loop
- Approach direction A (delivery state)
110240
CET2-AR-CRA-AH-50X-SG-110240
Non-contact safety switch CET-AR-..., M12
CET2-AR-CRA-AH-50X-SG-110240
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- Approach direction A (delivery state)
110205
CET2-AR-CRA-AH-50X-SH-110205
Non-contact safety switch CET-AR-..., RC18
CET2-AR-CRA-AH-50X-SH-110205
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Teach-in input
- Approach direction A (delivery state)
109941
CET2-AR-CRA-CH-50F-SG-C2312-109941
Non-contact safety switch CET-AR-..., M12, with escape release
CET2-AR-CRA-CH-50F-SG-C2312-109941
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Escape release, 105 mm long
- Approach direction A (delivery state)
110082
CET2-AR-CRA-CH-50X-SG-110082
Non-contact safety switch CET-AR-..., M12
CET2-AR-CRA-CH-50X-SG-110082
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Approach direction A (delivery state)
110206
CET2-AR-CRA-CH-50X-SH-110206
Non-contact safety switch CET-AR-..., RC18
CET2-AR-CRA-CH-50X-SH-110206
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Approach direction A (delivery state)
114090
CET3-AR-CDA-CH-50X-SG-114090
Non-contact safety switch CET-AR-..., M12, with double ramp
CET3-AR-CDA-CH-50X-SG-114090
Non-contact safety switch CET-AR-..., M12, with double ramp
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- With double ramp
- Approach directions A and C (delivery state)
113965
CET3-AR-CRA-AH-50F-SG-113965
Non-contact safety switch CET-AR-..., M12, with escape release
CET3-AR-CRA-AH-50F-SG-113965
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
113148
CET3-AR-CRA-AH-50F-SH-113148
Non-contact safety switch CET-AR-..., RC18, with escape release
CET3-AR-CRA-AH-50F-SH-113148
Non-contact safety switch CET-AR-..., RC18, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
111725
CET3-AR-CRA-AH-50F-SH-C2312-111725
Non-contact safety switch CET-AR-..., RC18, with escape release
CET3-AR-CRA-AH-50F-SH-C2312-111725
Non-contact safety switch CET-AR-..., RC18, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Escape release, 105 mm long
- Approach direction A (delivery state)
113023
CET3-AR-CRA-AH-50F-SH-C2353-113023
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden) and escape release
CET3-AR-CRA-AH-50F-SH-C2353-113023
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden) and escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- With wire front release (bowden), 3 m, automatic return
- With escape release, 105 mm long
- Approach direction A (delivery state)
109401
CET3-AR-CRA-AH-50X-SG-109401
Non-contact safety switch CET-AR-..., M12
CET3-AR-CRA-AH-50X-SG-109401
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Approach direction A (delivery state)
113139
CET3-AR-CRA-AH-50X-SG-C2290-113139
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
CET3-AR-CRA-AH-50X-SG-C2290-113139
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
110103
CET3-AR-CRA-AH-50X-SH-110103
Non-contact safety switch CET-AR-..., RC18
CET3-AR-CRA-AH-50X-SH-110103
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Approach direction A (delivery state)
113024
CET3-AR-CRA-AH-50X-SH-C2290-113024
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden)
CET3-AR-CRA-AH-50X-SH-C2290-113024
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
114088
CET3-AR-CRA-AH-50X-SH-C2290-114088
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden) (5 m)
CET3-AR-CRA-AH-50X-SH-C2290-114088
Non-contact safety switch CET-AR-..., RC18, with wire front release (bowden) (5 m)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Wire front release (bowden), 5 m, automatic return
- Approach direction A (delivery state)
115202
CET3-AR-CRA-AH-50X-SH-C2375-115202
Non-contact safety switch CET-AR-..., RC18
CET3-AR-CRA-AH-50X-SH-C2375-115202
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Approach direction A (delivery state)
110907
CET3-AR-CRA-CH-50F-SG-110907
Non-contact safety switch CET-AR-..., M12, with escape release
CET3-AR-CRA-CH-50F-SG-110907
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Escape release, 75 mm long
- Approach direction A (delivery state)
112992
CET3-AR-CRA-CH-50S-SG-112992
Non-contact safety switch CET-AR-..., M12
CET3-AR-CRA-CH-50S-SG-112992
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Feedback loop / start button
- Approach direction A (delivery state)
110906
CET3-AR-CRA-CH-50X-SG-110906
Non-contact safety switch CET-AR-..., M12
CET3-AR-CRA-CH-50X-SG-110906
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
110114
CET3-AR-CRA-CH-50X-SG-C2290-110114
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
CET3-AR-CRA-CH-50X-SG-C2290-110114
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
110104
CET3-AR-CRA-CH-50X-SH-110104
Non-contact safety switch CET-AR-..., RC18
CET3-AR-CRA-CH-50X-SH-110104
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Door monitoring output
- Approach direction A (delivery state)
114712
CET4-AR-CDA-CH-50X-SG-114712
Non-contact safety switch CET-AR-..., M12, with double ramp
CET4-AR-CDA-CH-50X-SG-114712
Non-contact safety switch CET-AR-..., M12, with double ramp
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- With double ramp
- Approach directions A and C (delivery state)
116285
CET4-AR-CRA-AH-50F-SH-116285
Non-contact safety switch CET-AR-..., RC18, with escape release
CET4-AR-CRA-AH-50F-SH-116285
Non-contact safety switch CET-AR-..., RC18, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
111683
CET4-AR-CRA-AH-50X-SG-111683
Non-contact safety switch CET-AR-..., M12
CET4-AR-CRA-AH-50X-SG-111683
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Approach direction A (delivery state)
128193
CET4-AR-CRA-AH-50X-SG-C2290-128193
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
CET4-AR-CRA-AH-50X-SG-C2290-128193
Non-contact safety switch CET-AR-..., M12, with wire front release (bowden) (3 m)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Wire front release (bowden), 3 m
- Approach direction A (delivery state)
162555
CET4-AR-CRA-AH-50X-SG-C2355-162555
Non-contact safety switch CET-AR-..., M12
CET4-AR-CRA-AH-50X-SG-C2355-162555
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
110201
CET4-AR-CRA-AH-50X-SH-110201
Non-contact safety switch CET-AR-..., RC18
CET4-AR-CRA-AH-50X-SH-110201
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Approach direction A (delivery state)
114650
CET4-AR-CRA-CH-50F-SG-114650
Non-contact safety switch CET-AR-..., M12, with escape release
CET4-AR-CRA-CH-50F-SG-114650
Non-contact safety switch CET-AR-..., M12, with escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Escape release, 75 mm long
- Approach direction A (delivery state)
113081
CET4-AR-CRA-CH-50S-SG-113081
Non-contact safety switch CET-AR-..., M12
CET4-AR-CRA-CH-50S-SG-113081
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Feedback loop / start button
- Approach direction A (delivery state)
111684
CET4-AR-CRA-CH-50X-SG-111684
Non-contact safety switch CET-AR-..., M12
CET4-AR-CRA-CH-50X-SG-111684
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
113609
CET4-AR-CRA-CH-50X-SG-C2355-113609
Non-contact safety switch CET-AR-..., M12
CET4-AR-CRA-CH-50X-SG-C2355-113609
Non-contact safety switch CET-AR-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
110202
CET4-AR-CRA-CH-50X-SH-110202
Non-contact safety switch CET-AR-..., RC18
CET4-AR-CRA-CH-50X-SH-110202
Non-contact safety switch CET-AR-..., RC18
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Door monitoring output
- Approach direction A (delivery state)