Non-contact safety switch CMS-R-AZA-01PL-AS1, with connecting cable and plug connector M12
- Safety switches with integrated read head and integrated evaluation unit.
- LED diagnostic displays
- Operating distance 9 mm
Description
Actuator
An appropriate actuator to suit the read head selected is required. The dimensions of the actuators are the same as those of the read heads, although the former have no connecting cable.
AS-Interface inputs
D0 - D3 | Switch actuated/open |
Evaluation is performed via a safety monitor.
AS-Interface output
D1 | LED 1 on read head (only CMS-R-AZA...) |
LED function display
- The ASI LED (dual LED red/green) displays the colors red, green and yellow. The status of the switch and the bus is indicated via this LED.
- LED 1 can be connected via the AS-Interface bus, e.g. to indicate the door state.
Principle of operation
Reed contacts are installed in the read head of the safety system CMS. The contacts blades on the reed contacts will close when under the influence of the magnetic field from the actuator. The read head only responds to the specific mating component, that is a specific actuator that is allocated to the read head type.
Dimensional drawings
Connection examples
View of connection side |
Technical data
Approvals
Workspace
Operating distance on | min. 9 mm |
Secured switch-off distance sar | max. 70 mm |
Center offset | |
symmetrical, at distance s = 3 mm | 2.5 mm |
Electrical connection values
ASI data out | D1 = LED red |
ASI operating current | max. 30 mA |
ASI data in | |
according to AS-i Safety at Work | D0, D1, D2, D3 (Switch actuated = code sequence / switch not actuated = zero sequence) |
AS-Interface LED | |
green | Power |
red | Fault |
AS-Interface slave type | ID-Code: B, EA-Code: 7 |
ASI voltage | |
DC | 26.5 ... 30 ... 31.6 V |
Mechanical values and environment
Connection type | hard-wired encapsulated cable with plug connector M12 |
Design | A |
Installation orientation | any |
Cable length | 1 m |
Mechanical life | 100 x 10⁶ |
Response time | |
after change in the actuation status | max. 5 ms |
Degree of protection | IP67 |
Ambient temperature | -20 ... +60 °C |
Material | |
Cable material | PUR |
Housing | Reinforced thermoplastic (PPS), fully encapsulated |
Method of operation | magnetic, reed contact |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
Mission time | 20 y |
Monitoring of the guard position | |
B10D | 3 x 10⁶ |
Category | 3 |
Performance Level | PL e |
PFHD | 4.29 x 10-8 |
Miscellaneous
in compliance with | EN 60947-5-3: 2013; EN ISO 13849-1: 2008; EN ISO 14119: 2013; EN 62026-2: 2013 (AS-i) |
Accessories
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Mode d’emploi Interrupteur de sécurité CMS-AS1
Manual de instrucciones Interruptor de seguridad CMS-AS1
Betriebsanleitung Sicherheitsschalter CMS-AS1
Other Documents
Ordering data
Ordernumber | 105090 |
Item designation | CMS-R-AZA-01PL-AS1 |
Gross weight | 0,096kg |
Customs tariff number | 85389099990 |
ECLASS | 27-27-24-02 Safety-related magnetic proximity switch |