HomeProductsSafety engineering with AS‑InterfaceTransponder-coded safety switches with AS-InterfaceCET3-AS-CRA-AB-50X-1-C2290-165486
Safety switch CET-AS – with AS-i connection, closed-circuit current principle, with wire front release (bowden) 4 m
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Category 4 / PL e according to EN ISO 13849-1
- Unicode
- Wire front release (bowden), automatic return, rope length 4 m
- Approach direction A (delivery state)
Description
Approach direction
Horizontal
Can be adjusted in 90° steps
Guard locking type
CET3 | Closed-circuit current principle, guard locking by spring force. Release by control of AS-i output 0. |
Control of the guard locking solenoid
The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0.
AS-Interface inputs
D0, D1 | Door monitoring |
D2, D3 | Guard lock monitoring |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D0 | Guard locking |
D1 | LED red |
D2 | LED green |
LED function display
- The ASI LED indicates the operating voltage on the bus.
- The State LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Wire front release (bowden)
The wire front release permits remote unlocking of the guard locking via a pull wire. Flexible routing of the pull wire permits release of the guard locking in inaccessible installation situations.
Important: The wire front release (bowden) is not a safety function.
Dimensional drawings
Connection examples
| View of plug side |
Connection examples
Technical data
Approvals
Electrical connection values
| ASI address | 0 |
| ASI operating current | 50 mA |
| ASI data in | |
| according to AS-i Safety at Work | D3 (Guard locking) |
| according to AS-i Safety at Work | D2 (Guard locking) |
| according to AS-i Safety at Work | D0 (Door position) |
| according to AS-i Safety at Work | D1 (Door position) |
| ASI data out | |
| LED green | D2 (1 = LED on) |
| Guard locking solenoid | D0 (1 = Solenoid energized) |
| LED red | D1 (1 = LED on) |
| AS-Interface auxiliary voltage | |
| IEC 60742, PELV | 24 V -15% ... +10% |
| Auxiliary current AS-Interface | 480 mA |
| AS-Interface LED | |
| green | Power |
| red | Fault |
| AS-Interface protocol | ASi-3 |
| AS-Interface slave type | ID-Code: B, EA-Code: 7 |
| ASI voltage | 22.5 ... 30 ... 31.6 V |
| Safety class | III |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Connection type | |
| 1 x | Plug connector M12 (4-pin) |
| Installation orientation | any |
| Switching frequency | max. 0.5 Hz |
| Degree of freedom X | ±5 mm |
| Degree of freedom Y | ±5 mm |
| Degree of freedom Z | ±4 mm |
| Mechanical life | 2 x 10⁶ |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67 (screwed tight plug connector/mating component) |
| Ambient temperature | |
| with UB = 24 V DC | -20 ... +55 °C |
| Material | |
| Safety switch housing | Die-cast aluminum |
| Ramp | Stainless steel |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N (FZH = FMAX/1.3) |
| Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Mission time | 20 y |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Control of guard locking | PL b | - | 4.23x10-6 | b | 20 y |
| Monitoring of guard locking | PL e | - | 3.1x10-9 | 4 | 20 y |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Accessories
Function expansion
Mounting accessories
Efficient protection against tampering for safety switch mounting
161344
AM-C-SW4-V3-161344
AM-C-SW4-V3-161344
- Plastic inserts for hexagon socket screws a/f 4
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
161348
AM-C-SW5-V3-161348
AM-C-SW5-V3-161348
- Plastic inserts for hexagon socket screws a/f 5
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Doc. no.
Version
Language
Size
EU-Konformitätserklärung
Doc. no.
EDC2110802
Version
Language
Size
0,2 MB
UKCA-Konformitätserklärung
Doc. no.
Version
Language
Size
UKCA-Konformitätserklärung
Doc. no.
EDC20001474
Version
Language
Size
0,1 MB
Instructions
Operating Instructions Transponder-Coded Safety Switch With Guard Locking CET.-AS-… (Unicode/Multicode)
Doc. no.
Version
Language
Size
Operating Instructions Transponder-Coded Safety Switch With Guard Locking CET.-AS-… (Unicode/Multicode)
Doc. no.
2113689
Version
05-05/20
Language
Size
1,6 MB
Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung CET.-AS-… (Uni-/Multicode)
Doc. no.
2113689
Version
05-05/20
Language
Size
1,6 MB
Other Documents
Approvals and certificates
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,3 MB
UQS document
Bescheinigung
Doc. no.
Version
Language
Size
Bescheinigung
Doc. no.
ECO2113400
Version
Language
Size
0,2 MB
Ordering data
| Ordernumber | 165486 |
| Item designation | CET3-AS-CRA-AB-50X-1-C2290-165486 |
| Gross weight | 1,8kg |
| Customs tariff number | 85365019 |
| ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |
