HomeProductsTransponder-coded key systems EKS and CKSElectronic-Key-System EKS2Electronic-Key-System EKS2, evaluation unitEKS2-E-PN-M-H1-170904
Evaluation unit EKS2
- Evaluation unit of the Electronic-Key-System EKS2
- Suitable for selection of operation mode with safety level PL e
- 1-out-of-n safety outputs
- PROFINET connection with integrated RT switch
- Connection for reader unit
- Mounting; assembly in the panel or control cabinet
- LED indicator
Description
PROFINET for easy integration into the network
The dates are transmitted to the control system via PROFINET. With the integrated PROFINET RT switch, the EKS2 evaluation unit can be easily integrated into the existing control environment.
1-out-of-n safety outputs for the highest safety level PL e
The 1-out-of-n safety outputs are connected directly to a safe control system and evaluated there. This enables the selection of operation mode at the highest safety level PL e.
The device has its own short circuit monitoring.
mounting; assembly
The evaluation unit can be installed either in the panel or in the control cabinet. An optional top-hat rail adapter is available for mounting; assembly in the control cabinet.
Accessories included in the scope of delivery
- Screw terminal, plug-in
Required accessories (not included in the scope of delivery)
- Mounting screws
- Connection cable, connecting cable for connecting the reader unit to the evaluation unit
Dimensional drawings
Connection examples
Technical data
Electrical connection values
| Connection cross section | |
| X1 (8-pin screw terminals) | 0.05 ... 1.5 mm² |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +20% regulated, residual ripple < 5%, PELV |
| EMC protection requirements | EN 61000-6-2, EN 61000-6-4 |
| Current consumption | |
| without load | max. 150 mA |
| Safety outputs FO1X | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1X) | 0 ... 1 V DC |
| HIGH U(FO1X) | UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| Utilization category | |
| DC-13 | DC-13 24V 50mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 50 mA |
Mechanical values and environment
| Connection type | |
| according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e | RJ45 (XF2 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).) |
| according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e | RJ45 (XF1 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).) |
| Cable length | max. 100 m |
| Mounting type | Screws (Alternatively pluggable with additional top-hat rail adapter) |
| Degree of protection | IP20 |
| Ambient temperature | -20 ... +55 °C |
| Material | |
| Housing | PA66 GF40 |
| Reader unit interface | |
| Connection type | Male plug |
| Cable length | max. 50 m |
| Number of pins | 5 |
| Insertion cycles | 10 |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Safe switching and monitoring of the selected operating mode | PL e | 3 | 6.44x10-9 | 3 | 20 y |
Miscellaneous
| Component | Operation only with UL Class 2 power supply or equivalent measures |
Interface
| Bus data protocol | PROFINET |
| Data rate | 10/100 Mbit/s |
| Date interface | Ethernet (IEEE 802.3) |
Accessories
Connection material
Connection cable, connecting cable for connecting the reader unit to the EKS2 evaluation unit
173577
C-RJ9-04x015PU0,50-RJ9-173577
C-RJ9-04x015PU0,50-RJ9-173577
- RJ9 plug
- PUR cable
- Suitable for drag chain
- Cable lengths 0.5 m
173580
C-RJ9-04x015PU10,0-RJ9-173580
C-RJ9-04x015PU10,0-RJ9-173580
- RJ9 plug
- PUR cable
- Suitable for drag chain
- Cable length 10 m
173579
C-RJ9-04x015PU05,0-RJ9-173579
C-RJ9-04x015PU05,0-RJ9-173579
- RJ9 plug
- PUR cable
- Suitable for drag chain
- Cable length 5 m
173578
C-RJ9-04x015PU02,0-RJ9-173578
C-RJ9-04x015PU02,0-RJ9-173578
- RJ9 plug
- PUR cable
- Suitable for drag chain
- Cable length 2 m
173582
C-RJ9-04x015PU15,0-RJ9-173582
C-RJ9-04x015PU15,0-RJ9-173582
- RJ9 plug
- PUR cable
- Suitable for drag chain
- Cable length 15 m
173583
C-RJ9-04x015PU20,0-RJ9-173583
C-RJ9-04x015PU20,0-RJ9-173583
- RJ9 plug
- PUR cable
- Suitable for drag chain
- Cable length 20 m
Electronic-Key
Key EKS2
168432
EKS2-K-K-B-D2-RD-168432
EKS2-K-K-B-D2-RD-168432
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color red
168437
EKS2-K-K-B-D2-WH-168437
EKS2-K-K-B-D2-WH-168437
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color white
168434
EKS2-K-K-B-D2-BU-168434
EKS2-K-K-B-D2-BU-168434
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color blue
168438
EKS2-K-K-B-D2-OG-168438
EKS2-K-K-B-D2-OG-168438
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color orange
168435
EKS2-K-K-B-D2-GN-168435
EKS2-K-K-B-D2-GN-168435
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color green
168436
EKS2-K-K-B-D2-YE-168436
EKS2-K-K-B-D2-YE-168436
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color yellow
168433
EKS2-K-K-B-D2-BK-168433
EKS2-K-K-B-D2-BK-168433
- Key for the Electronic-Key-System EKS2
- Security through MIFARE DESfire® transponders with AES encryption
- Color black
Reader unit EKS2
Reader unit EKS2 with holding clip
170915
EKS2-R-I1A1-B1-170915
EKS2-R-I1A1-B1-170915
- Reader unit of the Electronic-Key-System EKS2
- Suitable for installation in standard mounting hole Ø 22.5 mm
- Degree of protection IP65/IP67/IP69/IP69K
- LED indicator
- With holding clip for the key
- Bottom cable outlet
173728
EKS2-R-I1A3-B1-173728
EKS2-R-I1A3-B1-173728
- Reader unit of the Electronic-Key-System EKS2
- Suitable for installation in standard mounting hole Ø 22.5 mm
- Degree of protection IP65/IP67/IP69/IP69K
- LED indicator
- With holding clip for the key
- Top cable outlet
173727
EKS2-R-I1A2-B1-173727
EKS2-R-I1A2-B1-173727
- Reader unit of the Electronic-Key-System EKS2
- Suitable for installation in standard mounting hole Ø 22.5 mm
- Degree of protection IP65/IP67/IP69/IP69K
- LED indicator
- With holding clip for the key
- Cable outlet left
173729
EKS2-R-I1A4-B1-173729
EKS2-R-I1A4-B1-173729
- Reader unit of the Electronic-Key-System EKS2
- Suitable for installation in standard mounting hole Ø 22.5 mm
- Degree of protection IP65/IP67/IP69/IP69K
- LED indicator
- With holding clip for the key
- Cable outlet right
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Other Documents
Sales documents
Ordering data
| Ordernumber | 170904 |
| Item designation | EKS2-E-PN-M-H1-170904 |
| Gross weight | 0,149kg |
| Customs tariff number | 85365019000 |
| ECLASS | 27-39-90-90 Property, access monitor (other, unspecified) |
