KezdőlapProductsEnabling switchZSB with plus/minus pushbuttonsZSB090489

ZSB090489 (Rend. sz. 090489)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

ZSB, housing G3, 3-stage, illuminated +/- buttons, key-operated rotary switch, emergency stop, cable with plug connector RC17

3-stage function
Housing G3
Straight connecting cable, 5 m
Plug connector
Two illuminated pushbuttons
Key-operated rotary switch
EMERGENCY STOP device
Including holder

Ismertetés

Switching element

2220

2 NO/NC

Cable

The high-quality connecting cables (individual screening of the safety contacts) are available in a straight version.

Illuminated + and - buttons

These pushbuttons can be configured individually. For example, for moving axes in positive or negative direction.

Key-operated rotary switch

For individual use, e.g. as an operating mode selector.

EMERGENCY STOP device

Enabling switch with dual-channel emergency STOP device on the switch housing, for various wiring concepts. Red emergency stop button.

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Dimensional drawings

Connection examples

Shift travel diagrams

	closed, enabling
	closed
	open

Műszaki adatok

Approvals

CCC2020980305002418_CQC2009010305380679_2024

Operating and display elements

Item	Color	Extras	Version	Switching element	Slide-in label	Note slide-in label	Number	Designation1	LED
			Emergency stop device
			Illuminated - button
			Key-operated rotary switch	1NO
			Illuminated + button

Electrical connection values

Connecting cable	8x0.5 mm² + 8x0.14 mm² (4x0.5 mm² screened + 4x0.5 mm² unscreened + 8x0.14 mm² unscreened. Outer screen over everything.)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	0.8 kV
Utilization category
DC-13	2 A 24 V
AC-15	2 A 24 V
Short circuit protection according to IEC 60269-1
at 24V	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching voltage
min. at 10 mA	min. 12 V
Switching current
min. at 24 V	min. 1 mA
Degree of contamination (external, according to EN 60947-1)	3
	Display/control element
Utilization category
DC-13 Additional elements	100 mA 24 V
AC-15 Additional elements	400 mA 24 V
Short circuit protection according to IEC 60269-1
Additional elements at 24V	0.1A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)

Mechanical values and environment

Connection type	Plug connector number of pins 17
Number of NO contacts	2
Number of positively driven contacts	2
Cable length
straight	5 m
Mechanical life
Position 1-2-1	0.1 x 10⁶
Position 1-2-3-1	0.1 x 10⁶
Switching principle	Slow-action contact element
Degree of protection	IP65
Ambient temperature	-5 ... +50 °C
Material
Cap	Elastomer, low PAH, black
Housing	Plastic, yellow

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Emergency stop
B_10D	0.5 x 10⁶
	Enabling switch
B_10D	0.5 x 10⁶

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 1,9 MB)