Read-only interface adapter CIA3PL1G08
- Parallel interface
- In combination with read head CIT3ASX1N12ST
- Rail mounting
Ismertetés
Attention:
- The connecting cable to the control system is allowed to be max. 15 m long.
- On the use of a screened cable the connecting cable to the read head is allowed to be max. 15 m long.
- It is only ever possible to connect 1 read head per interface adapter.
Dimensional drawings
| 1 | Suitable for 35 mm mounting rail according to DIN 46277 |
Connection examples
Connection examples
Műszaki adatok
Operating and display elements
| LED display | |
| Yellow | ACTIVE LED data carrier active |
| Green | STATE LED operational |
Electrical connection values
| Connection cross section | 0.14 ... 2.5 mm² |
| Output type | Push-pull |
| Operating voltage DC | 20 ... 24 ... 28 V DC (All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)) |
| Input voltage | |
| 0 ... 2 V DC Low signal (Reset,Skip) | |
| 15 ... Ub V DC High signal (Reset,Skip) | |
| Switching voltage | |
| Ub-3 ... Ub V (High signal (A,B,C,D,Strobe)) | |
| 0 ... 2 V (Low signal (A,B,C,D,Strobe)) | |
| Switching current | |
| per output | -30 ... +30 mA |
| Current consumption | |
| without load | 65 ... 100 mA |
| Resistance | 4.5 kΩ for inputs (Reset,Skip) |
Mechanical values and environment
| Connection type | plug-in screw terminal |
| Number of read heads | max. 1 |
| Mounting type | TH 35 mounting rail (EN IEC 60715) |
| Ambient temperature | 0 ... +55 °C |
| Material | |
| Housing | PA6.6, gray |
Interface
| Date interface | 4-bit binary coded + strobe |
In combination with read/write head CIT3ASX1N12ST and data carrier CIS3AP10D05KH01K, CIS3AP10D05KH01K-P
| Read distance | |
| with center offset m=0 | 0 ... 3 ... 6 mm (These values apply for the surface installation of the read head and flush installation of the data carrier in ferrous metals.) |
| with center offset m=0 | 0 ... 3 ... 6.5 mm (These values apply for the surface installation of the read head and flush installation of the data carrier in non-metallic surroundings.) |
| with center offset m=0 | 0 ... 3 ... 5 mm (These values apply for the surface installation of the read head and flush installation of the data carrier in aluminum.) |
| Center offset | |
| Read distance s = 3 mm | -2,5 ... 2,5 mm (These values apply for the surface installation of the read head and flush installation of the data carrier in non-metallic surroundings.) |
Tartozékok
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Declarations of conformity
EU-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
EU-Konformitätserklärung
Dok. sz.
EDC2077155
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
UKCA-Konformitätserklärung
Dok. sz.
EDC20001517
Változat
Nyelv
Méret
0,1 MB
Egyéb dokumentumok
Rendelési adatok
| Rend. sz. | 091875 |
| Cikk neve | CIA3PL1G08 |
| Súly | 0,21kg |
| Vámtarifaszám | 85364110 |
| ECLASS | 27-28-04-01 Identification, RFID Reader |
