KezdőlapProductsEnabling switchZSB with plus/minus pushbuttonsZSB2B4G05C-C2044

ZSB2B4G05C-C2044 (Rend. sz. 092996)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

ZSB, housing G1, 3-stage, +/- buttons, cable with plug connector RC17

Housing G1
3-stage function
Straight connecting cable, 5 m
Plug connector
2 pushbuttons

Ismertetés

Switching element

2220

2 NO/NC

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

+ and - buttons

These pushbuttons can be configured individually. For example, for moving axes in positive or negative direction.

Accessories (supplied by Phoenix Contact)

Female flange connector RC17, can be soldered to male plug (Y-coded): RC-17S1Y122000

Dimensional drawings

Connection examples

Shift travel diagrams

	closed, enabling
	closed
	open

Műszaki adatok

Approvals

CCC2020980305002418_CQC2009010305380679_2024

Operating and display elements

Item	Color	Extras	Version	Switching element	Slide-in label	Note slide-in label	Number	Designation1	LED
			- button
			+ button

Electrical connection values

Connecting cable	8x0.5 mm² + 8x0.14 mm² (4x0.5 mm² screened + 4x0.5 mm² unscreened + 8x0.14 mm² unscreened. Outer screen over everything.)
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	0.8 kV
Utilization category
AC-15	2 A 24 V
DC-13	2 A 24 V
Short circuit protection according to IEC 60269-1
at 24V	2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching voltage
min. at 10 mA	min. 12 V
Switching current
min. at 24 V	min. 1 mA
Degree of contamination (external, according to EN 60947-1)	3
	Display/control element
Utilization category
DC-13 Additional elements	100 mA 24 V
AC-15 Additional elements	400 mA 24 V
Short circuit protection according to IEC 60269-1
Additional elements at 24V	0.1A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)

Mechanical values and environment

Connection type	Plug connector number of pins 17
Number of NO contacts	2
Number of positively driven contacts	2
Cable length
straight	5 m
Mechanical life
Position 1-2-1	0.1 x 10⁶
Position 1-2-3-1	0.1 x 10⁶
Switching principle	Slow-action contact element
Degree of protection	IP65
Ambient temperature	-5 ... +50 °C
Material
Housing	Plastic, black
Cap	Elastomer, low PAH, black

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	Enabling switch
B_10D	0.5 x 10⁶

Tartozékok

Mounting accessories

Magnetic holder for hand-held enabling switches

059340
MAGNETHALTERUNG ZUSTIMMTASTER

Screw holder for hand-held enabling switches

052406
HALTER KPL.

Screw holder with cable hook for hand-held enabling switches

047820
LEITUNGSHALTER

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 1,9 MB)