KezdőlapProductsElectromechanical safety switches with guard lockingTZ proven metal switchTZ1LE024SEM4AS1-C1815
Safety switch TZ ASi, plug connector M12, escape release (closed-circuit current principle)
- Auxiliary release on the front
- Escape release on the rear side with key button
- Actuating head fitted left
Ismertetés
Guard locking type
TZ1 | Closed-circuit current principle, guard locking by spring force. Release by control of AS-i output 0. |
Control of the guard locking solenoid
The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0. In addition, the 24V connection can be switched safely.
AS-Interface inputs
D0, D1 | Door monitoring contact SK |
D2, D3 | Solenoid monitoring contact ÜK |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D0 | Guard locking solenoid |
D1 | LED red |
D2 | LED green |
LED function display
- The Power LED indicates the operating voltage on the bus.
- The Fault LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Auxiliary release
This is used for releasing the guard locking with the aid of a tool. A seal and auxiliary tool are fitted to protect against tampering.
Escape release
This is used for manual release of guard locking from the danger zone without tools. The disable can be removed and readiness for operation restored only using a key included.
Dimensional drawings
| 1 | Auxiliary release |
| 2 | Escape release (red key button) |
| 3 | Plug connector not aligned |
Connection examples
| View of plug side |
Műszaki adatok
Approvals
Electrical connection values
| ASI operating current | max. 45 mA |
| ASI data in | |
| according to AS-i Safety at Work | D0, D1, D2, D3 (see positively driven contact) |
| ASI data out | |
| LED green | D2 (1 = LED on) |
| Guard locking solenoid | D0 (1 = Solenoid energized) |
| LED red | D1 (1 = LED on) |
| AS-Interface auxiliary voltage | |
| IEC 60742, PELV | 24 V -15% ... +10% |
| Auxiliary current AS-Interface | 350 mA |
| AS-Interface LED | |
| green | Power |
| red | Fault |
| AS-Interface protocol | ASi-3 |
| AS-Interface slave type | ID-Code: B, EA-Code: 7 |
| ASI voltage | 22.5 ... 30 ... 31.6 V |
| Solenoid duty cycle | 100 % |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Approach direction | |
| Actuating head left | C |
| Connection type | |
| 1 x | Plug connector M12 (4-pin) |
| Number of door position positively driven contacts | |
| according to AS-i Safety at Work | |
| Number of guard lock monitoring positively driven contacts | |
| according to AS-i Safety at Work | 1 D2,D3 (1 = locked) |
| Extraction force | 30 N |
| Actuation frequency | max. 1200 1/h |
| Actuating force | 35 N |
| Installation orientation | any |
| Insertion depth | 52 mm |
| Mechanical life | 1 x 10⁶ |
| Retention force | 10 N |
| Switching principle | Slow-action switching contact |
| Degree of protection | IP65 |
| Ambient temperature | -25 ... +55 °C |
| Material | |
| Contact | Silver alloy, gold flashed |
| Housing | Anodized die-cast alloy |
| Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| B10D | Mission time | |
|---|---|---|
| Monitoring of the guard position | 3x106 | 20 y |
| Important! Values valid at DC-13 100 mA/24V | ||
| Monitoring of guard locking | 3x106 | 20 y |
| Important! Values valid at DC-13 100 mA/24V | ||
Miscellaneous
| C number | |
| C1815 | with escape release ((mushroom-head key button)) |
In combination with actuator ACTUATOR-Z-GN
| Overtravel | 16 mm |
In combination with actuator ACTUATOR-Z-G
| Overtravel | 4 mm |
Tartozékok
Actuator
Actuator for safety switches NZ.VZ, NZ.VZ.VS and TZ
016849
BETAETIGER-Z-G
BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator
074411
BETAETIGER-Z-G/V25
BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces
072251
BETAETIGER-Z-GN
BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator
097436
BETAETIGER-Z-GME
BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator
Metal bolt
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Declarations of conformity
EU declaration of conformity
Dok. sz.
Változat
Nyelv
Méret
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. sz.
EDC2539628
Változat
Nyelv
Méret
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. sz.
EDC2539628
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
UKCA-Konformitätserklärung
Dok. sz.
EDC20001551
Változat
Nyelv
Méret
0,1 MB
Instructions
Operating instructions Safety switch TZ…AS1
Dok. sz.
Változat
Nyelv
Méret
Operating instructions Safety switch TZ…AS1
Mode d’emploi Interrupteur de sécurité TZ…AS1
Betriebsanleitung Sicherheitsschalter TZ…AS1
Istruzioni di impiego Finecorsa di sicurezza TZ…AS1
Mode d’emploi Interrupteur de sécurité TZ…AS1
Betriebsanleitung Sicherheitsschalter TZ…AS1
Istruzioni di impiego Finecorsa di sicurezza TZ…AS1
Dok. sz.
2086963
Változat
08/24
Nyelv
Méret
5,1 MB
Betriebsanleitung Sicherheitsschalter TZ…AS1
Dok. sz.
2086963
Változat
08/24
Nyelv
Méret
1,3 MB
Инструкция по эксплуатации Предохранительный выключатель TZ…AS1
Dok. sz.
2086963
Változat
08/24
Nyelv
Méret
1,8 MB
Egyéb dokumentumok
Approvals and certificates
CCC
Dok. sz.
Változat
Nyelv
Méret
CCC
Dok. sz.
20001751
Változat
Nyelv
Méret
0,0 MB
DNV-GL
Dok. sz.
Változat
Nyelv
Méret
DNV-GL
Dok. sz.
Változat
Nyelv
Méret
0,2 MB
c UL us
Dok. sz.
Változat
Nyelv
Méret
c UL us
Dok. sz.
Változat
Nyelv
Méret
0,3 MB
Sales documents
Interrupteurs de sécurité avec AS-Interface
Dok. sz.
Változat
Nyelv
Méret
Interrupteurs de sécurité avec AS-Interface
Dok. sz.
112564
Változat
12-03/21
Nyelv
Méret
4,9 MB
Rendelési adatok
| Rend. sz. | 094422 |
| Cikk neve | TZ1LE024SEM4AS1-C1815 |
| Súly | 1,372kg |
| Vámtarifaszám | 85365019000 |
| ECLASS | 27-27-26-03 Safety switch with guard control |
