KezdőlapProductsElectromechanical safety switches with guard lockingTX metal switchTX1B-A024SEM4AS1C1991
Safety switch TX ASi, plug connector M12 (closed-circuit current principle)
- Auxiliary release on the front
- Plug connector M12
- with escape release
Ismertetés
Guard locking type
TX1 | Closed-circuit current principle, guard locking by spring force. Release by control of AS-i output 0. |
Control of the guard locking solenoid
The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0. In addition, the 24V connection can be switched safely.
AS-Interface inputs
D0, D1 | Positively driven NC contact 1 (safety door monitor) |
D2, D3 | Positively driven NC contact 2 (guard lock monitoring) |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D1 | LED red |
D2 | LED green |
Internal LED function display
- The Power LED indicates the operating voltage on the bus.
- The Fault LED indicates if a fault has been detected on the AS-Interface bus.
External LED function display
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Auxiliary release
This is used for releasing the guard locking with the aid of a tool. To protect against tampering, the auxiliary release is sealed with sealing lacquer.
Escape release
This is used for manual release of guard locking from the danger zone without tools. With identification of On/Off position.
Dimensional drawings
| 1 | Auxiliary release |
| 2 | LED indicator |
| 3 | Locking screw |
| 4 | Escape release, basic position |
| 5 | Escape release, unlocked position |
Connection examples
| View of plug side |
Műszaki adatok
Approvals
Electrical connection values
| ASI operating current | max. 45 mA |
| ASI data in | |
| according to AS-i Safety at Work | D0, D1, D2, D3 (see positively driven contact) |
| ASI data out | |
| Guard locking solenoid | D0 (1 = Solenoid energized) |
| LED green | D2 (1 = LED on) |
| LED red | D1 (1 = LED on) |
| AS-Interface auxiliary voltage | |
| IEC 60742, PELV | 24 V -15% ... +10% |
| Auxiliary current AS-Interface | 300 mA |
| AS-Interface protocol | ASi-3 |
| AS-Interface slave type | ID-Code: B, EA-Code: 7 |
| ASI voltage | 22.5 ... 30 ... 31.6 V |
| Solenoid duty cycle | 100 % |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Connection type | |
| 1 x | Plug connector M12 (4-pin) |
| Number of door position positively driven contacts | |
| according to AS-i Safety at Work | |
| Number of guard lock monitoring positively driven contacts | |
| according to AS-i Safety at Work | 1 D2,D3 (1 = locked) |
| Extraction force | 35 N |
| Actuation frequency | max. 1200 1/h |
| Actuating force | 35 N |
| Installation orientation | any |
| Insertion depth | 32 mm |
| Mechanical life | 1 x 10⁶ |
| Retention force | 20 N |
| Switching principle | Slow-action switching contact |
| Degree of protection | IP67 |
| Ambient temperature | -20 ... +50 °C |
| Material | |
| Housing | Die-cast alloy cathodically dipped |
| Contact | Silver alloy, gold flashed |
| Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| B10D | Mission time | |
|---|---|---|
| Monitoring of the guard position | 5x106 | 20 y |
| Important! Values valid at DC-13 100 mA/24V | ||
| Monitoring of guard locking | 5x106 | 20 y |
| Important! Values valid at DC-13 100 mA/24V | ||
Miscellaneous
| C number | |
| C1991 | Escape release |
In combination with actuator ACTUATOR-X-GQ
| Overtravel | 1 mm |
In combination with actuator ACTUATOR-X-GNQ
| Overtravel | 8 mm |
Tartozékok
Actuator
Function expansion
Metal bolt
Bolt with escape release for safety switches TX...C1991 and 2161
085392
RIEGEL TX-AF
RIEGEL TX-AF
- Bolt for safety switch with escape release TX...C1991 and 2161
- Steel bolt
- For doors hinged on the right
- escape lever
- Detent knob in open position
- Suitable for a door gap of approx. 15 mm
085393
RIEGEL TX-CF
RIEGEL TX-CF
- Bolt for safety switch with escape release TX...C1991 and 2161
- Steel bolt
- For doors hinged on the left
- escape lever
- Detent knob in open position
- Suitable for a door gap of approx. 15 mm
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Declarations of conformity
EU declaration of conformity
Dok. sz.
Változat
Nyelv
Méret
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. sz.
EDC2539628
Változat
Nyelv
Méret
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. sz.
EDC2539628
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
UKCA-Konformitätserklärung
Dok. sz.
EDC20001551
Változat
Nyelv
Méret
0,1 MB
Instructions
Operating Instructions Safety Switch TX…AS1
Dok. sz.
Változat
Nyelv
Méret
Operating Instructions Safety Switch TX…AS1
Mode d’emploi Interrupteur de sécurité TX…AS1
Manual de instrucciones Interruptor de seguridad TX…AS1
Betriebsanleitung Sicherheitsschalter TX…AS1
Mode d’emploi Interrupteur de sécurité TX…AS1
Manual de instrucciones Interruptor de seguridad TX…AS1
Betriebsanleitung Sicherheitsschalter TX…AS1
Dok. sz.
2094632
Változat
01/24
Nyelv
Méret
3,4 MB
Betriebsanleitung Sicherheitsschalter TX…AS1
Dok. sz.
2094632
Változat
01/24
Nyelv
Méret
0,9 MB
Egyéb dokumentumok
Approvals and certificates
CCC
Dok. sz.
Változat
Nyelv
Méret
CCC
Dok. sz.
20001751
Változat
Nyelv
Méret
0,0 MB
DGUV
Dok. sz.
Változat
Nyelv
Méret
DGUV
Dok. sz.
Változat
Nyelv
Méret
3,2 MB
DNV-GL
Dok. sz.
Változat
Nyelv
Méret
DNV-GL
Dok. sz.
Változat
Nyelv
Méret
0,2 MB
c UL us
Dok. sz.
Változat
Nyelv
Méret
c UL us
Dok. sz.
Változat
Nyelv
Méret
0,3 MB
Rendelési adatok
| Rend. sz. | 095914 |
| Cikk neve | TX1B-A024SEM4AS1C1991 |
| Súly | 0,936kg |
| Vámtarifaszám | 85365019000 |
| ECLASS | 27-27-26-03 Safety switch with guard control |
