KezdőlapProductsPosition switches and multiple limit switchesMultiple limit switch, upright RGBFRGBF03R12-514AM-M

RGBF03R12-514AM-M (Rend. sz. 097352)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Series RGBF...AM, 12 mm, mechanical

With exterior diaphragm
Plunger spacing 12 mm
Upright housing according to DIN 43697
Degree of protection IP67 according to IEC 60529

Ismertetés

Exterior diaphragm

The exterior diaphragm protects the plunger guide against the entry of very fine dust (dust from grinding, casting, glass, etc.) and prevents the plunger from seizing. At the same time, plunger sticking, caused by resinous lubricating coolants, can be prevented with this exterior diaphragm version.

Switching element

ES 514

Snap-action switching contact 1 NC + 1 NO

On the usage of safety switching elements, the dog distance must be maintained to achieve the positively driven travel. The dogs must be positively mounted according to EN ISO 14119, i.e. riveted, welded or secured in some other way against becoming loose.

LED function display

LED function display possible on request.

Dimensional drawings

1	Operating point
1)	Pressure sensitive label 041734 applied.
2	Free position
3	Groove with sealing ring
4	Safety switching element ES 514 positive opening. Positive opening function is dependent on maintaining this distance. Actuators (dogs) must be connected to the machine in a flush position. Switch can be replaced only with the same type.
5	Number of plungers

Connection examples

Műszaki adatok

Approvals

Electrical connection values

Connection cross section	0.34 ... 1.5 mm²
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	4 kV
Utilization category
AC-15	2.5 A 230 V
DC-13	6 A 24 V
Short circuit protection according to IEC 60269-1	6A gG
Switching current
min. at DC 24V	min. 5 mA
thermal rated current I_th	10 A

Mechanical values and environment

Approach speed	0.01 ... 50 m/min
Connection type
4 x	M25 x 1.5
Number of switching elements	3
Number of NO contacts	3
Number of positively driven contacts	3
Design	upright, according to DIN 43697
Actuating element
Slide bearing	Roller plunger (d roll = 5 mm)
Actuating force	min. 30 N
Installation orientation	any
Mechanical life	1 x 10⁶
Switching principle	Snap-action switching contact (Contact closing time ≤ 5 ms, contact bounce time ≤ 3 ms)
Degree of protection	IP67
Plunger spacing	12 mm
Ambient temperature	-5 ... +80 °C
Material
Contact	Silver alloy, gold flashed
Housing	Die-cast aluminum, anodized

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B_10D	2 x 10⁶

B_10D

2 x 10⁶

Miscellaneous

Additional feature	(Exterior diaphragm = AM. The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)

Additional feature

(Exterior diaphragm = AM. The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 2,1 MB)