KezdőlapProductsMultifunctional Gate Box MGBMGB-APMGB-L1H-APA-L-115179

MGB-L1H-APA-L-115179 (Rend. sz. 115179)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Locking set MGB-L1H-APA... (guard locking by spring force) with 2 pushbuttons, emergency stop

Guard locking with guard lock monitoring
Emergency stop according to ISO 13850
1 pushbutton (illuminated, with symbol “Unlocked,” wh)
1 pushbutton (illuminated, with symbol “Locked,” wh)
With cable entry
Unicode

Ismertetés

Guard locking type

MGB-L1...

The locking arm is held in the locked position by spring force and is unlocked by solenoid force (closed-circuit current principle, mechanically locked).

OD	ON when the door is closed
OT	Bolt tongue inserted into the evaluation module
OL	Guard locking solenoid in locked position
OI	Diagnostics; there is a fault

S2	1 NO contact, white, illuminated (symbol: unlocked)
S3	1 NO contact, white, illuminated (symbol: locked)

Installation orientation	Door hinge DIN left
Degree of protection	IP65
Ambient temperature	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Item	Color	Extras	Version	Switching element
1		with monitoring contact	Emergency stop	2 PD + 1 NO
2	white	printed	Illuminated pushbutton	1NO
3	white	printed	Illuminated pushbutton	1NO

Connection cross section
(rigid/flexible) with cable end sleeve according to DIN 46 228/1	0.25 ... 1.5 mm²
(rigid/flexible)	0.13 ... 1.5 mm² ((AWG 24 ... AWG 16))
(rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1	0.25 ... 0.75 mm²
Rated insulation voltage U_i	30 V
Rated impulse withstand voltage U_imp	1.5 kV
Discrepancy time
between FO1A and FO1B	max. 10 ms
Utilization category
DC-13	24 V 200 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Risk time according to EN 60947-5-3	max. 350 ms
Safety class	III
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Solenoid control input IMP1, IMP2, IMM
Test pulse duration	max. 5 ms
Test pulse interval	min. 100 ms
	Controls and indicators
Breaking capacity	max. 0.25 W
Switching voltage	U_A V
Switching current	1 ... 10 mA
LED power supply	24 V DC
	Emergency stop
Breaking capacity	max. 0.25 W
Switching voltage	5 ... 24 V
Switching current	1 ... 100 mA
LED power supply	24 V DC
	Monitoring outputs OD, OT, OL, OI
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage	UA-2V ... UA V DC (Value at a switching current of 50mA without taking into account the cable lengths)
Output current	max. 50 mA
	Safety outputs FO1A, FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
U_FO1A /U_FO1B HIGH	UB-2V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths)
U_FO1A /U_FO1B LOW	0 ... 1 V DC
Output current
per safety output FO1A / FO1B	1 ... 200 mA
Test pulse duration	max. 0.3 ms
Test pulse interval	min. 100 ms
	Power supply U_A
Operating voltage DC
U_A	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Current consumption
I_UA	max. 375 mA ((with energized guard locking solenoid and unloaded outputs OD, OT, OL, OI, +20 °C, 24V))
	Power supply U_B
Operating voltage DC
U_B	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Current consumption
I_UB	max. 80 mA ((no load on outputs))

Connection type	Cable entries M20x1.5
Installation orientation	Door hinge DIN left
Switching frequency	0.25 Hz
Mechanical life
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
	1 x 10⁶
Degree of protection	IP65
Ambient temperature
at U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic; nickel-plated die-cast zinc; stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Closed-circuit current principle

Mission time	20 y
	Control of guard locking
Category	4
Performance Level	PL e
PFH_D	2.8 x 10^-9
	Emergency stop
B_10D
Emergency stop	0.13 x 10⁶
	Monitoring of guard locking and the guard position
Category	4
Performance Level	PL e
PFH_D	3.7 x 10^-9

Rend. sz.	115179
Cikk neve	MGB-L1H-APA-L-115179
Súly	2,237kg
Vámtarifaszám	85371098
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

MGB-L1H-APA-L-115179 (Rend. sz. 115179)

Locking set MGB-L1H-APA... (guard locking by spring force) with 2 pushbuttons, emergency stop

Ismertetés

Guard locking type

Door hinge

LED indicator

Monitoring outputs

Emergency stop device

Pushbuttons

Dimensional drawings

Connection examples

Műszaki adatok

Approvals

Handle modules MGB-H-AA1A1-L-106619 (Order no. 106619)

Mechanical values and environment

Miscellaneous

Locking modules MGB-L1-APA-AG4A1-M-115225 (Order no. 115225)

Operating and display elements

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Komponensek

Tartozékok

Letöltések

Teljes csomag

Egyedi dokumentumok

Egyéb dokumentumok

CAD-adatok

Rendelési adatok

Cookie-értesítés