KezdőlapProductsTransponder-coded safety switches without guard lockingCES-AP safety switchCES-I-AP-M-C04-USB-117324

CES-I-AP-M-C04-USB-117324 (Rend. sz. 117324)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Non-contact safety switches CES-I-AP-.-C04-…, M12

Safety switch with integrated evaluation electronics
No series connection
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Category 4 / PL e according to EN ISO 13849-1
Three active faces
Connecting cable PUR, 0.22 m, plug connector M12, 5-core
Multicode
Monitoring output OD

CES-I-AP-M-C04-USB-117324 (Rend. sz. 117324)

Ismertetés

Installation position

Permissible installation position

Multicode evaluation

Every suitable actuator is detected by the switch.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

Category 4/PL e according to EN 13849-1

Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Connector assignment

Pin	Designation	Function	Connecting cable conductor coloring
1	UB	Power supply, DC 24 V	BN
2	FO1A	Safety output, channel 1	WH
3	0 V	Ground, DC 0 V	BU
4	FO1B	Safety output, channel 2	BK
5	OD	Monitoring output	GY

Dimensional drawings

1	Active face
2	LED status indication
3	With rubber support

Connection examples

Műszaki adatok

Approvals

Workspace

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection values

Fuse
external (operating voltage)	0.25 ... 8 A
Rated insulation voltage U_i	300 V
Rated impulse withstand voltage U_imp	1.5 kV
Operating voltage DC
U_B	24 V DC -15% ... +15% regulated, residual ripple<5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Turn-on time
Safety outputs	max. 300 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Current consumption
no load on outputs	max. 35 mA
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD
Output type	p-switching, short circuit-proof
Output voltage	0.8 x UB ... UB V DC
Switching current	max. 50 mA
	Safety outputs FO1A / FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
HIGH U(FO1A) / U(FO1B)	UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
rated conditional short-circuit current	100 A
Discrepancy time	max. 10 ms
Utilization category
DC-13	24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current Ir	max. 0.25 mA
Switching current
per safety output	1 ... 150 mA
Test pulse duration	max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm)
Test pulse interval	min. 100 ms

Mechanical values and environment

Connection type	PUR cable, 200 mm, with plug connector M12x1, 5-pin
Tightening torque
Fixing screws	max. 0.8 Nm
Ready delay	0.5 s
Dynamic bending radius	10 x cable diameter
Static bending radius	5 x cable diameter
Installation orientation	any
Switching frequency	max. 1 Hz
Mounting distance
between switches	min. 80 mm
Mounting type	non-flush on metal
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP67
Cable ambient temperature (dynamic)	-25 ... +65 °C
Cable ambient temperature (static)	-25 ... +65 °C
Material
Housing	Plastic, PBT
Rubber support	NBR 80 ±5 Shore

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	-	4.1x10^-9	4	20 y

Miscellaneous

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures
Additional feature	Rubber support included

In combination with actuator CES-A-BBN-C04-115271, CES-A-BBN-C04-EX-137527

Switch-on distance
Installation position C or D (broad side)	11 mm
Installation position A or B (front side)	15 mm
Secured switch-off distance s_ar
in x/z direction	max. 40 mm
in y direction	max. 60 mm
Secured switching distance s_ao
Installation position C or D (broad side)	min. 6 mm
Installation position A or B (front side)	min. 10 mm
Switching hysteresis	1 ... 2 mm

In combination with actuator CES-A-BDN-06-161742

Switch-on distance
Installation position A	25 mm
Installation position C	20 mm
Secured switch-off distance s_ar
Installation position C	max. 72 mm
Installation position A	max. 77 mm
Secured switching distance s_ao
Installation position C	min. 10 mm
Installation position A	min. 15 mm
Switching hysteresis	1 ... 2 mm

In combination with actuator CES-A-BDN-06-104730

Switch-on distance
Installation position A or B (front side)	19 mm
Installation position C or D (broad side)	15 mm
Secured switch-off distance s_ar
in x/z direction	max. 40 mm
in y direction	max. 60 mm
Secured switching distance s_ao
Installation position A or B (front side)	min. 14 mm
Installation position C or D (broad side)	min. 10 mm
Switching hysteresis	1 ... 2 mm

In combination with actuator CES-A-BBN-161502

Switch-on distance
Installation position A + B	25 mm
Installation position C + D	20 mm
Secured switch-off distance s_ar
in x/z direction / installation position A + B	max. 69 mm
in x/z direction / installation position C + D	max. 64 mm
in y direction / installation position A + B	max. 77 mm
in y direction / installation position C + D	max. 72 mm
Secured switching distance s_ao
in z direction / installation position A + B	min. 15 mm
in x direction/installation position C + D	min. 10 mm
Switching hysteresis
in z direction / installation position A + B	1 ... 2 mm
in x direction/installation position C + D	1 ... 2 mm

Tartozékok

Actuator

Actuator CES-A-BBN-C04

115271
CES-A-BBN-C04-115271

Cube-shaped design 42 x 25 mm
Two safety screws M4x20 and rubber support included

161502
CES-A-BBN-161502

Cube-shaped design 42 x 25 mm, height 12 mm
Transponder with large actuating range
Mounting compatible with actuators: CES-A-BBA-071840, CES-BBN-106600, CES-A-BBN-C04-115271
Two safety screws M4x14 included

Actuator CES-A-BDN-06

104730
CES-A-BDN-06-104730

Cylindrical design, Ø 6x26 mm
Transponder coded, high coding level

161742
CES-A-BDN-06-161742

Cylindrical design, Ø 6x38 mm
Transponder coded, high coding level
Large actuating range

CEM-C60

Variable magnetic guard locking device CEM-C60 with permanent magnet, plug connector on left

161320
CEM-M2-C60-PZ-SE-161320

Magnetic guard locking for process protection
Guard locking solenoid with locking force of 650 N
Function expansion for safety switch CES-C04 / CES-C07
Flexibility through a large selection of safety switches
Maximum safety level PL e / category 4 for detection of the door position in combination with CES-C04 / CES-C07
Transponder coding enables high level of protection against tampering
Simple connection of the solenoid using M12 plug connector, 5-pin
Yellow LED to indicate voltage at the solenoid
Nickel-plated solenoid surface with high corrosion resistance
Integrated permanent magnet, 30 N adhesive force

Variable magnetic guard locking device CEM-C60 without permanent magnet, plug connector on left

163252
CEM-M2-C60-KZ-SE-163252

Magnetic guard locking for process protection
Locking force 650 N (without permanent magnet)
With remanence
Function expansion for safety switch CES-C04 / CES-C07
Flexibility through a large selection of safety switches
Maximum safety level PL e / category 4 for detection of the door position in combination with CES-C04 / CES-C07
Transponder coding enables high level of protection against tampering
Simple connection of the solenoid using M12 plug connector, 5-pin
Yellow LED to indicate voltage at the solenoid
Nickel-plated solenoid surface with high corrosion resistance

Connection material

Connecting cable with 2 plug connectors M12, 5-pin, 0.22 m, AIDA standard

163573
C-M12F05-05X034PU0,22-M12M05-163573

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 0.22 m

Connecting cable with 2 plug connectors M12, 5-pin, 1.5 m, AIDA standard

159363
C-M12F05-05X034PU01,5-M12M05-159363

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 1.5 m

Connecting cable with 2 plug connectors M12, 5-pin, 10 m

100181
C-M12F05-05X034PV10,0-M12M05-100181

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
PVC cable
Cable length 10 m

Connecting cable with 2 plug connectors M12, 5-pin, 10 m, AIDA standard

159920
C-M12F05-05X034PU10,0-M12M05-159920

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 10 m

Connecting cable with 2 plug connectors M12, 5-pin, 15 m, AIDA standard

159921
C-M12F05-05X034PU15,0-M12M05-159921

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 15 m

Connecting cable with 2 plug connectors M12, 5-pin, 1 m, AIDA standard

159362
C-M12F05-05X034PU01,0-M12M05-159362

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 1 m

Connecting cable with 2 plug connectors M12, 5-pin, 20 m

100182
C-M12F05-05X034PV20,0-M12M05-100182

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
PVC cable
Cable length 20 m

Connecting cable with 2 plug connectors M12, 5-pin, 3 m, AIDA standard

159364
C-M12F05-05X034PU03,0-M12M05-159364

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 3 m

Connecting cable with 2 plug connectors M12, 5-pin, 5 m

100180
C-M12F05-05X034PV05,0-M12M05-100180

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
PVC cable
Cable length 5 m

Connecting cable with 2 plug connectors M12, 5-pin, 5 m, AIDA standard

159365
C-M12F05-05X034PU05,0-M12M05-159365

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 5 m

Connecting cable with 2 plug connectors M12, 5-pin, 8 m, AIDA standard

159919
C-M12F05-05X034PU08,0-M12M05-159919

M12 female plug to M12 plug connector, 5-pin
Straight female plug and plug connector
Connecting cable according to AIDA standard
PUR cable, sheath color yellow
Cable length 8 m

Connecting cable with angled plug connector M12, 5-pin, 10 m

113187
C-M12F05-05X025PU10,0-MA-113187

M12 female plug, 5-pin
Angled plug connector
PUR cable
Cable length 10 m
Cable exit A (right)
With flying lead

113190
C-M12F05-05X025PU10,0-MA-113190

M12 female plug, 5-pin
Angled plug connector
PUR cable
Cable length 10 m
Cable exit C (left)
With flying lead

Connecting cable with straight plug connector M12, 5-pin, 10 m

100184
C-M12F05-05X034PV10,0-MA-100184

M12 female plug, 5-pin
Straight plug connector
PVC cable
Cable length 10 m
With flying lead

113640
C-M12F05-05X034PU10,0-MA-113640

M12 female plug, 5-pin
Straight plug connector
PUR cable
Cable length 10 m
With flying lead

Connecting cable with straight plug connector M12, 5-pin, 20 m

100185
C-M12F05-05X034PV20,0-MA-100185

M12 female plug, 5-pin
Straight plug connector
PVC cable
Cable length 20 m
With flying lead

113682
C-M12F05-05X034PU20,0-MA-113682

M12 female plug, 5-pin
Straight plug connector
PUR cable
Cable length 20 m
With flying lead

Connecting cable with straight plug connector M12, 5-pin, 30 m

122784
C-M12F05-05X034PU30,0-MA-122784

M12 female plug, 5-pin
Straight plug connector
PUR cable
Cable length 30 m
With flying lead

Connecting cable with straight plug connector M12, 5-pin, 5 m

100183
C-M12F05-05X034PV05,0-MA-100183

M12 female plug, 5-pin
Straight plug connector
PVC cable
Cable length 5 m
With flying lead

113620
C-M12F05-05X034PU05,0-MA-113620

M12 female plug, 5-pin
Straight plug connector
PUR cable
Cable length 5 m
With flying lead

Connecting cable with straight plug connector M12, 5-pin, 50 m

156064
C-M12F05-05X034PV50,0-MA-156064

M12 female plug, 5-pin
Straight plug connector
PVC cable
Cable length 50 m
With flying lead

M12 extension PUR, 5-pin, plug connectors at both ends, 10 m

115565
C-M12F05-05X025PU10,0-M12M05-115565

M12 female plug, 5-pin (angled) to M12 plug connector (straight)
plug connectors at both ends
PUR cable
Cable length 10 m
with cable exit A (right)

115566
C-M12F05-05X025PU10,0-M12M05-115566

M12 female plug, 5-pin (angled) to M12 plug connector (straight)
plug connectors at both ends
PUR cable
Cable length 10 m
with cable exit C (left)

Function expansion

ATEX housing guard

137528
AM-C-C04-EX-137528

The housing guard is suitable for all CES-C04-AP/AR switches.
The housing guard makes it possible to use safety switches CES-C04 in potentially explosive atmospheres.
Protection of the switch and plug connector against possible impacts
The safety switch is not included and must be ordered separately.
When the PBT/PC plastic housing guard is used, the CES-C04 switches (with connecting cable or plug connector) comply with the relevant explosion-protection standards according to ATEX (zone 2/22).

Metal bolt

Bolt for safety switch CES-C04

121646
BTC-CES04-S-TH-20-X-121646

Bolt for switch CES-C04
Aluminum bolt
For doors hinged on the left or right
Spring catch in closed position
Suitable for a door gap of approx. 7 mm
Protective bracket for safety switch

Bolt with escape release, for safety switch CES-C04

123583
BTC-CES04-S-TH-21-F-123583

Bolt for switch CES-C04
Aluminum bolt
For doors hinged on the left or right
Bolt with escape lever
Detent knob in open position
Spring catch in closed position
Suitable for a door gap of approx. 7 mm
Protective bracket for safety switch

Mounting accessories

Mounting plate AM-SET-PP

119690
AM-SET-PP-119690

Set consists of two mounting plates

Mounting set AM-SET-PPB

119694
AM-SET-PPB-119694

Mounting plate
Angle mounting plate
Spacer

Safety screws M4 x 20

116978
M4X20-NIRO/V20

Safety screws M4 x 20
Packaging unit 20 pieces

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 6,8 MB)