KezdőlapProductsTransponder-coded safety switches without guard lockingCES-AP safety switchCES-I-AP-M-C04-SK-117325

CES-I-AP-M-C04-SK-117325 (Rend. sz. 117325)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Non-contact safety switches CES-I-AP-.-C04-…, M8

Safety switch with integrated evaluation electronics
No series connection
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Category 4 / PL e according to EN ISO 13849-1
Three active faces
With plug connector M8, 4-pin
Multicode

CES-I-AP-M-C04-SK-117325 (Rend. sz. 117325)

Ismertetés

Installation position

Permissible installation position

Multicode evaluation

Every suitable actuator is detected by the switch.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

Category 4/PL e according to EN 13849-1

Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Connector assignment

Pin	Designation	Function	Connecting cable conductor coloring
1	UB	Power supply, DC 24 V	BN
2	FO1A	Safety output, channel 1	WH
3	0 V	Ground, DC 0 V	BU
4	FO1B	Safety output, channel 2	BK

Dimensional drawings

1	Active face
2	LED status indication
3	With rubber support
4	With the installation orientation shown: cable outlet on left or right

Connection examples

Műszaki adatok

Approvals

Workspace

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection values

Fuse
external (operating voltage)	0.25 ... 8 A
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	1.5 kV
Operating voltage DC
U_B	24 V DC -15% ... +15% regulated, residual ripple<5%, PELV (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the outputs.)
Turn-on time
Safety outputs	max. 300 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Current consumption
no load on outputs	max. 35 mA
Degree of contamination (external, according to EN 60947-1)	3
	Safety outputs FO1A / FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
HIGH U(FO1A) / U(FO1B)	UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
rated conditional short-circuit current	100 A
Discrepancy time	max. 10 ms
Utilization category
DC-13	24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current Ir	max. 0.25 mA
Switching current
per safety output	1 ... 150 mA
Test pulse duration	max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm)
Test pulse interval	min. 100 ms

Mechanical values and environment

Connection type	M8 plug connector, 4-pin
Tightening torque
Fixing screws	max. 0.8 Nm
Ready delay	0.5 s
Installation orientation	any
Switching frequency	max. 1 Hz
Mounting distance
between switches	min. 80 mm
Mounting type	non-flush on metal
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP67/IP69K
Ambient temperature	-25 ... +65 °C
Material
Rubber support	NBR 80 ±5 Shore
Housing	Plastic, PBT

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	-	4.1x10^-9	4	20 y

Miscellaneous

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures
Additional feature	Rubber support included

In combination with actuator CES-A-BBN-C04-115271, CES-A-BBN-C04-EX-137527

Switch-on distance
Installation position C or D (broad side)	11 mm
Installation position A or B (front side)	15 mm
Secured switch-off distance s_ar
in y direction	max. 60 mm
in x/z direction	max. 40 mm
Secured switching distance s_ao
Installation position A or B (front side)	min. 10 mm
Installation position C or D (broad side)	min. 6 mm
Switching hysteresis	1 ... 2 mm

In combination with actuator CES-A-BBN-161502

Switch-on distance
Installation position A + B	25 mm
Installation position C + D	20 mm
Secured switch-off distance s_ar
in y direction / installation position C + D	max. 72 mm
in y direction / installation position A + B	max. 77 mm
in x/z direction / installation position A + B	max. 69 mm
in x/z direction / installation position C + D	max. 64 mm
Secured switching distance s_ao
in z direction / installation position A + B	min. 15 mm
in x direction/installation position C + D	min. 10 mm
Switching hysteresis
in z direction / installation position A + B	1 ... 2 mm
in x direction/installation position C + D	1 ... 2 mm

In combination with actuator CES-A-BDN-06-104730

Switch-on distance
Installation position A or B (front side)	19 mm
Installation position C or D (broad side)	15 mm
Secured switch-off distance s_ar
in x/z direction	max. 40 mm
in y direction	max. 60 mm
Secured switching distance s_ao
Installation position A or B (front side)	min. 14 mm
Installation position C or D (broad side)	min. 10 mm
Switching hysteresis	1 ... 2 mm

In combination with actuator CES-A-BDN-06-161742

Switch-on distance
Installation position C	20 mm
Installation position A	25 mm
Secured switch-off distance s_ar
Installation position C	max. 72 mm
Installation position A	max. 77 mm
Secured switching distance s_ao
Installation position A	min. 15 mm
Installation position C	min. 10 mm
Switching hysteresis	1 ... 2 mm

Tartozékok

Actuator

Actuator CES-A-BBN-C04

115271
CES-A-BBN-C04-115271

Cube-shaped design 42 x 25 mm
Two safety screws M4x20 and rubber support included

161502
CES-A-BBN-161502

Cube-shaped design 42 x 25 mm, height 12 mm
Transponder with large actuating range
Mounting compatible with actuators: CES-A-BBA-071840, CES-BBN-106600, CES-A-BBN-C04-115271
Two safety screws M4x14 included

Actuator CES-A-BDN-06

104730
CES-A-BDN-06-104730

Cylindrical design, Ø 6x26 mm
Transponder coded, high coding level

161742
CES-A-BDN-06-161742

Cylindrical design, Ø 6x38 mm
Transponder coded, high coding level
Large actuating range

CEM-C60

Variable magnetic guard locking device CEM-C60 with permanent magnet, plug connector on left

161320
CEM-M2-C60-PZ-SE-161320

Magnetic guard locking for process protection
Guard locking solenoid with locking force of 650 N
Function expansion for safety switch CES-C04 / CES-C07
Flexibility through a large selection of safety switches
Maximum safety level PL e / category 4 for detection of the door position in combination with CES-C04 / CES-C07
Transponder coding enables high level of protection against tampering
Simple connection of the solenoid using M12 plug connector, 5-pin
Yellow LED to indicate voltage at the solenoid
Nickel-plated solenoid surface with high corrosion resistance
Integrated permanent magnet, 30 N adhesive force

Variable magnetic guard locking device CEM-C60 without permanent magnet, plug connector on left

163252
CEM-M2-C60-KZ-SE-163252

Magnetic guard locking for process protection
Locking force 650 N (without permanent magnet)
With remanence
Function expansion for safety switch CES-C04 / CES-C07
Flexibility through a large selection of safety switches
Maximum safety level PL e / category 4 for detection of the door position in combination with CES-C04 / CES-C07
Transponder coding enables high level of protection against tampering
Simple connection of the solenoid using M12 plug connector, 5-pin
Yellow LED to indicate voltage at the solenoid
Nickel-plated solenoid surface with high corrosion resistance

Connection material

Connecting cable with angled plug connector M8, 4-pin, 10 m

084703
C-M08F04-04X025PV10,0-ES-084703

M8 female plug, 4-pin
Angled plug connector
Cable exit A (right)
PVC cable
Cable length 10 m
With flying lead

Connecting cable with plug connector M8, 4-pin, 10 m

088814
C-M08F04-04X025PV10,0-ES-088814

M8 female plug, 4-pin
Straight plug connector
PVC cable
Cable length 10 m
With flying lead

116050
C-M08F04-04X034PU10,0-ES-116050

M8 female plug, 4-pin
Straight plug connector
PUR cable
Cable length 10 m
With flying lead

Connecting cable with plug connector M8, 4-pin, 15 m

088815
C-M08F04-04X025PV15,0-ES-088815

M8 female plug, 4-pin
Straight plug connector
PVC cable
Cable length 15 m
With flying lead

Connecting cable with plug connector M8, 4-pin, 20 m

116051
C-M08F04-04X034PU20,0-ES-116051

M8 female plug, 4-pin
Straight plug connector
PUR cable
Cable length 20 m
With flying lead

Connecting cable with plug connector M8, 4-pin, 25 m

095035
C-M08F04-04X025PV25,0-ES-095035

M8 female plug, 4-pin
Straight plug connector
PVC cable
Cable length 25 m
With flying lead

Connecting cable with plug connector M8, 4-pin, 5 m

088813
C-M08F04-04X025PV05,0-ES-088813

M8 female plug, 4-pin
Straight plug connector
PVC cable
Cable length 5 m
With flying lead

116049
C-M08F04-04X034PU05,0-ES-116049

M8 female plug, 4-pin
Straight plug connector
PUR cable
Cable length 5 m
With flying lead

Function expansion

ATEX housing guard

137528
AM-C-C04-EX-137528

The housing guard is suitable for all CES-C04-AP/AR switches.
The housing guard makes it possible to use safety switches CES-C04 in potentially explosive atmospheres.
Protection of the switch and plug connector against possible impacts
The safety switch is not included and must be ordered separately.
When the PBT/PC plastic housing guard is used, the CES-C04 switches (with connecting cable or plug connector) comply with the relevant explosion-protection standards according to ATEX (zone 2/22).

Metal bolt

Bolt for safety switch CES-C04

121646
BTC-CES04-S-TH-20-X-121646

Bolt for switch CES-C04
Aluminum bolt
For doors hinged on the left or right
Spring catch in closed position
Suitable for a door gap of approx. 7 mm
Protective bracket for safety switch

Bolt with escape release, for safety switch CES-C04

123583
BTC-CES04-S-TH-21-F-123583

Bolt for switch CES-C04
Aluminum bolt
For doors hinged on the left or right
Bolt with escape lever
Detent knob in open position
Spring catch in closed position
Suitable for a door gap of approx. 7 mm
Protective bracket for safety switch

Mounting accessories

Mounting plate AM-SET-PP

119690
AM-SET-PP-119690

Set consists of two mounting plates

Mounting set AM-SET-PPB

119694
AM-SET-PPB-119694

Mounting plate
Angle mounting plate
Spacer

Safety screws M4 x 20

116978
M4X20-NIRO/V20

Safety screws M4 x 20
Packaging unit 20 pieces

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 6,8 MB)