KezdőlapProductsTransponder-coded safety switches with guard lockingCETCET-ASCET4-AS-CRB-AB-50X-1-120008
Safety switch CET-AS – with AS-i connection, plug connector M12 (open-circuit current principle)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Category 4 / PL e according to EN ISO 13849-1
- Unicode
- Approach direction B (delivery state)
Ismertetés
Approach direction
Horizontal
Can be adjusted in 90° steps
Guard locking type
CET4 | Open-circuit current principle. Guard locking by control of AS-i output 0. Release by spring force. |
Control of the guard locking solenoid
The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0.
AS-Interface inputs
D0, D1 | Door monitoring |
D2, D3 | Guard lock monitoring |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D0 | Guard locking |
D1 | LED red |
D2 | LED green |
LED function display
- The ASI LED indicates the operating voltage on the bus.
- The State LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Dimensional drawings
Connection examples
| View of plug side |
Connection examples
Műszaki adatok
Approvals
Electrical connection values
| ASI address | 0 |
| ASI operating current | 50 mA |
| ASI data in | |
| according to AS-i Safety at Work | D2 (Guard locking) |
| according to AS-i Safety at Work | D1 (Door position) |
| according to AS-i Safety at Work | D0 (Door position) |
| according to AS-i Safety at Work | D3 (Guard locking) |
| ASI data out | |
| Guard locking solenoid | D0 (1 = Solenoid energized) |
| LED red | D1 (1 = LED on) |
| LED green | D2 (1 = LED on) |
| AS-Interface auxiliary voltage | |
| IEC 60742, PELV | 24 V -15% ... +10% |
| Auxiliary current AS-Interface | 480 mA |
| AS-Interface LED | |
| red | Fault |
| green | Power |
| AS-Interface protocol | ASi-3 |
| AS-Interface slave type | ID-Code: B, EA-Code: 7 |
| ASI voltage | 22.5 ... 30 ... 31.6 V |
| Safety class | |
| EN IEC 61140 | III |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Connection type | |
| 1 x | Plug connector M12 (4-pin) |
| Installation orientation | any |
| Switching frequency | max. 0.5 Hz |
| Degree of freedom X | ±5 mm |
| Degree of freedom Y | ±5 mm |
| Degree of freedom Z | ±4 mm |
| Mechanical life | 2 x 10⁶ |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67 (screwed tight plug connector/mating component) |
| Ambient temperature | |
| with UB = 24 V DC | -20 ... +55 °C |
| Material | |
| Ramp | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N (FZH = FMAX/1.3) |
| Guard locking principle | Open-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Mission time | 20 y |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of guard locking | PL e | - | 3.1x10-9 | 4 | 20 y |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Tartozékok
Function expansion
Mounting accessories
Efficient protection against tampering for safety switch mounting
161344
AM-C-SW4-V3-161344
AM-C-SW4-V3-161344
- Plastic inserts for hexagon socket screws a/f 4
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
161348
AM-C-SW5-V3-161348
AM-C-SW5-V3-161348
- Plastic inserts for hexagon socket screws a/f 5
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Declarations of conformity
EU-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
EU-Konformitätserklärung
Dok. sz.
EDC2110802
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
UKCA-Konformitätserklärung
Dok. sz.
EDC20001474
Változat
Nyelv
Méret
0,1 MB
Instructions
Operating Instructions Transponder-Coded Safety Switch With Guard Locking CET.-AS-… (Unicode/Multicode)
Dok. sz.
Változat
Nyelv
Méret
Operating Instructions Transponder-Coded Safety Switch With Guard Locking CET.-AS-… (Unicode/Multicode)
Dok. sz.
2113689
Változat
05-05/20
Nyelv
Méret
1,6 MB
Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung CET.-AS-… (Uni-/Multicode)
Dok. sz.
2113689
Változat
05-05/20
Nyelv
Méret
1,6 MB
Egyéb dokumentumok
Approvals and certificates
c UL us
Dok. sz.
Változat
Nyelv
Méret
c UL us
Dok. sz.
Változat
Nyelv
Méret
0,3 MB
Sales documents
Interrupteurs de sécurité avec AS-Interface
Dok. sz.
Változat
Nyelv
Méret
Interrupteurs de sécurité avec AS-Interface
Dok. sz.
112564
Változat
12-03/21
Nyelv
Méret
4,9 MB
UQS document
Bescheinigung
Dok. sz.
Változat
Nyelv
Méret
Bescheinigung
Dok. sz.
ECO2113971
Változat
Nyelv
Méret
0,2 MB
Rendelési adatok
| Rend. sz. | 120008 |
| Cikk neve | CET4-AS-CRB-AB-50X-1-120008 |
| Súly | 1,271kg |
| Vámtarifaszám | 85365019000 |
| ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |
