KezdőlapProductsMultifunctional Gate Box MGBMGB-ARMGB-L1HE-ARA-R-121236

MGB-L1HE-ARA-R-121236 (Rend. sz. 121236)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Locking set MGB-L1HE-ARA..., (guard locking by spring force) with 2 pushbuttons, emergency stop

Guard locking with guard lock monitoring
Can be connected in series with other AR devices (e.g. CES-AR and CET-AR)
Emergency stop according to ISO 13850
2 pushbuttons (illuminated)
With lens set, 6 pcs.
With cable entry
With escape release
Unicode

MGB-L1HE-ARA-R-121236 (Rend. sz. 121236)

Ismertetés

Guard locking type

MGB-L1...

The locking arm is held in the locked position by spring force and is unlocked by solenoid force (closed-circuit current principle, mechanically locked).

OD	ON when the door is closed
OT	Bolt tongue inserted into the evaluation module
OL	Guard locking solenoid in locked position
OI	Diagnostics; there is a fault

Installation orientation	Door hinge DIN right
Degree of protection	IP65
Ambient temperature	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Installation orientation	any
Mechanical life	1 x 10⁶
Ambient temperature	-30 ... +55 °C
Material
Housing	Die-cast zinc/stainless steel, powder-coated

Item	Extras	Switching element	Version
1	with monitoring contact	2 PD + 1 NO	Emergency stop
2		1NO	Illuminated pushbutton
3		1NO	Illuminated pushbutton

Connection cross section
(rigid/flexible)	0.13 ... 1.5 mm² ((AWG 24 ... AWG 16))
(rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1	0.25 ... 0.75 mm²
(rigid/flexible) with cable end sleeve according to DIN 46 228/1	0.25 ... 1.5 mm²
Rated insulation voltage U_i	30 V
Rated impulse withstand voltage U_imp	1.5 kV
Discrepancy time
between FO1A and FO1B	max. 10 ms
Utilization category
DC-13	24 V 200 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Risk time according to EN 60947-5-3	max. 350 ms
Risk time according to EN 60947-5-3, extension for each additional device	max. 5 ms
Safety class	III
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Solenoid control input IMP1, IMP2, IMM
Test pulse duration	max. 5 ms
Test pulse interval	min. 100 ms
	Controls and indicators
Breaking capacity	max. 0.25 W
Switching voltage	U_A V
Switching current	1 ... 10 mA
LED power supply	24 V DC
	Emergency stop
Breaking capacity	max. 0.25 W
Switching voltage	5 ... 24 V
Switching current	1 ... 100 mA
LED power supply	24 V DC
	Monitoring outputs OD, OT, OL, OI
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage	UA-2V ... UA V DC (Value at a switching current of 50mA without taking into account the cable lengths)
Output current	max. 50 mA
	Safety outputs FO1A, FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
U_FO1A /U_FO1B LOW	0 ... 1 V DC
U_FO1A /U_FO1B HIGH	UB-2V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths)
Output current
per safety output FO1A / FO1B	1 ... 200 mA
Test pulse duration	max. 1 ms
Test pulse interval	min. 100 ms
	Power supply U_A
Operating voltage DC
U_A	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Current consumption
I_UA	max. 375 mA ((with energized guard locking solenoid and unloaded outputs OD, OT, OL, OI, +20 °C, 24V))
	Power supply U_B
Operating voltage DC
U_B	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Current consumption
I_UB	max. 80 mA ((no load on outputs))

Connection type	Cable entries M20x1.5
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Mechanical life
	1 x 10⁶
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
Degree of protection	IP65
Ambient temperature
at U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic; nickel-plated die-cast zinc; stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Closed-circuit current principle

Mission time	20 y
	Control of guard locking
Category	4
Performance Level	PL e
PFH_D	2.8 x 10^-9
	Emergency stop
B_10D
Emergency stop	0.13 x 10⁶
	Monitoring of guard locking and the guard position
Category	4
Performance Level	PL e
PFH_D	3.7 x 10^-9

Product version number	V4.0.0
Additional feature	incl. lens set, ID no. 120344

Rend. sz.	121236
Cikk neve	MGB-L1HE-ARA-R-121236
Súly	2,858kg
Vámtarifaszám	85371098
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

S2	1 NO contact, illuminated
S3	1 NO contact, illuminated

MGB-L1HE-ARA-R-121236 (Rend. sz. 121236)

Locking set MGB-L1HE-ARA..., (guard locking by spring force) with 2 pushbuttons, emergency stop

Ismertetés

Guard locking type

Door hinge

LED indicator

Monitoring outputs

Emergency stop device

Pushbuttons

Lens set

Escape release

Dimensional drawings

Connection examples

Műszaki adatok

Approvals

Handle modules MGB-H-AA1A1-R-100464 (Order no. 100464)

Mechanical values and environment

Miscellaneous

Escape release MGB-E-A-100465 (Order no. 100465)

Mechanical values and environment

Miscellaneous

Locking modules MGB-L1-ARA-AM3A1-M-R-121234 (Order no. 121234)

Operating and display elements

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Komponensek

Tartozékok

Letöltések

Teljes csomag

Egyedi dokumentumok

Egyéb dokumentumok

CAD-adatok

Rendelési adatok

Cookie-értesítés