RIEGEL CES-AC/F-AP-C01-AH-SB-C2296 (Rend. sz. 124401)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Bolt for safety switch CES-C01

Bolt for switch CES-C01
Steel bolt
For doors hinged on the left or right
Bolt with escape lever
Detent knob in open position
Ball detent mechanism in closed position
Suitable for a door gap of approx. 7 mm
Protective plate for safety switch

RIEGEL CES-AC/F-AP-C01-AH-SB-C2296 (Rend. sz. 124401)

Ismertetés

Scope of delivery

Safety switch CES-AP-C01-AH-SB-111145 pre-assembled

CES actuator integrated in the bolt tongue

Protective plate for safety switch pre-assembled

Latching in open position

Latching in the open position is intended to prevent persons from trapping themselves in a machine from the inside. The bolt slider is latched in the detent position. Unlock by pulling the detent knob upward.

Door types and door hinges

Suitable for hinged or sliding doors.Suitable for doors hinged on the left or right.Without door stop, door can be opened inwards and outwards.

Escape release

Bolts with escape release feature an escape lever enabling the bolt to be opened from inside a guard.

Protective plate

The protective plate protects the switch against damage.

Integrated lockout bar

With the aid of the integrated lockout bar, the bolt can be secured in the open position, e.g. using padlocks. It is possible to prevent people from being locked in the danger area unintentionally.

Dimensional drawings

1	Detent mechanism against accidental opening (vibration)
1)	Bolt with detent mechanism. Engages in open position. (Prevents unintentional closing of the bolt) Unlocked by pulling the detent knob upward.
2	Safety plate
3	Door hinged on the right
4	Door hinged on the left
5	Attention! Bolt without door stop
6	Protective plate mounted on switch bracket.
7	Safety switch mounted on switch bracket.
8	CES actuator pressed into bolt tongue

Műszaki adatok

Mechanical values and environment

Approach direction	A or C
Number of safety switches that can be mounted	1
Escape release	yes
Material
Handle	Plastic
Guide strips	Plastic
Base plate	Galvanized steel
Switch bracket	Steel powder-coated

Miscellaneous

C number
C2296	Gap dimension 7mm
Detent mechanism closed position	Ball detent mechanism
Detent mechanism open position	Bolt detent mechanism

Switch CES-AP-C01-AH-SB-111145 (Order no. 111145)

Workspace

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection values

Fuse
external (operating voltage)	0.25 ... 8 A
Rated insulation voltage U_i	300 V (Tested by the employers’ liability insurance association up to 75 V.)
Rated impulse withstand voltage U_imp	1.5 kV
Operating voltage DC
U_B	24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
Turn-on time
Safety outputs	max. 400 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Current consumption
no load on outputs	max. 50 mA
Degree of contamination (external, according to EN 60947-1)	3
	Safety outputs OA / OB
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
HIGH U(OA,OB)	UB-1.5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
LOW U(OA,OB)	0 ... 1 V DC
rated conditional short-circuit current	max. 100 A
Discrepancy time	max. 10 ms
Utilization category
DC-13	24 V 400 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current Ir	max. 0.25 mA
Switching current
per safety output	1 ... 400 mA
Test pulse duration	max. 0.4 ms

Mechanical values and environment

Connection type	M12 plug connector, 5-pin; pin 5 not used
Tightening torque
Fixing screws	max. 1 Nm
Ready delay	0.5 s
Installation orientation	any
Switching frequency	max. 1 Hz
Mounting distance	min. 40 mm
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP67
Ambient temperature	-20 ... +55 °C
Material
Housing	Plastic, PBT

Miscellaneous

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures

The following applies to the approval according to UL

Operation only with UL Class 2 power supply or equivalent measures

Komponensek

111145
CES-AP-C01-AH-SB-111145
Non-contact safety switch CES-AP-C01-...

Safety switch with integrated evaluation electronics
No series connection
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Category 4 / PL e according to EN ISO 13849-1
M12 plug connector 5-pin; pin 5 not used
Unicode

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 19,8 MB)

Egyedi dokumentumok

Data sheets

Data sheet

Dok. sz.

Változat

Nyelv

Méret

Data sheet
Fiche technique
Ficha de datos
Datenblatt
Ficha de dados
数据表
データシート
데이터 시트
Datový list

Rend. sz.	124401
Cikk neve	RIEGEL CES-AC/F-AP-C01-AH-SB-C2296
Súly	2,15kg
Vámtarifaszám	83014090000

RIEGEL CES-AC/F-AP-C01-AH-SB-C2296 (Rend. sz. 124401)

Bolt for safety switch CES-C01

Ismertetés

Scope of delivery

Latching in open position

Door types and door hinges

Escape release

Protective plate

Integrated lockout bar

Dimensional drawings

Műszaki adatok

Mechanical values and environment

Miscellaneous

Switch CES-AP-C01-AH-SB-111145 (Order no. 111145)

Workspace

Electrical connection values

Mechanical values and environment

Miscellaneous

Komponensek

Letöltések

Teljes csomag

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Cookie-értesítés