KezdőlapProductsMultifunctional Gate Box MGBMGB Ethernet/IP™MGB-L2HB-EIA-R-127677

MGB-L2HB-EIA-R-127677 (Rend. sz. 127677)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Locking set MGB-L2...-EI (guard locking by solenoid force) with 2 pushbuttons, emergency stop

Guard locking with guard lock monitoring
Emergency stop according to ISO 13850, illuminated
2 illuminated pushbuttons
including adhesive labels
Connection via M12 plug
Pre-assembled on mounting plates
Unicode

MGB-L2HB-EIA-R-127677 (Rend. sz. 127677)

Ismertetés

MGB: mounting door on right, without escape release

MGB: mounting door on left, with escape release

MGB: mounting door on left, without escape release

Dimensional drawings

Connection examples

Műszaki adatok

Approvals

Handle modules MGB-H-AA1A6-R-111838 (Order no. 111838)

Mechanical values and environment

Installation orientation	Door hinge DIN right
Degree of protection	IP65
Ambient temperature	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Miscellaneous

Product version number	V3.0.0
Additional feature	with mounting plate and automatic lockout mechanism

Locking modules MGB-L2B-EIA-R-127676 (Order no. 127676)

Workspace

Secured switch-off distance s_ar
Door position	max. 65 mm

Operating and display elements

Occupancy diagram
	L1
	B0

Item	Extras	Switching element	Version
1	with adhesive ring	2 PD	Emergency stop illuminated
2		1NO	Illuminated pushbutton
3		1NO	Illuminated pushbutton

Electrical connection values

Connecting cable
Ethernet	Ethernet/IP cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Mechanical values and environment

Connection type
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X3)
	M12 Power, A-coded (X1)
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X4)
	M12 Power, A-coded (X2)
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Mechanical life
	1 x 10⁶
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
Response time
Guard locking	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Door position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Emergency stop / machine stop	max. 100 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Mission time	20 y
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Control of guard locking
Category	4
Performance Level	PL e
PFH_D	4.91 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Emergency stop
B_10D
Emergency stop	0.13 x 10⁶
	Emergency-stop evaluation
Category	4
Performance Level	PL e
PFH_D	3.05 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Monitoring of guard locking and the guard position
Diagnostic Coverage (DC)	99 %
Category	4
Performance Level	PL e
PFH_D	3.37 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)

Miscellaneous

Slide-in label

Number	Labeling	Note
2		without marking

Product version number

V1.5

Additional feature

incl. lens set, ID no. 120344

Interface

Bus data protocol	Ethernet/IP
Safety data protocol	CIP Safety
Date interface
Ethernet

Komponensek

111838
MGB-H-AA1A6-R-111838
Handle module MGB-H... with automatically extending lockout mechanism

Intelligent bolt tongue
Fold-out lockout mechanism
Second automatically extending lockout mechanism
Door handle
Mounting plate

127676
MGB-L2B-EIA-R-127676
Locking module MGB-L2...-EI (guard locking by solenoid force) with 2 pushbuttons, emergency stop

Guard locking with guard lock monitoring
Emergency stop according to ISO 13850, illuminated
2 illuminated pushbuttons
including adhesive labels
Connection via M12 plug
Pre-assembled on mounting plates
Unicode

Tartozékok

Function expansion

Door handle for MGB-H...

123926
MGB-A-DOORHANDLE-S2-123926

Aluminum, silver anodized
for mounting on all MGB handle modules MGB-H from V3.0.0

Door knob for MGB-H...

124030
MGB-A-DOORKNOB-S2-124030

Aluminum, silver anodized
for mounting on all MGB handle modules MGB-H... from V3.0.0
e.g. on sliding doors

Emergency release for safety system MGB

112989
MGB-A-EMERGENCYRELEASE-112989

Quick emergency release
sealable

Escape release module MGB-E... pre-assembled on mounting plate

106051
MGB-E-A2-106051

Escape release from the danger zone
Mounted on mounting plate
Signal red door handle
Designed for door profiles up to 40 mm
Extended actuation axis for thicker doors (available optionally)

MGB-EI

Locking module MGB-L2...-EI (guard locking by solenoid force) with 2 pushbuttons, emergency stop

127676
MGB-L2B-EIA-R-127676

Guard locking with guard lock monitoring
Emergency stop according to ISO 13850, illuminated
2 illuminated pushbuttons
including adhesive labels
Connection via M12 plug
Pre-assembled on mounting plates
Unicode

Miscellaneous

Adhesive labels

114529
MGB-A-PLATESET-NN01-114529

Adhesive labels suitable for MGB evaluation modules, bus modules and control modules
silver, blank
Packaging unit = 10 pcs.

Lens set labeled

120377
AY-SET-LNS-SY01-120377

126158
AY-SET-LNS-SY03-126158

125359
AY-SET-LNS-SY02-125359

158307
AY-SET-LNS-SY04-158307

160049
AY-SET-LNS-SY05-160049

Lens set, 5 colors

120344
AY-SET-LNS-0001-120344

163284
AY-SET-LNS-0003-163284

Lens set, 6 colors

120378
AY-SET-LNS-0002-120378

Spare parts

Handle module MGB-H... with automatically extending lockout mechanism

111838
MGB-H-AA1A6-R-111838

Intelligent bolt tongue
Fold-out lockout mechanism
Second automatically extending lockout mechanism
Door handle
Mounting plate

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 11,2 MB)