MGB-L1B-EIA-R-136468 (Rend. sz. 136468)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Locking module MGB-L1...-EI (Guard locking by spring force) with 4 pushbuttons, EMERGENCY STOP, 7/8" and M12 plug

Rated operating distances S_n	20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Rated operating distances S_n

20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Connecting cable
Ethernet	Ethernet/IP cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Connection type
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X3)
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X4)
	7/8" Power (X1)
	7/8" Power (X2)
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Mechanical life
	1 x 10⁶
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
Response time
Bolt position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Emergency stop / machine stop	max. 100 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Guard locking	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Door position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Closed-circuit current principle

Mission time	20 y
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Control of guard locking
Category	4
Performance Level	PL e
PFH_D	4.91 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Emergency stop
B_10D
Emergency stop	0.13 x 10⁶
	Emergency-stop evaluation
Category	4
Performance Level	PL e
PFH_D	3.05 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Monitoring of guard locking and the guard position
Diagnostic Coverage (DC)	99 %
Category	4
Performance Level	PL e
PFH_D	3.37 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)

Slide-in label

Number	Labeling	Note
4		without marking

Product version number

V1.5

Additional feature

incl. lens set, ID no. 120344

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat