KezdőlapProductsSafety engineering for connection to IO-LinkBP/BR safety switch with guard locking control via IO-LinkCTA-L2-BR-U-HA-APD-SA-166660

CTA-L2-BR-U-HA-APD-SA-166660 (Rend. sz. 166660)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Transponder-coded safety switch CTA-BR, M12

Safety switch with guard locking and integrated evaluation electronics
Series connection possible
Control of guard locking via IO-Link communication
Guard locking suitable for process protection only
Communication functions in combination with an IO-Link Gateway GWY-CB or ESM-CB
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Open-circuit current principle
Up to category 4 / PL e according to EN ISO 13849-1
With plug connector M12
Unicode
Door monitoring output
Approach directions A, B and C (delivery state)

CTA-L2-BR-U-HA-APD-SA-166660 (Rend. sz. 166660)

Ismertetés

Approach direction

Horizontal

Can be adjusted in 90° steps

Unicode evaluation

Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.

Activating guard locking:	Guard locking powered by the device’s operating voltage and controlled by bit CL (bit CL = 1).
Releasing guard locking:	Guard locking released by spring force and deactivated by bit CL (bit CL = 0).

Pin	Designation	Function	Connecting cable conductor coloring
1	FI1B	Enable input, channel B	WH
2	UB	Electronics and solenoid operating voltage, 24 V DC	BN
3	FO1A	Safety output, channel A	GN
4	FO1B	Safety output, channel B	YE
5	OD/C	Door position monitoring output/communication	GY
6	FI1A	Enable input, channel A	PK
7	0 V	Electronics and solenoid operating voltage, 0 V DC	BU
8	UA*	Solenoid auxiliary voltage, 24 V DC, * connected internally to UB	RD

1	Auxiliary release
2	Locking screw
3	LEDs
4	Plug connector aligned

Fuse
external (operating voltage UB)	0.25 ... 8 A
external (solenoid operating voltage IMP)	0.5 ... 8 A
Power consumption	6 W
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Operating voltage DC
U_UB	24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
EMC protection requirements	Acc. to EN IEC 60947-5-3
Utilization category
DC-13	24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Solenoid operating voltage DC
U_IMP	24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV
Solenoid duty cycle	100 %
Risk time according to EN 60947-5-3	max. 270 ms
Risk time according to EN 60947-5-3, extension for each additional device	max. 5 ms
Switching load
according to UL	24V DC, Class 2
Safety class
EN IEC 61140
Current consumption
I_UB	40 mA
I_IMP	400 mA
Test pulse duration	max. 0.3 ms
Test pulse interval	min. ca 100 ms
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD/C
Output type	p-switching, short circuit-proof
Output voltage	0.8xUB ... UB V DC
Switching current	1 ... 50 mA
	Safety outputs FO1A / FO1B
Output type	2 semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
HIGH U(FO1A) / U(FO1B)	UB-1.5 ... UB V DC
Discrepancy time
both safety outputs	max. 10 ms Acc. to EN IEC 60947-5-3
Turn-on time	max. 150 ms
Off-state current Ir	max. 0.25 mA
Switching current
per safety output FO1A / FO1B	1 ... 150 mA

Approach speed	max. 20 m/min
Connection type	1 plug connectors M12, 8-pin
Extraction force	20 N
Ready delay	5 s
Actuating force	10 N
Switching frequency	max. 0.5 Hz
Mechanical life	1 x 10⁶
Overtravel	5 mm
Retention force	20 N
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67/IP69/IP69K (screwed tight plug connector/mating component)
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Switch head cover	Die-cast zinc
Safety switch housing	Die-cast zinc
Locking force F_max	8000 N
Locking force F_Zh	4000 N

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures; see operating instructions
Additional feature
	with blind flange
	Retrofit for escape release possible

Rend. sz.	166660
Cikk neve	CTA-L2-BR-U-HA-APD-SA-166660
Súly	1,1kg
Vámtarifaszám	85365019
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

Repeat accuracy R
according to EN 60947-5-2	10 %

CTA-L2-BR-U-HA-APD-SA-166660 (Rend. sz. 166660)

Transponder-coded safety switch CTA-BR, M12

Ismertetés

Approach direction

Unicode evaluation

Control of guard locking via IO-Link communication

Connector assignment

Dimensional drawings

Connection examples

Műszaki adatok

Approvals

Workspace

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Tartozékok

Letöltések

Teljes csomag

Egyedi dokumentumok

Egyéb dokumentumok

CAD-adatok

Rendelési adatok

Cookie-értesítés