ZSM, LED, + and - buttons, vibration motor
- 3-stage function
- Vibration signal
- LED indicator
- + and – buttons
- Straight connecting cable, 5 m
Ismertetés
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Vibration signal
The vibration signal is used for tactile feedback of the enabling position.
LED indicator
The LED indicator is used for visual feedback directly at the enabling switch.
+ and – buttons
These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.
Cable
The high-quality connecting cables are available in a straight version.
Dimensional drawings
Connection examples
Connection examples
Connection examples
Műszaki adatok
Approvals
Operating and display elements
Item | Color | Extras | Slide-in label | Version | Switching element | Note slide-in label | Number | Designation1 | LED |
---|---|---|---|---|---|---|---|---|---|
Vibration motor | 1 | ||||||||
+ button | 1 | ||||||||
- button | 1 | ||||||||
Yellow | LED | 1 |
Electrical connection values
Connecting cable | 12x0.14 mm² (screened) |
rated conditional short-circuit current | 100 A |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 0.5 kV |
Utilization category | |
DC-13 | 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
DC-13 | 24 V 0.3 A (For additional controls) |
DC-13 | 24 V 0.01 A (For additional indicators) |
Short circuit protection according to IEC 60269-1 | 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.) |
Switching characteristics | 3-stage enabling switch |
Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
Connection type | flying lead |
Number of changeover contacts | 3 (Connection as per block diagram) |
Cable length | |
straight | 5 m |
Mechanical life | 1 x 10⁶ |
Switching principle | Snap-action contact element |
Degree of protection | IP54 |
Ambient temperature | -5 ... +60 °C |
Material | PA, CR, TPE (Low PAH) |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
Enabling switch | |
B10D | 0.1 x 10⁶ |
Miscellaneous
in compliance with | 60947-5-8 |
Tartozékok
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Mode d’emploi Commande d’assentiment ZSM
Manual de instrucciones Pulsador de validación ZSM
Betriebsanleitung Zustimmtaster ZSM
Egyéb dokumentumok
Rendelési adatok
Rend. sz. | 099714 |
Cikk neve | ZSM2100-099714 |
Súly | 0,719kg |
GTIN | 4047048005723 |
Vámtarifaszám | 85371098 |
ECLASS | 27-37-12-38 Agreement switch |