KezdőlapProductsIdentification systemsCIS3A-MiniCIA3PL1G08

CIA3PL1G08 (Rend. sz. 091875)

Read-only interface adapter CIA3PL1G08

  • Parallel interface
  • In combination with read head CIT3ASX1N12ST
  • Rail mounting
CIA3PL1G08 (Rend. sz. 091875)

Ismertetés

Attention:

  • The connecting cable to the control system is allowed to be max. 15 m long.
  • On the use of a screened cable the connecting cable to the read head is allowed to be max. 15 m long.
  • It is only ever possible to connect 1 read head per interface adapter.
Dimension drawing
Dimension drawing
Wiring diagram read head
Wiring diagram read head
Wiring diagram power supply and interface
Wiring diagram power supply and interface

Dimensional drawings

Dimensional drawings
1Suitable for 35 mm mounting rail according to DIN 46277

Connection examples

Connection examples

Connection examples

Connection examples

Műszaki adatok

Operating and display elements

LED display
yellow ACTIVE LED data carrier active
green STATE LED operational

Electrical connection values

Connection cross section 0.14 ... 2.5 mm²
Output type Push-pull
Operating voltage DC 20 ... 24 ... 28 V DC (All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.))
Input voltage
0 ... 2 V DC Low signal (Reset,Skip)
15 ... Ub V DC High signal (Reset,Skip)
Switching voltage
Ub-3 ... Ub V (High signal (A,B,C,D,Strobe))
0 ... 2 V (Low signal (A,B,C,D,Strobe))
Switching current
per output -30 ... +30 mA
Current consumption
without load 65 ... 100 mA
Resistance 4.5 kΩ For inputs (Reset,Skip)

Mechanical values and environment

Connection type plug-in screw terminal
Number of read heads max. 1
Storage temperature -25 ... 70 °C
Mounting type Mounting rail TH 35 (EN IEC 60715)
Ambient temperature 0 ... 55 °C
Material
Housing PA6.6, gray

Interface

Date interface 4-bit binary coded + strobe

In combination with read head CIT3ASX1N12ST and actuator CIS3AP10D05KH01K, CIS3AP10D05KH01K-P

Read distance
0 ... 3 ... 5 mm (for surface mounting of the read head and flush mounting of the data carrier in aluminum)
0 ... 3 ... 6 mm (for surface mounting of the read head and flush mounting of the data carrier in ferrous metals)
0 ... 3 ... 6.5 mm (for surface mounting of the read head and flush mounting of the data carrier in a non-metallic environment)
Center offset
at s = 3 mm read distance -2,5 ... 2,5 mm (for surface mounting of the read head and flush mounting of the data carrier in a non-metallic environment)

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 0,8 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 091875
Cikk neve CIA3PL1G08
Súly 0,21kg
Vámtarifaszám 85364110
ECLASS 27-28-04-01 Identification, RFID Reader