KezdőlapProductsMultifunctional Gate Box MGBMGB Ethernet/IP™MGB-L0B-EIA-R-136553

MGB-L0B-EIA-R-136553 (Rend. sz. 136553)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Interlocking module MGB-L0...-EI with 2 pushbuttons, emergency stop

Interlocking (without guard locking)
Emergency stop according to ISO 13850, illuminated
2 illuminated pushbuttons
including adhesive labels
Connection via M12 plug
Pre-assembled on mounting plates
Unicode

Ismertetés

MGB: mounting door on right, without escape release

MGB: mounting door on left, with escape release

MGB: mounting door on left, without escape release

Dimensional drawings

Connection examples

Műszaki adatok

Approvals

TUEV Süd München_M6A 040393 0042 Rev. 00

Workspace

Rated operating distances S_n	20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Rated operating distances S_n

20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Operating and display elements

Occupancy diagram
	B0
	L1

Item	Extras	Version	Switching element
1	with adhesive ring	Emergency stop illuminated	2 PD
2		Illuminated pushbutton	1NO
3		Illuminated pushbutton	1NO

Electrical connection values

Connecting cable
Ethernet	Ethernet/IP cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Mechanical values and environment

Connection type
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X4)
Ethernet/IP cable, at least cat. 5e	M12, D-coded, screened (X3)
	M12 Power, A-coded (X2)
	M12 Power, A-coded (X1)
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Mechanical life
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
	1 x 10⁶
Response time
Door position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Emergency stop / machine stop	max. 100 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Mission time	20 y
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Emergency stop
B_10D
Emergency stop	0.13 x 10⁶
	Emergency-stop evaluation
Category	4
Performance Level	PL e
PFH_D	3.05 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)
	Monitoring of the guard position
Diagnostic Coverage (DC)	99 %
Category	4
Performance Level	PL e
PFH_D	3.37 x 10^-9 (Fixed failure rate without consideration of faults in wearing parts.)

Miscellaneous

Slide-in label

Number	Labeling	Note
2		without marking

Product version number

V1.5

Additional feature

incl. lens set, ID no. 120344

Interface

Bus data protocol	Ethernet/IP
Safety data protocol	CIP Safety
Date interface
Ethernet

Tartozékok

Miscellaneous

Adhesive labels

114529
MGB-A-PLATESET-NN01-114529

Adhesive labels suitable for MGB evaluation modules, bus modules and control modules
silver, blank
Packaging unit = 10 pcs.

Lens set labeled

120377
AY-SET-LNS-SY01-120377

126158
AY-SET-LNS-SY03-126158

125359
AY-SET-LNS-SY02-125359

158307
AY-SET-LNS-SY04-158307

160049
AY-SET-LNS-SY05-160049

Lens set, 5 colors

120344
AY-SET-LNS-0001-120344

163284
AY-SET-LNS-0003-163284

Lens set, 6 colors

120378
AY-SET-LNS-0002-120378

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 11,2 MB)