KezdőlapProductsMultifunctional Gate Box MGBMGB-PNMGB-L0B-PNA-R-113614

MGB-L0B-PNA-R-113614 (Rend. sz. 113614)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Interlocking module and bus module MGB-L0...-PN with 4 control elements, 7/8" and M12 plugs

Interlocking (without guard locking)
With key-operated rotary switch (form V, 90°)
2 illuminated white pushbuttons with symbol
Operating mode selector
Connection via 7/8" and M12 plugs
Pre-assembled on mounting plates
Integrated Profinet RT switch
Unicode

Ismertetés

Profinet connection

7/8" plugs according to ANSI/B93.55M-1981 and M12 plugs (d-coded) according to IEC 61076-2-101

Profinet RT switch

Point-to-point topology network structure due to integrated RT switch.

Dimensional drawings

Műszaki adatok

Approvals

TUEV Süd München_M6A 040393 0042 Rev. 00

Workspace

Rated operating distances S_n	20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Rated operating distances S_n

20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Operating and display elements

Occupancy diagram
	B4
	L1

Item	Color	Extras	Slide-in label	Version	Switching element
1				Key-operated rotary switch	1NO
90	white	printed		Illuminated pushbutton	1NO
91			O ; I	Operating mode selector	Code 2 of 3
92	white	printed		Illuminated pushbutton	1NO

Electrical connection values

Connecting cable
Ethernet	Profinet I/O cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Unicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Mechanical values and environment

Connection type
	7/8" Power (X2 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
	7/8" Power (X1 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
according to IEC 61076-2-101, Profinet I/O cable, at least cat. 5e	M12, D-coded, screened (X4 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
according to IEC 61076-2-101, Profinet I/O cable, at least cat. 5e	M12, D-coded, screened (X3 (The PROFINET 'Cabling and Interconnection Technology' document from the PNO helps with the correct selection of cables).)
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Mechanical life
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
	1 x 10⁶
Response time
Door position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Operating mode selector	max. 220 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
with U_B = 24 V DC	-20 ... +55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	3	4.07x10^-8	4	20 y
Safe multi-position switch	PL e	3	4.1x10^-8	4	20 y

Miscellaneous

Product version number	V3.30.10

Product version number

V3.30.10

Interface

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet

Tartozékok

Miscellaneous

Adhesive labels

114529
MGB-A-PLATESET-NN01-114529

Adhesive labels suitable for MGB evaluation modules, bus modules and control modules
silver, blank
Packaging unit = 10 pcs.

Lens set labeled

120377
AY-SET-LNS-SY01-120377

126158
AY-SET-LNS-SY03-126158

125359
AY-SET-LNS-SY02-125359

158307
AY-SET-LNS-SY04-158307

160049
AY-SET-LNS-SY05-160049

Lens set, 5 colors

120344
AY-SET-LNS-0001-120344

163284
AY-SET-LNS-0003-163284

Lens set, 6 colors

120378
AY-SET-LNS-0002-120378

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 6,2 MB)