KezdőlapProductsPosition switches and multiple limit switchesMultiple limit switch, upright SNSN06R12-502AM-M

SN06R12-502AM-M (Rend. sz. 088766)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Series SN...AM, 12 mm, mechanical, with exterior diaphragm

With exterior diaphragm
Plunger spacing 12 mm
Upright housing, small flange
Degree of protection IP67 according to IEC 60529

Ismertetés

Exterior diaphragm

The exterior diaphragm protects the plunger guide against the entry of very fine dust (dust from grinding, casting, glass, etc.) and prevents the plunger from seizing. At the same time, plunger sticking, caused by resinous lubricating coolants, can be prevented with this exterior diaphragm version.

Switching element

ES 502 E

Snap-action switching contact 1 NC + 1 NO

Dimensional drawings

1	Operating point
2	Free position
3	Dog
4	n Number of plungers

Connection examples

Műszaki adatok

Approvals

Electrical connection values

Connection cross section	0.34 ... 1.5 mm²
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	2.5 kV
Utilization category
AC-15	6 A 230 V
AC-12	8 A 250 V
DC-13	6 A 24 V
Short circuit protection according to IEC 60269-1	8A gG
Switching current
min. at DC 12V	min. 10 mA
thermal rated current I_th	8 A

Mechanical values and environment

Approach speed	0.01 ... 50 m/min
Connection type
2 x	M20 x 1.5
Number NC contacts	6
Number of switching elements	6
Number of NO contacts	6
Design	upright
Actuating element
Slide bearing	Roller plunger (d roller = 5. Operating point accuracy ± 0.01. The reproducible operating point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2,000 operating cycles.)
Actuating force	min. 20 N
Installation orientation	any
Mechanical life	30 x 10⁶
Switching principle	Snap-action switching contact (Contact closing time<4 ms contact bounce time<3 ms)
Degree of protection	IP67
Plunger spacing	12 mm
Ambient temperature	-5 ... +80 °C
Material
Contact	Silver alloy, gold flashed
Housing	Die-cast aluminum, anodized

Miscellaneous

Additional feature	(Exterior diaphragm = AM. The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)

Additional feature

(Exterior diaphragm = AM. The exterior diaphragm provides additional protection for the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this AM version.)

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 1,8 MB)