KezdőlapProductsSafety engineering with AS‑InterfaceTransponder-coded safety switches with AS-InterfaceCES-I-AS2A-M-C04-SC-120546

CES-I-AS2A-M-C04-SC-120546 (Rend. sz. 120546)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Safety switch CES-.-AS-C04 with AS-i connection, plug connector M8

Very compact design with 3 active faces
Integrated diagnostic LEDs
Category 4 / PL e according to EN ISO 13849-1
Plug connector M8, 3-pin
Multicode

CES-I-AS2A-M-C04-SC-120546 (Rend. sz. 120546)

Ismertetés

Installation position

Permissible installation position

Multicode evaluation

Every suitable actuator is detected by the switch.

AS-Interface inputs

D0, D1, D2, D3

Door monitoring

Evaluation is performed via a safety monitor.

LED function display

The STATE LED indicates the state of the switch.

The DIA LED indicates whether a fault has been detected in the switch.

The dual LED on the M8 plug connector indicates the state of the ASi bus.

Dimensional drawings

1	Active face
2	ASi green/red
3	LED status indication
4	Rubber support

Connection examples

PIN 1	AS-i +
PIN 3	AS-i -
PIN 4	n.c.

Connection examples

Műszaki adatok

Approvals

Workspace

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection values

ASI operating current	max. 50 mA
ASI data in
according to AS-i Safety at Work	D1 (Door position)
according to AS-i Safety at Work	D0 (Door position)
according to AS-i Safety at Work	D3 (Door position)
according to AS-i Safety at Work	D2 (Door position)
AS-Interface protocol	ASi-3
AS-Interface slave type	ID-Code: B, EA-Code: 0
ASI voltage	19 ... 31.6 V
Rated insulation voltage U_i	300 V
Rated impulse withstand voltage U_imp	1.5 kV
Turn-on time
Safety outputs	max. 300 ms
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Dimensions	42 x 25 x 18
Connection type	M8 plug connector, 3-pin
Tightening torque
Plug connector	max. 0.3 Nm
Fixing screws	max. 0.8 Nm
Installation orientation	any
Switching frequency	max. 1 Hz
Mounting distance
between switches	min. 80 mm
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP67
Ambient temperature	-25 ... +65 °C
Material
Rubber support	NBR 80 ±5 Shore
Housing	Plastic, PBT

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Mission time	20 y
	Monitoring of the guard position
Category	4
Performance Level	PL e
PFH_D	4.5 x 10^-9

Miscellaneous

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures

The following applies to the approval according to UL

Operation only with UL Class 2 power supply or equivalent measures

In combination with actuator CES-A-BDN-06-104730, CES-A-BBN-C04-115271

Secured switch-off distance s_ar
in x/z direction	max. 40 mm
in y direction	max. 60 mm
Switching hysteresis	1 ... 2 mm

In combination with actuator CES-A-BBN-161502

Switch-on distance
Installation position A + B	30 mm
Installation position C + D	25 mm
Secured switch-off distance s_ar
in x-/z direction / installation position C + D	max. 63 mm
in y direction / installation position C + D	max. 72 mm
in x/z direction / installation position A + B	max. 69 mm
in y direction / installation position A + B	max. 77 mm
Secured switching distance s_ao
Installation position A + B	15 mm
Installation position C + D	10 mm
Switching hysteresis	min. 1 mm

In combination with actuator CES-A-BBN-C04-115271

Switch-on distance
Approach direction A or B (front side)	15 mm
Approach direction C or D (broad side)	11 mm
Secured switching distance s_ao
Approach direction A or B (front side)	10 mm
Approach direction C or D (broad side)	6 mm

In combination with actuator CES-A-BDN-06-104730

Switch-on distance
Approach direction C or D (broad side)	15 mm
Approach direction A or B (front side)	19 mm
Secured switching distance s_ao
Approach direction C or D (broad side)	min. 10 mm
Approach direction A or B (front side)	min. 14 mm

Tartozékok

Actuator

Actuator CES-A-BBN-C04

115271
CES-A-BBN-C04-115271

Cube-shaped design 42 x 25 mm
Two safety screws M4x20 and rubber support included

161502
CES-A-BBN-161502

Cube-shaped design 42 x 25 mm, height 12 mm
Transponder with large actuating range
Mounting compatible with actuators: CES-A-BBA-071840, CES-BBN-106600, CES-A-BBN-C04-115271
Two safety screws M4x14 included

Actuator CES-A-BDN-06

104730
CES-A-BDN-06-104730

Cylindrical design, Ø 6x26 mm
Transponder coded, high coding level

161742
CES-A-BDN-06-161742

Cylindrical design, Ø 6x38 mm
Transponder coded, high coding level
Large actuating range

Connection material

Bus coupling module with plug connector M12, 5-pin

105756
BCM-A-P2-SEM4-1

Conversion from M12 to ribbon cable
Very compact design
Easy handling

Connecting cable with plug connectors M12, 3-pin, and M8, 3-pin, at both ends, 1 m

111600
C-M12M03-03X034PU01,0-M08F03-111600

M12 male plug, 3-pin
M8 female plug, 3-pin
Straight plug connector
PUR cable
Cable length 1 m

Metal bolt

Bolt for safety switch CES-C04

121646
BTC-CES04-S-TH-20-X-121646

Bolt for switch CES-C04
Aluminum bolt
For doors hinged on the left or right
Spring catch in closed position
Suitable for a door gap of approx. 7 mm
Protective bracket for safety switch

Bolt with escape release, for safety switch CES-C04

123583
BTC-CES04-S-TH-21-F-123583

Bolt for switch CES-C04
Aluminum bolt
For doors hinged on the left or right
Bolt with escape lever
Detent knob in open position
Spring catch in closed position
Suitable for a door gap of approx. 7 mm
Protective bracket for safety switch

Mounting accessories

Safety screws M4 x 20

116978
M4X20-NIRO/V20

Safety screws M4 x 20
Packaging unit 20 pieces

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 2,4 MB)