KezdőlapProductsSafety engineering with AS‑InterfaceTransponder-coded safety switches with AS-InterfaceCTP-I2-AS2B-U-HA-AZC-SJ-166889

CTP-I2-AS2B-U-HA-AZC-SJ-166889 (Rend. sz. 166889)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Safety switch CTP-I2-AS – with AS-i connection, plug connector M12 (open-circuit current principle)

Safety switch with guard locking and integrated evaluation electronics
Locking force up to 3,900 N
Category 4 / PL e according to EN ISO 13849-1
Unicode
Approach directions A, B and C (delivery state)

CTP-I2-AS2B-U-HA-AZC-SJ-166889 (Rend. sz. 166889)

Ismertetés

Approach direction

Horizontal

Can be adjusted in 90° steps

Guard locking type

CTP‑I2

Guard locking actuated by power-ON and released by spring force (open-circuit current principle).

Control of the guard locking solenoid

The guard locking solenoid can be controlled via AS-Interface bus bit D0 or via the auxiliary power.

AS-Interface inputs

D0, D1	Door monitoring
D2, D3	Guard lock monitoring

Evaluation is performed via a safety monitor.

AS-Interface outputs

D0	Guard locking

LED function display

The ASI LED indicates the state of the ASi bus.

The STATE LED indicates the state of the switch.

The LOCK/DIA LED indicates if the door is locked and whether a fault has been detected in the switch.

Dimensional drawings

1	Auxiliary release
2	Locking screw
3	LEDs
4	Plug connector not aligned

Connection examples

View of plug side

Connection examples

Műszaki adatok

Approvals

Workspace

Repeat accuracy R
according to EN 60947-5-2	10 %

Electrical connection values

ASI operating current	50 mA
ASI data in
according to AS-i Safety at Work	D1 (Door position)
according to AS-i Safety at Work	D0 (Door position)
according to AS-i Safety at Work	D2 (Guard locking)
according to AS-i Safety at Work	D3 (Guard locking)
ASI data out
Guard locking solenoid	D0 (1 = Solenoid energized)
AS-Interface auxiliary voltage
IEC 60742, PELV	24 V -15% ... +10%
Auxiliary current AS-Interface	400 mA
AS-Interface protocol	ASi-3
AS-Interface slave type	ID-Code: B, EA-Code: 7
ASI voltage	26.5 ... 30 ... 31.6 V
Safety class	III

Mechanical values and environment

Approach speed	max. 20 m/min
Connection type	1 plug connector M12, 4-pin
Extraction force	20 N
Ready delay	max. 1 s
Actuating force	10 N
Installation orientation	any
Switching frequency	max. 0.5 Hz
Mechanical life	1 x 10⁶
Overtravel	5 mm
Retention force	20 N
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP67/IP69/IP69K (screwed tight plug connector/mating component)
Ambient temperature	-20 ... +55 °C
Material
Safety switch housing	Reinforced thermoplastic
Switch head cover	Die-cast zinc
Locking force F_max	3900 N
Locking force F_Zh	3000 N (Fzh = Fmax/1.3, depending on the actuator used)
Guard locking principle	Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	-	4.1x10^-9	4	20 y

Miscellaneous

The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

The following applies to the approval according to UL

Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Tartozékok

Actuator

Bent actuator for safety switch CTP/CTA

122667
A-C-H-W-SST-122667

Actuator bent at top
Two safety screws included

122668
A-C-H-W-SST-122668

Bent actuator, bottom
Two safety screws included

Hinged actuator for safety switch CTP/CTA

122671
A-C-H-RL-LS-122671

Hinged actuator for doors hinged on the left
Two safety screws included

122672
A-C-H-RR-LS-122672

Hinged actuator for doors hinged on the right
Two safety screws included

122675
A-C-H-RO-LS-122675

Hinged actuator for top-hinged doors
Two safety screws included

122676
A-C-H-RU-LS-122676

Hinged actuator for bottom-hinged doors
Two safety screws included

Straight actuator for safety switch CTP/CTA

126015
A-C-H-G-SST-126015

Straight actuator
Two safety screws included

Connection material

Bus coupling module with plug connector M12, 5-pin

105756
BCM-A-P2-SEM4-1

Conversion from M12 to ribbon cable
Very compact design
Easy handling

Function expansion

Emergency release for safety switch CTP/CTA/TP/STP/MGB2

099877
AE-M-A1-99877

Handle for wire front release (bowden)

099795
AY-HDL-099795

suitable for all wire front releases

124204
AY-HDL-124204

suitable for all wire front releases

Lock for auxiliary release for safety switch CTP/CTA/TP/STP

084177
AE-K-A1-DULK1-84177

Lock unique locking
Key removable in “unlocked” and “locked” positions

086236
AE-K-A1-IULK1-86236

Identical locking
Key removable in “unlocked” and “locked” positions

109212
AE-K-A1-IUK2-109212

Identical locking
Key can be removed only in “unlocked” position

121917
AE-K-A1-ILK1-121917

Identical locking
Key removable in “locked” position

Lockout bar CTP/CTA

123411
AE-L-C-H-123411

Prevents unintentional closing of the door
Can be secured with padlocks

Release with automatic reset for safety switch CTP/CTA/TP/STP/MGB2/MGBS

103110
AE-R-A1-103110

Wire front release (bowden)

096230
AE-B-A1-02,0-096230

Can be used as escape release or emergency release
no automatic return
Sheath length 2 m (rope length 6 m)

097747
AE-B-A1-02,0-F-097747

Can be used as escape release or emergency release
automatic return
Sheath length 2 m (rope length 6 m)

098313
AE-B-A1-03,0-098313

Can be used as escape release or emergency release
no automatic return
Sheath length 3 m (rope length 6 m)

098314
AE-B-A1-04,0-098314

Can be used as escape release or emergency release
no automatic return
Sheath length 4 m (rope length 6 m)

111233
AE-B-A1-03,0-F-111233

Can be used as escape release or emergency release
automatic return
Sheath length 3 m (rope length 6 m)

125582
AE-B-A1-06,0-125582

Can be used as escape release or emergency release
no automatic return
Rope length 6 m (without sheath)

124770
AE-B-A1-06,0-F-124770

Can be used as escape release or emergency release
automatic return
Rope length 6 m (without sheath)

Metal bolt

Bolt BTC-CTP-S for safety switches CTP, CTA

123659
BTC-CTP-S-TH-00-X

Aluminum bolt
For doors hinged on the left or right
Can be locked in open position with padlocks
Actuator included

Bolt BTM-UNIP-S... for safety switches TP, STP, STA, CTP and CTA

159951
BTM-UNIP-S-TH-00-X-159951

Steel bolt
For doors hinged on the left or right
Can be locked in open position with padlocks
Actuator not included

Bolt for safety switch CTP, CTA

123653
RIEGEL CTP-AC-123653

Steel bolt
For doors hinged on the right and left
Can be locked in open position with padlocks
Actuator included

137354
RIEGEL CTP-AC-C2308-137354

Steel bolt
For doors hinged on the right and left
Can be locked in open position with padlocks
Actuator included
Bolt without door stop, suitable for swing doors

Mounting accessories

Efficient protection against tampering for safety switch mounting

161344
AM-C-SW4-V3-161344

Plastic inserts for hexagon socket screws a/f 4
Efficient protection against tampering for safety switch mounting
The packaging includes inserts for 18 screws

161348
AM-C-SW5-V3-161348

Plastic inserts for hexagon socket screws a/f 5
Efficient protection against tampering for safety switch mounting
The packaging includes inserts for 18 screws

Mounting plates AM-P for safety switch CTP/CTA

126026
AM-P-126026

For vertical and horizontal mounting of safety switch CTP/CTA

Plastic bolt

Bolt CTP-GFK for safety switch CTP

123657
RIEGEL CTP-GFK

Fiber glass reinforced plastic bolt
For doors hinged on the left or right
Can be locked in open position with padlocks
Actuator included

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 3,7 MB)

Egyedi dokumentumok

Declarations of conformity

EU-Konformitätserklärung

Dok. sz.

Változat

Nyelv

Méret

EU-Konformitätserklärung

UKCA-Konformitätserklärung

Dok. sz.

Változat

Nyelv

Méret

UKCA-Konformitätserklärung

Instructions

Operating Instructions Transponder-Coded Safety Switch with Guard Locking for Process Protection CTP-I.-AS Unicode/Multicode

Dok. sz.

Változat

Nyelv

Méret

Operating Instructions Transponder-Coded Safety Switch with Guard Locking for Process Protection CTP-I.-AS Unicode/Multicode

Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung für den Prozessschutz CTP-I.-AS Uni-/Multicode

Safety information

Dok. sz.

Változat

Nyelv

Méret

Safety information
Information de sécurité
Información de seguridad
Sicherheitsinformation
Informação de segurança
Informazioni sulla sicurezza
Bezpečnostní informace
Biztonsági információ
Информация за безопасност
Sikkerhedsinformation
Ohutusalane teave
Turvallisuustiedot
Πληροφορία ασφαλείας
Sigurnosne informacije
Informācija par drošību
Saugos informacija
Veiligheidsinformatie
Sikkerhetsinformasjon
Informacje o bezpieczeństwie
Säkerhetsinformation
Varnostne informacije
Bezpečnostné informácie
Güvenlik bilgisi
Informații privind siguranța

Egyéb dokumentumok

Approvals and certificates

Approval

Dok. sz.

Változat

Nyelv

Méret

Approval
Homologation
Homologación
EAC
Homologação
Omologazione
认证
認可
승인
Сертификат
Atest
Engedély
Разрешително
Godkendelse
Heakskiit
Hyväksyntä
Έγκριση
Odobrenje
Atļauja
Patvirtinimas
Goedkeuring
Godkjenning
Dopuszczenie
Godkännande
Dovoljenje
Povolenie
Onay
Дозвіл

Asi Interface

Dok. sz.

Változat

Nyelv

Méret

DGUV

Dok. sz.

Változat

Nyelv

Méret

c UL us

Dok. sz.

Változat

Nyelv

Méret

UQS document

Bescheinigung

Dok. sz.

Változat

Nyelv

Méret

Rendelési adatok

Rend. sz.	166889
Cikk neve	CTP-I2-AS2B-U-HA-AZC-SJ-166889
Súly	0,6kg
Vámtarifaszám	85365019
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

CTP-I2-AS2B-U-HA-AZC-SJ-166889 (Rend. sz. 166889)

Safety switch CTP-I2-AS – with AS-i connection, plug connector M12 (open-circuit current principle)

Ismertetés

Approach direction

Guard locking type

Control of the guard locking solenoid

AS-Interface inputs

AS-Interface outputs

LED function display

Dimensional drawings

Connection examples

Connection examples

Műszaki adatok

Approvals

Workspace

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Tartozékok

Letöltések

Teljes csomag

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Cookie-értesítés