AR evaluation unit CES-AR-AES-12
- Central evaluation of an AR switch chain
- Status of each individual switch can be recognized
- For switch chains of up to 12 devices
- Four individual safe relay contacts
- Category 4/PLe according to EN ISO 13849-1
Ismertetés
Important: A switch chain comprising the following safety switches can be connected to the AR evaluation unit:
CES-AR-C01 / CES-AR-C02 / CES AR-C04 / ESL-AR / CET- AR / CTP-AR
Function
The AR evaluation unit is used to evaluate the individual safety switches in a CES-AR-... switch chain and the safe interruption of a safety circuit.
The unit has two inputs for connection of a CES-AR... switch chain. The safety contacts are switched as a function of the input signals. Downstream parts of the safety circuit can be monitored using a feedback loop.
The switching states of the connected safety switches can be signaled by means of monitoring outputs.
If the actuator on one of the safety switches in the switch chain is moved out of the actuating range, the AR evaluation unit opens its contacts and the corresponding monitoring output is reset.
The system is designed so that failures will not result in the loss of the safety function. The occurrence of failures is detected by cyclic self-monitoring at the latest at the next demand to close the safety contacts.
The system can be started either manually using a start button or automatically.
Category according to EN ISO 13849-1
Due to two redundant safety paths (relay contacts) with 2 internal, monitored normally open contacts per safety path, suitable for:
- Category 4 / PL e according to EN ISO 13849-1
Each safety path is independently safe.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
OUT | Safe state/self-test |
Important: The plug-in connection terminals are not included and must be ordered separately.
Dimensional drawings
Connection examples
Connection examples
Műszaki adatok
Approvals
Operating and display elements
LED display | |
OUT | LED yellow: AR chain status |
DIA | LED red: fault display |
STATE | LED green: device status |
Electrical connection values
Connection cross section | 0.14 ... 2.5 mm² |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 4 kV |
EMC protection requirements | Acc. to EN 60947-5-3 |
Switching delay from state change | max. 480 ms (Corresponds to the risk time according to EN 60947-5-3. This is the maximum OFF time for the safety outputs following removal of the actuator.) |
Degree of contamination (external, according to EN 60947-1) | 2 |
Y1/Y2 | |
Current via feedback loop | 5 ... 8 ... 10 mA |
permissible resistance in feedback loop | max. 600 Ω |
O1 ... O12 | |
Output type | Semiconductor outputs, p-switching, short circuit proof |
Output voltage | |
LOW | 0 ... 1 V DC |
HIGH | UB - 20% ... UB V DC |
Output current | max. 20 mA |
OUT AR | |
Output type | Semiconductor output, p-switching, short circuit proof |
Output voltage | |
LOW | 0 ... 1 V DC |
HIGH | UB - 20 % ... UB V DC |
Output current | max. 20 mA |
DIA | |
Output type | Semiconductor output, p-switching, short circuit proof |
Output voltage | |
LOW | 0 ... 1 V DC |
HIGH | UB - 20% ... UB V DC |
Output current | max. 20 mA |
IA, IB | |
Number of connectible safety switches | max. 12 |
Safety inputs | 2 (for CES-AR switch chain) |
13/14, 23/24, 33/34, 43/44 | |
Fuse | |
external (safety circuit) according to EN 60269-1 | 6 AgG or 6 A circuit breaker (characteristic B or C) |
Discrepancy time | |
between the operating points of both relays | max. 25 ms |
Utilization category | |
AC-12 | 60 V 0.3 A |
DC-12 | 30 V 6 A |
AC-15 | 230 V 5 A |
DC-13 | 24 V 5 A |
DC-12 | 60 V 0.3 A |
AC-12 | 30 V 6 A |
Switching current | |
Relay outputs (at switching voltage AC/DC 21 ... 60 V | 1 ... 300 mA |
Relay outputs (at switching voltage AC 5 ... 230 V) | 10 ... 5000 mA |
Relay outputs (at switching voltage AC/DC 5 ... 30 V) | 10 ... 6000 mA |
Start button S | |
Response delay | |
Start button | 300 ... 600 ms |
Duration of actuation | min. 250 ms |
Input voltage | |
HIGH | 15 ... UB V DC |
LOW | 0 ... 2 V DC |
Input current | |
HIGH | 5 ... 8 ... 10 mA |
Power supply 1 | |
Fuse | |
external (operating voltage UB) | 2.5 ... 8 A |
Operating voltage DC | |
UB | 24 V DC -10% ... +10% regulated, residual ripple<5% |
Current consumption | |
IB (with relay energized) | 1200 mA (taking into account the load currents at the monitoring outputs (20 mA each)) |
Mechanical values and environment
Dimensions | 114 x 99 x 45 |
Connection type | plug-in screw terminals, coded |
Number of LED displays | 3 |
Ready delay | max. 8 s (After the operating voltage is switched on, the relay outputs are switched off and the monitoring outputs are set to LOW level during the ready delay. For visual indication of the delay, the green STATE LED flashes at a frequency of approx. 15 Hz.) |
Atmospheric humidity | |
not condensing | max. 80 % rH |
Mounting type | TH 35 mounting rail (EN IEC 60715) |
Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
Degree of protection | IP20 |
Ambient temperature | |
with UB = 24 V DC | -20 ... +55 °C |
Material | |
Housing | Plastic PA6.6 |
O1 ... O12 | |
Number of monitoring outputs | 12 |
13/14, 23/24, 33/34, 43/44 | |
Number of safety contacts | 4 Relay with internally monitored contacts |
Switching frequency | 1 Hz (If the current load is>100 mA, a switching frequency of 0.1 Hz should not be exceeded as this will affect the mechanical life of the relay contacts.) |
Mechanical life | |
Relay | 10 x 10⁶ |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
Number of switching cycles | |
≤ 1 A at 24 V DC | max. 540000 1/y |
≤ 3 A at 24 V DC | max. 107000 1/y |
≤ 0.1 A at 24 V DC | max. 720000 1/y |
Mission time | 20 y (This value is dependent on the number of switching cycles and the switching current.) |
Monitoring of the guard position | |
Category | 4 (This value is dependent on the number of switching cycles and the switching current.) |
Performance Level | PL e (This value is dependent on the number of switching cycles and the switching current.) |
PFHD | 1.5 x 10-8 (This value is dependent on the number of switching cycles and the switching current.) |
Tartozékok
CES-AR-C01-EH-SA
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Fixcode evaluation (incl. actuator CES-A-BPA)
- Actuator CES-A-BPA included
CES-AR-C01-AH-SA
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Unicode
CES-AR-C01-CH-SA
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Multicode
CES-AR-CL2-CH-SA-105747
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 1 m, plug connector M12, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CL2-AH-SA-105748
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 1 m, plug connector M12, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CR2-CH-SA-115792
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 0.15 m, plug connector M12, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CL2-CH-SA-115793
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 0.15 m, plug connector M12, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CL2-CH-SG-105752
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M8, 8-pin
- Multicode
- Two safety screws M4x14 included
CES-AR-CL2-AH-SG-105753
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M8, 8-pin
- Unicode
- Two safety screws M4x14 included
CES-AR-CL2-CH-L05-109045
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 5 m, flying lead, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CL2-AH-L05-109047
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 5 m, flying lead, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CL2-CH-L10-109049
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 10 m, flying lead, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CL2-AH-L10-109051
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 10 m, flying lead, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CL2-AH-L20-109055
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge left
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 20 m, flying lead, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CR2-CH-SA-105745
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 1 m, plug connector M12, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CR2-AH-SA-105746
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 1 m, plug connector M12, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CR2-CH-SG-105750
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M8, 8-pin
- Multicode
- Two safety screws M4x14 included
CES-AR-CR2-AH-SG-105751
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M8, 8-pin
- Unicode
- Two safety screws M4x14 included
CES-AR-CR2-CH-L05-109044
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 5 m, flying lead, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CR2-AH-L05-109046
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 5 m, flying lead, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CR2-CH-L10-109048
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 10 m, flying lead, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CR2-AH-L10-109050
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 10 m, flying lead, 8-core
- Unicode
- Two safety screws M4x14 included
CES-AR-CR2-CH-L20-109052
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 20 m, flying lead, 8-core
- Multicode
- Two safety screws M4x14 included
CES-AR-CR2-AH-L20-109054
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 20 m, flying lead, 8-core
- Unicode
- Two safety screws M4x14 included
CES-I-AR-U-C04-USA-119473
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 1 m, plug connector M12, 8-core
- Unicode
CES-I-AR-M-C04-USA-119479
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 1 m, plug connector M12, 8-core
- Multicode
CES-I-AR-U-C04-SG-119469
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Plug connector M8, 8-pin
- Unicode
CES-I-AR-M-C04-SG-119474
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Plug connector M8, 8-pin
- Multicode
CES-I-AR-U-C04-U05-119470
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 5 m, flying lead, 8-core
- Unicode
CES-I-AR-U-C04-U10-119471
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 10 m, flying lead, 8-core
- Unicode
CES-I-AR-M-C04-U05-119475
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 5 m, flying lead, 8-core
- Multicode
CES-I-AR-M-C04-U10-119476
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 10 m, flying lead, 8-core
- Multicode
CES-I-AR-M-C04-U20-119477
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Connecting cable PUR, 20 m, flying lead, 8-core
- Multicode
CET1-AR-CRA-AH-50X-SG-103418
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50X-SG-109401
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Approach direction A (delivery state)
CET2-AR-CRA-CH-50X-SG-110082
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Approach direction A (delivery state)
CET2-AR-CRA-AH-50X-SG-110240
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- Approach direction A (delivery state)
CET2-AR-CRA-AH-50S-SG-109075
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Feedback loop
- Approach direction A (delivery state)
CET1-AR-CRA-CH-50X-SG-105763
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Approach direction A (delivery state)
CET1-AR-CRA-CH-50S-SG-105764
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Feedback loop
- Approach direction A (delivery state)
CET1-AR-CRA-AH-50S-SG-105802
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Feedback loop
- Approach direction A (delivery state)
CET4-AR-CRA-AH-50X-SG-111683
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Approach direction A (delivery state)
CET4-AR-CRA-CH-50X-SG-111684
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
CET3-AR-CRA-CH-50S-SG-112992
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Feedback loop / start button
- Approach direction A (delivery state)
CET3-AR-CRA-CH-50X-SG-110906
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
CET4-AR-CRA-CH-50S-SG-113081
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Feedback loop / start button
- Approach direction A (delivery state)
CET4-AR-CRA-CH-50X-SG-C2355-113609
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Approach direction A (delivery state)
CET1-AR-CDA-CH-50X-SG-109231
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- With double ramp
- Approach directions A and C (delivery state)
CET3-AR-CDA-CH-50X-SG-114090
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- With double ramp
- Approach directions A and C (delivery state)
CET4-AR-CDA-CH-50X-SG-114712
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- With double ramp
- Approach directions A and C (delivery state)
CET1-AR-CDA-AH-50X-SG-106275
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- With double ramp
- Approach directions A and C (delivery state)
CET1-AR-CRA-AH-50A-SG-106616
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Feedback loop
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET2-AR-CRA-CH-50F-SG-C2312-109941
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Escape release, 105 mm long
- Approach direction A (delivery state)
CET1-AR-CRA-CH-50F-SG-110241
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET3-AR-CRA-CH-50F-SG-110907
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET4-AR-CRA-CH-50F-SG-114650
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50F-SG-113965
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET1-AR-CRA-AH-50F-SG-106159
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET3-AR-CRA-CH-50X-SG-C2290-110114
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
CET1-AR-CRA-CH-50X-SG-C2290-109015
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50X-SH-110103
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Approach direction A (delivery state)
CET3-AR-CRA-CH-50X-SH-110104
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Door monitoring output
- Approach direction A (delivery state)
CET4-AR-CRA-AH-50X-SH-110201
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Approach direction A (delivery state)
CET4-AR-CRA-CH-50X-SH-110202
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Door monitoring output
- Approach direction A (delivery state)
CET1-AR-CRA-AH-50X-SH-110203
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Teach-in input
- Approach direction A (delivery state)
CET1-AR-CRA-CH-50X-SH-110204
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector MR23 (RC18)
- Multicode
- Approach direction A (delivery state)
CET2-AR-CRA-AH-50X-SH-110205
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Teach-in input
- Approach direction A (delivery state)
CET2-AR-CRA-CH-50X-SH-110206
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50X-SH-C2375-115202
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Approach direction A (delivery state)
CET1-AR-CRA-CH-50F-SH-C2312-124104
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Multicode
- Escape release, 105 long
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50F-SH-C2312-111725
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Escape release, 105 mm long
- Approach direction A (delivery state)
CET1-AR-CRA-AH-50F-SH-C2312-110943
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Teach-in input
- Escape release, 105 mm long
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50F-SH-113148
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET4-AR-CRA-AH-50F-SH-116285
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Escape release, 75 mm long
- Approach direction A (delivery state)
CET1-AR-CRA-AH-50X-SH-C2290-113022
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Teach-in input
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
CET3-AR-CRA-AH-50X-SH-C2290-113024
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Teach-in input
- Wire front release (bowden), 3 m, automatic return
- Approach direction A (delivery state)
CTP-L2-AR-M-HA-AZ-SAB-123361
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L1-AR-U-HA-AZ-SAB-122812
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L2-AR-U-HA-AZ-SAB-122814
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L1-AR-M-HA-AZ-SAB-123307
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L1-AR-U-HA-AE-SAB-122813
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Door monitoring output
- With escape release
- Approach directions A, B and C (delivery state)
CTP-L1-AR-M-HA-AE-SAB-123308
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- With escape release
- Approach directions A, B and C (delivery state)
CTP-L1-AR-U-HA-AZ-SH-123362
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M23
- Unicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L1-AR-M-HA-AZ-SH-123363
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M23
- Multicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L2-AR-U-HA-AZ-SH-123366
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M23
- Unicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L2-AR-M-HA-AZ-SH-123369
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M23
- Multicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
CTP-L1-AR-U-HA-AE-SH-123373
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M23
- Unicode
- Door monitoring output
- With escape release
- Approach directions A, B and C (delivery state)
CTP-L1-AR-M-HA-AE-SH-123374
- Safety switch with guard locking and integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M23
- Multicode
- Door monitoring output
- With escape release
- Approach directions A, B and C (delivery state)
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Egyéb dokumentumok
Rendelési adatok
Rend. sz. | 098225 |
Cikk neve | CES-AR-AES-12 |
Súly | 0,326kg |
Vámtarifaszám | 85364110 |
ECLASS | 27-27-24-03 Safety-related transponder switch |