KezdőlapProductsTransponder-coded safety switches with guard lockingCTMCTM-BRCTM-L2-BR-M-ZZ-V15-P-173223

CTM-L2-BR-M-ZZ-V15-P-173223 (Rend. sz. 173223)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Transponder-coded safety switch CTM-L2-BR, connection cable, flying lead

Guard locking only suitable for process protection: The safety outputs are switched on when guard locking is active.
Series connection possible
Open-circuit current principle
Category 4 / PL e according to EN ISO 13849-1
Actuation/extension/retention force: 35/30/15 N
Connection cable, connecting cable, 15m, flying lead
Multicode
Hygienic version

CTM-L2-BR-M-ZZ-V15-P-173223 (Rend. sz. 173223)

Ismertetés

Multicode evaluation

Every suitable actuator is detected by the switch.

Guard locking type

CTM‑L2

Guard locking actuated by power ON and released by spring force (open-circuit current principle)

series connection

Safety switches in the CTM-...-BR version can be integrated into a BR device chain. Further information on series connection can be found in the operating instructions for the device.

Designation	Function	Connecting cable conductor coloring
FI1B	Enable input, channel B	WH
UB	Electronics and solenoid operating voltage, 24 V DC	BN
FO1A	Safety output, channel A	GN
FO1B	Safety output, channel B	YE
OD/C	Door position monitoring output/communication	GY
FI1A	Enable input, channel A	PK
0VUB	Electronics and solenoid operating voltage, 0 V DC	BU
IMP	Solenoid control input 24 V DC	RD

Fuse
external (operating voltage UB)	0.7 ... 8 A
Power consumption
at max. switching frequency	3 W
Rated insulation voltage U_i	50 V
Rated impulse withstand voltage U_imp	0.5 kV
Discrepancy time
both safety outputs	max. 10 ms Acc. to EN 60947-5-3
Turn-on time	max. 500 ms
Solenoid duty cycle	100 %
Off-state current Ir	max. 0.25 mA
Risk time according to EN 60947-5-3	max. 200 ms
Risk time according to EN 60947-5-3, extension for each additional device	max. 10 ms
Switching load	DC 24V, UL Class 2 (alternatively, see operating instructions)
Safety class
EN IEC 61140	III
Test pulse duration	max. 0.3 ms
Test pulse interval	100 ms
Degree of contamination (external, according to EN 60947-1)	3
	Solenoid IMP
Input voltage
Guard locking active (closed)	20.4 ... 26.4 V DC
Guard locking not active (open)	0 ... 5 V DC
Current consumption
Guard locking active (closed)	20 ... 50 mA
	Door position monitoring output/communication OD/C
Output type	p-switching, short circuit-proof
Output voltage	0.8xUB ... UB V DC
Switching current	1 ... 50 mA
	Safety input
Current consumption	max. 7 mA Safety inputs Fl1A/Fl1B
	Safety outputs FO1A / FO1B
Output type	2 semiconductor outputs, p-switching, short circuit-proof
Output voltage
HIGH U(FO1A) / U(FO1B)	UB-1.5 ... UB V DC
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
Discrepancy time
both safety outputs	max. 10 ms Acc. to EN 60947-5-3
Turn-on time	max. 400 ms
Utilization category
DC-13	24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Off-state current Ir	max. 0.25 mA
Risk time according to EN 60947-5-3
Single device	max. 200 ms
Risk time according to EN 60947-5-3, extension for each additional device	max. 10 ms
Electrical switching frequency	max. 0.25 Hz
Switching current
per safety output FO1A / FO1B	1 ... 150 mA
Test pulse duration	max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm)
Test pulse interval	100 ms
	Operating voltage UB
Operating voltage DC
U_UB	24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
Current consumption
I_UB at operating voltage UB = 24 V	max. 500 mA

Approach speed	max. 20 m/min
Connection type	Connecting cable (in screwed connection plug connector(s) / counterpart When using high-pressure cleaners, please observe the notices in the operating instructions.)
Extraction force	30 N
Ready delay	5.5 s
Actuating force	35 N
Installation orientation	any
Switching frequency	max. 0.25 Hz
Mechanical life	1 x 10⁶
Overtravel	2 mm
Retention force	15 N
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67/IP69/IP69K (screwed tight plug connector/mating component)
Ambient temperature
with U_B = 24V DC	-20 ... +60 °C
Material
Encapsulation	Technomelt PA6208 black
Safety switch housing	Reinforced thermoplastic
Seals	Fluorinated rubber (FKM)
Cable sheath	PVC
Locking force F_max	1300 N
Locking force F_Zh	1000 N
Guard locking principle	Open-circuit current principle

Rend. sz.	173223
Cikk neve	CTM-L2-BR-M-ZZ-V15-P-173223
Súly	1,03kg
Vámtarifaszám	85365019000
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

1	LEDs
2	Active read head face
3	Auxiliary release (optional)

Repeat accuracy R
according to EN 60947-5-2	10 %

CTM-L2-BR-M-ZZ-V15-P-173223 (Rend. sz. 173223)

Transponder-coded safety switch CTM-L2-BR, connection cable, flying lead

Ismertetés

Multicode evaluation

Guard locking type

series connection

Terminal assignment

Dimensional drawings

Connection examples

Műszaki adatok

Approvals

Workspace

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Tartozékok

Letöltések

Teljes csomag

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Cookie-értesítés