KezdőlapProductsTransponder-coded safety switches with guard lockingCTSCTS-BPCTS-C1-BP-CC-FLX-AP-VSA-169052
Transponder-coded safety switch CTS-C1-BP with FlexFunction, M12
- Up to category 4 / PL e according to EN ISO 13849-1
- Closed-circuit current principle
- Connecting cable , PVC, 25 cm, plug connector M12, 8-pin
- Monitoring outputs door position 1 / guard locking and escape release
Ismertetés
Guard locking type
CTS-C1 | Guard locking actuated by spring force and power-ON released (closed-circuit current principle). |
FlexFunction
The actuator configures the switch on setup. Depending on the actuator selected, guard lock monitoring of the safety switch is active or inactive and evaluation of the actuator code takes place with a high or low coding level.
Auxiliary release / escape release
- Auxiliary release on front and rear side
- Escape release can be retrofitted, on rear side
Connector assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IMP | Operating voltage of solenoid 24 V DC | WH |
| 2 | UB | Electronics operating voltage 24 V DC | BN | |
| 3 | FO1A | Safety output, channel A | GN | |
| 4 | FO1B | Safety output, channel B | YE | |
| 5 | OX1/C | Monitoring output 1 / communication | GY | |
| 6 | OX2 | Door monitoring output 2 | PK | |
| 7 | 0VUB | Electronics operating voltage 0 V DC | BU | |
| 8 | IMM | Operating voltage of solenoid 0 V DC | RD |
Assignment of pins 5 and 6 depends on the function actuator
| Pin | A-FLX-D-0C-167919 | A-FLX-D-0D-169044 | A-FLX-D-0E-169045 | A-FLX-D-0F-169046 |
|---|---|---|---|---|
| L + HC | I + HC | L + LC | I + LC | |
| 3 |  | | ||
| 4 | | | ||
| 5 | OD/C Door position 1 / Communication | OL/C Guard locking / communication | OD/C Door position 1 / Communication | OL/C Guard locking / communication |
| 6 | OER escape release | OER escape release | OER escape release | OER escape release |
Dimensional drawings
| 1 | Auxiliary release |
| 2 | LEDs |
Connection examples
Műszaki adatok
Approvals
Electrical connection values
| Fuse | |
| UB | 1 ... 8 A external |
| IMP | 1 ... 8 A external |
| Power consumption | 9 W |
| rated conditional short-circuit current | 100 A |
| Rated insulation voltage Ui | 32 V |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +20% (reverse polarity protected, regulated, residual ripple<5%, SELV) |
| Discrepancy time | max. 10 ms |
| Turn-on time | max. 400 ms |
| EMC protection requirements | Acc. to EN 60947-5-3 |
| Solenoid operating voltage DC | 24 V DC -15% ... +20% reverse polarity protected, regulated, residual ripple<5%, SELV |
| Solenoid duty cycle | 100 % |
| Risk time according to EN 60947-5-3 | max. 200 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 10 ms |
| Switching load | |
| according to UL | DC 24 V, class 2 |
| Safety class | III |
| Current consumption | |
| IUB | 50 mA |
| IIMP | 500 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring outputs Ox/C | |
| Output type | p-switching, short circuit-proof |
| Output voltage | 0.8xUB ... UB V DC |
| Output current | |
| L configuration (guard lock monitoring active) | 1 ... 20 mA |
| I-configuration (guard lock monitoring inactive) | 1 ... 10 mA |
| Safety outputs FO1A/FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| UFO1A /UFO1B LOW | 0 ... 1 V DC |
| UFO1A /UFO1B HIGH | UB-4V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths) |
| Output current | |
| L configuration (guard lock monitoring active) | 1 ... 80 mA |
| I-configuration (guard lock monitoring inactive) | 1 ... 75 mA |
| Utilization category | |
| DC-13 L configuration (guard lock monitoring active) | 24 V 80 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| DC-13 I configuration (guard lock monitoring inactive) | 24 V 75 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| Test pulse duration | max. 0.3 ms |
| Test pulse interval | min. 96 ms |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Extraction force | 25 N |
| Ready delay | max. 1 s |
| Actuating force | 25 N |
| Installation orientation | any |
| Mechanical life | 1 x 10⁶ |
| Retention force | 10 N |
| Shock and vibration resistance | Acc. to EN 60947-5-3 |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | -20 ... +55 °C (A maximum value of +50 °C applies in the I-configuration of the switch (guard lock monitoring inactive)) |
| Material | |
| Safety switch housing | Reinforced thermoplastic |
| Connecting cable | PVC |
| Switch head cover | Die-cast zinc |
| Locking force Fmax | 3900 N |
| Locking force FZh | 3000 N |
| Guard locking principle | Closed-circuit current principle |
| Connection X1 | |
| Connection type | Connecting cable with plug connector M12 |
| Static bending radius | 8x cable diameter |
| Cable outlet | straight |
| Cable length | 0.25 m |
| Number of pins | 8 |
| Safety outputs FO1A/FO1B | |
| Switching frequency | max. 0.2 Hz |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | 3 | 6.44x10-9 | 4 | 20 y |
| Monitoring of guard locking | PL e | 3 | 6.44x10-9 | 4 | 20 y |
| Valid only with active guard lock monitoring (guard locking for personnel protection). Dependent on the actuator used. | |||||
| PL | Maximum SIL | Category | Mission time | |
|---|---|---|---|---|
| Control of guard locking | Depending on external control of guard locking | 20 y | ||
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Tartozékok
Actuator
Function actuator for safety switch CTS
167919
A-FLX-D-0C-167919
A-FLX-D-0C-167919
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the guard locking, high coding level (L+HC)
169045
A-FLX-D-0E-169045
A-FLX-D-0E-169045
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the guard locking, low coding level (L+LC)
169044
A-FLX-D-0D-169044
A-FLX-D-0D-169044
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the door position, high coding level (I+HC)
169046
A-FLX-D-0F-169046
A-FLX-D-0F-169046
- Function actuator for configuration of the safety switch CTS
- Configuration: monitoring of the door position, low coding level (I+LC)
Connection material
Function expansion
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Declarations of conformity
EU-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
EU-Konformitätserklärung
Dok. sz.
EDC20001628
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
UKCA-Konformitätserklärung
Dok. sz.
EDC20001651
Változat
Nyelv
Méret
0,2 MB
Instructions
Operating Instructions Transponder-Coded Safety Switch with Guard Locking CTS-C1-BP/BR-FLX High/Low Coding Level
Dok. sz.
Változat
Nyelv
Méret
Operating Instructions Transponder-Coded Safety Switch with Guard Locking CTS-C1-BP/BR-FLX High/Low Coding Level
Dok. sz.
MAN20001587
Változat
12/23
Nyelv
Méret
7,1 MB
Mode d’emploi Interrupteur de sécurité à codage par transpondeur avec interverrouillage CTS-C1-BP/BR-FLX Haut / Bas niveau de codage
Dok. sz.
MAN20001587
Változat
12/23
Nyelv
Méret
7,2 MB
Manual de instrucciones Interruptor de seguridad codificado por transponder con bloqueo CTS-C1-BP/BR-FLX con alto/bajo nivel de codificación
Dok. sz.
MAN20001587
Változat
12/23
Nyelv
Méret
7,2 MB
Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung CTS-C1-BP/BR-FLX Hoch-/Niedrigcodiert
Dok. sz.
MAN20001587
Változat
12/23
Nyelv
Méret
7,2 MB
操作説明書 トランスポンダー コーデッド安全スイッチ ガードロック付きCTS-C1-BP/BR-FLX 高 / 低コーディングレベル
Dok. sz.
MAN20001587
Változat
12/23
Nyelv
Méret
7,5 MB
Egyéb dokumentumok
Approvals and certificates
FCC
Dok. sz.
Változat
Nyelv
Méret
FCC
Dok. sz.
20001625
Változat
Nyelv
Méret
0,2 MB
ISED_CTS
Dok. sz.
Változat
Nyelv
Méret
ISED_CTS
Dok. sz.
20001626
Változat
Nyelv
Méret
0,1 MB
UL
Dok. sz.
Változat
Nyelv
Méret
UL
Dok. sz.
Változat
Nyelv
Méret
0,3 MB
Sales documents
1 つですべてに対応
FlexFunction 付き安全スイッチ CTS
Dok. sz.
Változat
Nyelv
Méret
1 つですべてに対応
FlexFunction 付き安全スイッチ CTS
Dok. sz.
171724
Változat
02-05/22
Nyelv
Méret
6,6 MB
Communication du futur – industrie 4.0
Dok. sz.
Változat
Nyelv
Méret
Communication du futur – industrie 4.0
Dok. sz.
159044
Változat
08-03/23
Nyelv
Méret
4,7 MB
Future-proof Communication – Industry 4.0
Dok. sz.
Változat
Nyelv
Méret
Future-proof Communication – Industry 4.0
Dok. sz.
159043
Változat
08-03/23
Nyelv
Méret
5,8 MB
La comunicación del futuro: la industria 4.0
Dok. sz.
Változat
Nyelv
Méret
La comunicación del futuro: la industria 4.0
Dok. sz.
159045
Változat
08-03/23
Nyelv
Méret
5,8 MB
One fits all
Finecorsa di sicurezza CTS con FlexFunction
Dok. sz.
Változat
Nyelv
Méret
One fits all
Finecorsa di sicurezza CTS con FlexFunction
Dok. sz.
169847
Változat
02-05/22
Nyelv
Méret
2,8 MB
One fits all
Safety switch CTS with FlexFunction
Dok. sz.
Változat
Nyelv
Méret
One fits all
Safety switch CTS with FlexFunction
Dok. sz.
169642
Változat
02-05/22
Nyelv
Méret
2,8 MB
UQS document
Bescheinigung
Dok. sz.
Változat
Nyelv
Méret
Bescheinigung
Dok. sz.
ECO20001630
Változat
Nyelv
Méret
0,2 MB
CAD-adatok
Rendelési adatok
| Rend. sz. | 169052 |
| Cikk neve | CTS-C1-BP-CC-FLX-AP-VSA-169052 |
| Súly | 0,6kg |
| Vámtarifaszám | 85365019000 |
| ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |
