CES-BR safety switch
Benefits for you
- Communicating safety switch. Possible to connect up to 20 safety switches in series
- Industry 4.0 ready
- Integrated short circuit monitoring by pulsing
- Large actuating range
- High level of protection against tampering
- Diagnostics using LED
- Two safe semiconductor outputs
- Suitable for applications in category 4/PL e according to EN ISO 13849-1
Industry 4.0 ready
Devices of the BR and BP families can communicate and provide a wealth of device data. These data can be transferred via a gateway to a standardized bus system such as IO-Link.Design and functionality
The safety switches are connected together using connectors. The CES-BR-C07 has two safety outputs. In a switch chain, the signals from the safety outputs are connected to the next switch. The outputs on the last switch in the chain are connected directly to drives, downstream safety relays or safe control systems. Mechanical safety switches additionally can be integrated into the chain of CES-BR-C07 devices.
Diagnostic information
In addition to the advantages of series connection, safety switches CES-BR-C07 allow comprehensive diagnostic information to be forwarded to the control system. The devices supply process-relevant parameters in real time. They even provide information on preventive maintenance. The weak-range indication provides timely information about whether the actuator is in the transponder field’s limit range, for example. This situation usually occurs when safety doors settle over time, causing the actuator to drift out of the actuating range. The sensors measure relevant parameters in the surroundings to indicate problems before a machine failure can occur. In combination with a BR IO-Link Gateway, this information is polled from each switch in the chain and provided to the control system via IO-Link.Termékek (3)
Nem található eredmény
165914
CES-I-BR-CC-FLX-C07-SA-165914
Non-contact safety switches CES-I-BR-CC-FLX-C07, with FlexFunction, suitable for actuators with same coding
CES-I-BR-CC-FLX-C07-SA-165914
Non-contact safety switches CES-I-BR-CC-FLX-C07, with FlexFunction, suitable for actuators with same coding
- Safety switch with integrated evaluation electronics
- Suitable for actuator with same coding
- Several devices can be connected in series, max. 20
- Switch chains up to 200 m long
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Diagnostic information via BR IO-Link Gateway
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- Plug connector M12, 8-pin (aligned)
- The safety switch can be used only in conjunction with actuators designated for this purpose.
156233
CES-I-BR-M-C07-SA-156233
Non-contact safety switches CES-I-BR-.-C07, M12
CES-I-BR-M-C07-SA-156233
Non-contact safety switches CES-I-BR-.-C07, M12
- Safety switch with integrated evaluation electronics
- Several devices can be connected in series, max. 20
- Multicode
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Monitoring output OD
- Diagnostic information via BR/IO-Link Gateway GWY-CB or ESM-CB
- Three active faces
- Plug connector M12, 8-pin (aligned)
- Switch chains up to 200 m long
157920
CES-I-BR-U-C07-SA-157920
Non-contact safety switches CES-I-BR-.-C07, M12
CES-I-BR-U-C07-SA-157920
Non-contact safety switches CES-I-BR-.-C07, M12
- Safety switch with integrated evaluation electronics
- Several devices can be connected in series, max. 20
- Unicode
- 2 safety outputs (semiconductor outputs)
- Short circuit monitoring
- Category 4 / PL e according to EN ISO 13849-1
- Monitoring output OD
- Diagnostic information via BR/IO-Link Gateway GWY-CB or ESM-CB
- Three active faces
- Plug connector M12, 8-pin (aligned)
- Switch chains up to 200 m long
