AnasayfaProductsPosition switches and multiple limit switchesEGT and EGM single hole fixing limit switchesEGT11R2N50SAM4
Precision single hole fixing limit switch EGT11
- with reed contact and protective diode
- Plunger material stainless steel
- Any installation orientation
Açıklama
Switching element
Reed contact, 1 NC contact
Never switch incandescent lamps. Not even for test purposes. Single hole fixing limit switches must not be used as an end stop.
Dimensional drawings
Connection examples
Connection examples
Teknik Veriler
Approvals
Electrical connection values
| Rated insulation voltage Ui | 50 V |
| Utilization category | |
| DC-13 | 0.3 A 24 V |
| AC-12 | 0.3 A 30 V |
| Short circuit protection according to IEC 60269-1 | 0.4A gG |
| Switching voltage | |
| min. | 1 V |
| Switching current | |
| min. at 24 V | 1 mA |
Mechanical values and environment
| Approach speed | max. 8 m/min |
| Connection type | Plug connector M8 with 50 mm cable section (4-pin) |
| Number NC contacts | 1 |
| Design | Thread M14 x 1 |
| Actuating element | Ball plunger (short) |
| Actuating force | 3 N |
| Installation orientation | any |
| Mechanical life | 30 x 10⁶ |
| Switching principle | Reed contact |
| Degree of protection | IP67 (Mating connector inserted and screwed tight.) |
| Ambient temperature | -5 ... +65 °C |
| Material | |
| Contact | Rhodium |
| Sleeve | Brass, nickel plated |
| Threaded section | stainless steel |
| Repeat accuracy (absolute) | ±0.01 mm (on axial actuation in the retracted state after approx. 2,000 operating cycles) |
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU declaration of conformity
Dok. No.
Versiyon
Dil
Boyut
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. No.
EDC2539628
Versiyon
Dil
Boyut
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. No.
EDC2539628
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001551
Versiyon
Dil
Boyut
0,1 MB
Instructions
Operating instructions Precision Single Hole Fixing Limit Switches EGT with Reed Contacts
Dok. No.
Versiyon
Dil
Boyut
Operating instructions Precision Single Hole Fixing Limit Switches EGT with Reed Contacts
Dok. No.
MAN20001597
Versiyon
06/24
Dil
Boyut
0,6 MB
Mode d’emploi Interrupteurs de position de précision EGT avec contacts Reed
Dok. No.
MAN20001597
Versiyon
06/24
Dil
Boyut
0,6 MB
Manual de instrucciones Final de carrera de precisión EGT con contactos reed
Dok. No.
MAN20001597
Versiyon
06/24
Dil
Boyut
0,6 MB
Betriebsanleitung Präzisions-Einbaugrenztaster EGT mit Reed-Kontakten
Dok. No.
MAN20001597
Versiyon
06/24
Dil
Boyut
0,6 MB
Diğer Belgeler
Approvals and certificates
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
Sales documents
Position Switches and Multiple Limit Switches
Dok. No.
Versiyon
Dil
Boyut
Position Switches and Multiple Limit Switches
Dok. No.
157836
Versiyon
01-03/18
Dil
Boyut
4,1 MB
Interrupteurs de position et boîtiers multipistes
Dok. No.
157837
Versiyon
01-03/18
Dil
Boyut
4,1 MB
Positionsschalter und Reihengrenztaster
Dok. No.
157835
Versiyon
01-03/18
Dil
Boyut
4,1 MB
Sipariş verileri
| Sip. No. | 084000 |
| Makale adı | EGT11R2N50SAM4 |
| Ağırlık | 0,06kg |
| Gümrük sınıfı | 85365019000 |
| ECLASS | 27-27-06-01 Position switch (Type 1) |
