Safety switch TX, escape release
- Auxiliary release on the front
- Escape release on the rear side
- Release under load possible
- With door monitoring contact
Açıklama
Solenoid operating voltage
- AC/DC 24 V +10%, -15%
LED function display
The switch has a function display (2 LEDs, red and green). The LED voltage is same as the solenoid operating voltage.
Guard locking type
TX3 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the solenoid. Release under load possible. |
Switching element
ETX B | Slow-action switching contact 2 NC / 1 NO + 1 NC (door monitoring contact) |
Auxiliary release
This is used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer).
Escape release
This is used for manual release of guard locking from the danger zone without tools. With identification of On/Off position.
Functional drawings
Dimensional drawings
1 | Auxiliary release |
2 | LED indicator |
3 | Locking screw |
4 | Escape release, basic position |
5 | Escape release, unlocked position |
Connection examples
Teknik Veriler
Approvals
Operating and display elements
LED display | Operating voltage corresponds to the solenoid voltage (2 LEDs; green, red) |
Electrical connection values
Power consumption | 8 W (48 W at the instant switched on) |
Connection cross section | 0.34 ... 1.5 mm² |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 2.5 kV |
Utilization category | |
AC-15 | 4 A 50 V |
DC-13 | 4 A 24 V |
Short circuit protection according to IEC 60269-1 | 4A gG |
Solenoid operating voltage | |
AC/DC | 24 V -15% ... +10% |
Solenoid duty cycle | 100 % |
Switching voltage | |
min. at 10 mA | 12 V |
Switching current | |
min. at 24 V | 1 mA |
Control voltage | |
Us AC/DC | 24 V |
thermal rated current Ith | 4 A |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | A |
Connection type | |
3 x | M20 x 1.5 |
Number of door position NC contacts | 1 |
Number of guard lock monitoring NO contacts | 1 |
Number of guard lock monitoring positively driven contacts | 2 |
Extraction force | 35 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 35 N |
Installation orientation | any |
Insertion depth | 32 mm |
Mechanical life | 1 x 10⁶ |
Retention force | 50 N (Unlocking under load) |
Switching principle | Slow-action switching contact |
Degree of protection | IP67 |
Ambient temperature | -20 ... +80 °C |
Material | |
Contact | Silver alloy, gold flashed |
Housing | Die-cast alloy cathodically dipped |
Locking force Fmax | 1700 N |
Locking force FZh | 1300 N |
Guard locking principle | Closed-circuit current principle (Unlocking under load) |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of the guard position | 5x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V | ||
Monitoring of guard locking | 5x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
PL | Maximum SIL | Category | Mission time | |
---|---|---|---|---|
Control of guard locking | Depending on external control of guard locking | 20 y |
Miscellaneous
C number | |
C1991 | (Escape release with short actuator shaft) |
In combination with actuator ACTUATOR-X-GQ
Overtravel | 1 mm |
In combination with actuator ACTUATOR-X-GNQ
Overtravel | 8 mm |
Aksesuar
RIEGEL TX-AF
- Bolt for safety switch with escape release TX...C1991 and 2161
- Steel bolt
- For doors hinged on the right
- escape lever
- Detent knob in open position
- Suitable for a door gap of approx. 15 mm
RIEGEL TX-CF
- Bolt for safety switch with escape release TX...C1991 and 2161
- Steel bolt
- For doors hinged on the left
- escape lever
- Detent knob in open position
- Suitable for a door gap of approx. 15 mm
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Mode d’emploi Interrupteur de sécurité TX…
Betriebsanleitung Sicherheitsschalter TX…
Istruzioni di impiego Finecorsa di sicurezza TX…
Diğer Belgeler
CAD Verileri
Sipariş verileri
Sip. No. | 085391 |
Makale adı | TX3B-A024MC1991 |
Ağırlık | 0,928kg |
Gümrük sınıfı | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |