AnasayfaProductsTransponder-coded safety switches without guard lockingCES-AR safety switchCES-AR-C01-EH-SA
Non-contact safety switch CES-AR-C01...
- Safety switch with integrated evaluation electronics
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Fixcode evaluation (incl. actuator CES-A-BPA)
- Actuator CES-A-BPA included
Açıklama
Approach direction
Can be adjusted in 90° steps
Short circuit monitoring
The switch generates its own clock signal on the output lines OA/OB. Pay attention to this aspect when connecting to control systems and relays.
Fixcode evaluation
An actuator CES-A-BPA is permanently allocated to the switch. The switch can be operated only with this actuator. The actuator is taught-in at EUCHNER prior to delivery. No additional actuators can be taught in.
Category according to EN 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN 13849-1
Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Additional connections
OUT | Monitoring output (semiconductor) |
RST | Reset input |
Typical actuating range
With actuator CES-A-BPA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.
With actuator CES-A-BDA-18
For a side approach direction for the actuator and safety switch, a minimum distance of s = 8 mm must be maintained so that the actuating range of the side lobes is not entered.
Connector assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IB | Enable input for channel 2 | WH |
| 2 | UB | Power supply, DC 24 V | BN | |
| 3 | OA | Safety output, channel 1 | GN | |
| 4 | OB | Safety output, channel 2 | YE | |
| 5 | OUT | Monitoring output | GY | |
| 6 | IA | Enable input for channel 1 | PK | |
| 7 | 0 V | Ground, DC 0 V | BU | |
| 8 | RST | Reset input | RD |
Dimensional drawings
| 1 | Active face |
Dimensional drawings
| 1 | LED status indication |
| 2 | Active face |
Connection examples
Teknik Veriler
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 300 V (Tested up to 75 V by employers' liability insurance association) |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 400 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 5 ms |
| Safety class | III |
| Current consumption | |
| no load on outputs | max. 50 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OUT | |
| Output type | p-switching, short circuit-proof |
| Output voltage | 0.8 x UB ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| Switching current | max. 200 mA |
| Safety outputs OA / OB | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| HIGH U(OA,OB) | UB-1.5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| LOW U(OA,OB) | 0 ... 1 V DC |
| rated conditional short-circuit current | max. 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24 V 400 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 400 mA |
| Test pulse duration | max. 1 ms |
Mechanical values and environment
| Connection type | M12 plug connector, 8-pin |
| Tightening torque | |
| Fixing screws | max. 1 Nm |
| Ready delay | 10 s |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Mounting distance | min. 40 mm |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67 |
| Ambient temperature | -20 ... +55 °C |
| Material | |
| Housing | Plastic, PBT |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
Actuator CES-A-BPA-098775 (Order no. 098775)
Workspace
| Actuator distance s | |
| Minimum distance for side approach direction | min. 6 mm |
| Switch-on distance | |
| with center offset m=0 | 22 mm (These values apply to surface installation of the actuator on metal.) |
| Secured switch-off distance sar | |
| with center offset m=0 | max. 58 mm (These values apply to surface installation of the actuator on metal) |
| Secured switching distance sao | |
| with center offset m=0 | min. 18 mm (These values apply to surface installation of the actuator on metal.) |
| Switching hysteresis | |
| with center offset m=0 | 1 ... 2 mm (These values apply to surface installation of the actuator on metal.) |
Electrical connection values
| Power supply | Inductive via read head |
Mechanical values and environment
| Tightening torque | |
| Fixing screws | max. 1 Nm |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | -25 ... +70 °C |
| Material | |
| Housing | Plastic (PBT) |
Components included in the set
| Included accessories | 2x safety screws M5x10 |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | - | 2.1x10-9 | 4 | 20 y |
In combination with actuator CES-A-BPA-098775
| Switch-on distance | 22 mm (on surface mounting on aluminum. In a non-metallic environment, the typical operating distances increase to 30 mm) |
| Secured switch-off distance sar | max. 58 mm |
| Secured switching distance sao | min. 18 mm |
| Switching hysteresis | 1 ... 2 mm |
Aksesuar
Connection material
Y-distributor M12 with connecting cable, without IO-Link evaluation
111696
AC-YD-V0,2-SBB-111696
AC-YD-V0,2-SBB-111696
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 0.2 m
112395
AC-YD-V1,0-SBB-112395
AC-YD-V1,0-SBB-112395
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 1 m
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Instructions
Operating Instructions Non-Contact Safety Switch CES-AR-C01-... (Unicode/Multicode/Fixcode)
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Non-Contact Safety Switch CES-AR-C01-... (Unicode/Multicode/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
1,6 MB
Mode d'emploi Interrupteur de sécurité sans contact CES-AR-C01-... (unicode / multicode/ code fixe)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
1,6 MB
Manual de instrucciones Interruptor de seguridad sin contacto CES-AR-C01-... (Unicode/Multicode/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
1,6 MB
Betriebsanleitung Berührungsloser Sicherheitsschalter CES-AR-C01-... (Uni-/Multi-/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
1,6 MB
Istruzioni di impiego Finecorsa di sicurezza senza contatto CES-AR-C01-... (Uni-/Multi-/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
1,6 MB
使用说明书 非接触式安全开关 CES-AR-C01-⋯ （特殊/通用/固定编码）
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
2,1 MB
Инструкция по эксплуатации Бесконтактный предохранительный выключатель CES-AR-C01-... (Uni-/Multi-/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
2,1 MB
Návod k použití Bezkontaktní bezpečnostní spínač CES-AR-C01-... (Unicode/Multicode/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
2,8 MB
Érintkezésmentes biztonsági kapcsoló CES-AR-C01-… (Uni-/multi-/állandó kód)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
1,6 MB
İşletim kılavuzu Temassız emniyet şalteri CES-AR-C01-... (Uni-/Multi-/Fixcode)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
2,0 MB
Instrucţiuni de utilizare Întrerupător de siguranţă fără contact CES-AR-C01-... (cod unic/mai multe coduri/cod fi x)
Dok. No.
2098039
Versiyon
20-02/20
Dil
Boyut
2,8 MB
Diğer Belgeler
Application examples
Approvals and certificates
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,2 MB
Sales documents
Flexibly safe - Transponder-coded safety systems CES
Dok. No.
Versiyon
Dil
Boyut
Flexibly safe - Transponder-coded safety systems CES
Dok. No.
120233
Versiyon
06-06/22
Dil
Boyut
7,3 MB
CAD Verileri
Sipariş verileri
| Sip. No. | 098582 |
| Makale adı | CES-AR-C01-EH-SA |
| Ağırlık | 0,22kg |
| Gümrük sınıfı | 85365019000 |
| ECLASS | 27-27-24-03 Safety-related transponder switch |
