EUCHNER – More than safety.
EUCHNER – More than safety.

ZSM2200-112033 (Sip. No. 112033)

ZSM, + and - buttons, vibration motor, 2 x selector switches, plug connector RC17

  • 3-stage function
  • Vibration signal
  • + and – buttons
  • 2x selector switch
  • Straight connecting cable, 1.5 m
  • Plug connector
ZSM2200-112033 (Sip. No. 112033)

Açıklama

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

+ and – buttons

These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.

2x selector switch (selector switch 4-stage Gray code / selector switch 12-stage Gray code)

The adjustable detent positions can be used as required for axis, speed or range selection, for example.

Cable

The high-quality connecting cables are available in a straight version.

Dimension drawing
Dimension drawing
Function sequence
Function sequence
Switching element
Switching element
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00972/20c_UL_us_E206093_4/1

Operating and display elements

ItemColorExtrasNote slide-in labelSwitching elementSlide-in labelVersionNumberDesignation1LED
Selector switch 4 positions1
Selector switch 12 positions1
- button1
Vibration motor1
+ button1

Electrical connection values

Connecting cable 23x0.14 mm² (screened)
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 50 V
Rated impulse withstand voltage Uimp 0.5 kV
Utilization category
DC-13 24 V 0.3 A (For additional controls)
DC-13 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Short circuit protection according to IEC 60269-1 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics 3-stage enabling switch
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Connection type Plug connector number of pins 17
Number of changeover contacts 3 (Connection as per block diagram)
Cable length
straight 1.5 m
Mechanical life 1 x 10⁶
Switching principle Snap-action contact element
Degree of protection IP54
Ambient temperature -5 ... +60 °C
Material PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Enabling switch
B10D 0.1 x 10⁶

Miscellaneous

in compliance with 60947-5-8

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 4,1 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 112033
Makale adı ZSM2200-112033
Ağırlık 0,7kg
Gümrük sınıfı 85371098
ECLASS 27-37-12-38 Agreement switch

Teknik Destek

Teknik Destek
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER End. Emn. Tek. Ltd. Sti.
+90 216 521-1000
info(at)euchner.com.tr

Çerez bildirimi

Web sitesinin çalışması için gerekli olan teknik olarak gerekli çerezleri kullanıyoruz. Buna ek olarak, web sitemizin kullanımını analiz etmek ve teklifimizi sürekli olarak iyileştirmek için bir istatistik çerezi kullanıyoruz. İstatistik çerezinin kullanımına izin vermek isteyip istemediğinize kendiniz karar verebilirsiniz. Daha fazla bilgiyi gizlilik politikamızda bulabilirsiniz.